Happy Beds LYON Wooden Bed User manual

Blake Wooden Guest Bed
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.
Page 1 of 5
Assemble in the room of use
DO NOT: jump on this bed frame.
DO NOT: use this bed frame if any parts are missing, damaged or worn.
DO NOT: use this bed frame unless all fixings are secured.
DO NOT: push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
DO NOT: use any power tools as this may damage the frame and will invalidate any claim.
Recommendation: Periodical re-tightening of fixings.
Warning
If this bed is placed on a non-carpeted floor you must place some protection
under all legs to stop the bed frame from moving. If this is not adhered to there is no
guarantee if the bed frame collapses.
This unit is heavy. Please use an assistant when lifting.
LYON Wooden Bed

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

PART LIST
PART DESCRIPTION BOX QTY
HARDWARE LIST (Found in box 2)
BOX QTYDESCRIPTION
PART
Page 2 of 5
1Headboard Frame
Headboard Left Wooden Post
Headboard Right Wooden Post
Footboard Frame
Side Rail - Left & Right
Footboard Right Wooden Post
Wood Slat
2
3
4
5
6
7
8
1
1
1
1
2
1
14
1/2
2/2
2/2
1/2
2/2
2/2
2/2
Footboard Left Wooden Post 2/2 1
M8 x 25mm JCBC Bolt
M6 x 90mm JCBC Bolt + Barrel Nut
M8 x 30mm Wood Dowel
Wood Button
#4 x 30mm Screw
2/2
2/2
2/2
2/2
2/2 8
8
8
8
12
A
C
D
E
B
M6 Allen Key
M8 Allen Key 2/2
2/2 1
1
F
G
9Metal Center Bar 2/2 1
#3.5 x 16mm Screw 2/2 2
H

Step 1 : Attach the Headboard Frame (1) to the Left (2) and Right (3) Wooden Post. Please secure using
hardware B,C,F and D.
Step 2 : Attach the Footboard Frame (4) to the Left (5) and Right (6) Wooden Post.
Please secure using hardware B,C,F and D.
Page 3 of 5
B
1
2
3
B
4
5
6
BACK VIEW
BACK VIEW
F
D
C
B
F
DB
CB
F
DB
C

Step 3 : Attach the Side Rails (7) to the Headboard (1) and Footboard (4) using Bolt (A) and Allen Key (G) as
shown.
Step 4 : Attach the Wood Slats (8) to the Side Rails (7) using hardware part (E) and fully tighten using a
screwdriver (not provided). After that fix Metal Center Bar (9) to the Side Rails using Screw (F). Please ensure
the bed slat located internally before fix in the Screw (F) as shown to prevent the bed slat fell down.
Page 4 of 5
7
7
G
A
8
1
4
E
EE
E
EE
E
E
E8 X
Complete Ready to Use
F
9

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes