Frontgate CASSARA PETITE 162987A NAT User manual

162987A NAT - CASSARA PETITE LOVE SEAT FRAME - NATURAL
Page 1 of 4

162987A NAT - CASSARA PETITE LOVE SEAT FRAME - NATURAL
PART LIST : HARDWARE :
Part # QTY Part # QTY
A. BACK REST 1 PC H1 ALLEN HEAD BOLT M6X70mmL 1 PCS
H2 ALLEN HEAD BOLT M6X50mmL 6 PCS
BSEAT 1 PC H3 WOODEN SCREW, 25mmL 2 PCS
H4 WOODEN SCREW, 40mmL 2 PCS
C RIGHT END 1 PC H5 WOODEN PLUG 4 PCS
FRAME
TOOLS NEEDED (INCLUDED) :
D LEFT END 1 PC T1 ALLEN KEY (Included)
FRAME T2 PHILLIP HEAD SCREW DRIVER (Not Included)
T3 GLUE PACKET (Included)
NUMBER OF PEOPLE TO INSTALL : ASSEMBLY TIME :
RECOMMENDED 2 Persons
APPROX 30 MINS
PRE ASSEMBLY INSTRUCTIONS:
1 Do not throw away packaging materials until the assembly is complete. Part might be
accidentally thrown away.
ASSEMBLY INSTRUCTION :
STEP 1 :
1. a Align the dowel of the Back Rest (A) to the center hole Seat (B), DETAIL 1, then attach
the Allen head Bolt M6x70mmL(H1) and tighten it by the use of Allen Key (T1) DETAIL 1a
Be sure that the assembled Seat and Backrest are held by one person, as stand in a
side way position, while the other person prepares the Right End Frame on step 2
Description
Description
A
B
A
B
DETAIL 1
T1
H1
DETAIL 1a
Page 2 of 4

162987A NAT - CASSARA PETITE LOVE SEAT FRAME - NATURAL
STEP 2 :
Lay the Right End Frame( C) , (a sticker on the seat base is attached to differentiate the
2.a 2 end frames) on the floor with holes facing up . Use the packaging material to protect
End Frame against the floor. See Figure 2a
Attached the 3pcs of Allen Head Bolt M6x50mmL(H2) and tighten it with the Allen Key (T1)
2.b Detail 2. See Fifuge 2b
Align the Left End Frame's mortise hole(D), to the tenon of the Seat (B) and Back Rest(A)
2.c See Figure 2c, then follow step 2.b
STEP 3:
Let the Love Seat stand on the floor, handled by 2 persons. Press the End frame (C, D)
3a manually againts the backrest (A) until no gap on the connections. Attach the wooden
screw 25mmL (H3) on the upper part of the Endframe(C,D) by using a Phillip head
Screw Driver (T2,Not Included), Detail 3, do the same on the other ends. On the middle
part of the end frame, attach the wooden Screw 40mmL(H4) and follow as per Detail 3
Apply a glue (T3) on the edge of the Wooden Plug (H5) by a hand brush (not included)
3b then insert it to the holes where the Wooden Screws (H3/H4) were installed, Detail 4
DETAIL 4
Sticker "RH"
A
B
Figure 2b
Figure 2a
Sticker "LH"
T1
DETAIL 2
DETAIL 3
H3
H4
A
B
H2
C
C
H3/4
H5
T3
T2
D
Figure 2c
Page 3 of 4

162987A NAT - CASSARA PETITE LOVE SEAT FRAME - NATURAL
ASSEMBLY IS COMPLETE
CARE & MAINTENANCE : Use mild detergent and water to clean. Store in dry, covered area when not
in use and at the end of the season. Occassionally check the nuts and bolts and re tighten if needed.
Wood is a natural material whose appearance will deteriorate when left outside. A finish should be
applied regularly to ensure that the wood is protected and to keep it looking at its best.
Frontgate offers a full range of professional solutions to help maintain the beauty of you teak.
For information about teak cleaning products please visit our website at www.frontgate.com or call our
product Specialist at 1-800-537-8484
Please contact one of Our Product Specialists for assembly assistance of questions at 1-800-537-8484 or
email [email protected]. Specialists are available weekdays 8:00 a.m. to 8:00 p.m.
EST or Saturday 9:30 a.m. to 6:00 p.m.
Page 4 of 4