Dorel DASE3583 User manual

MODEL #: DASE3583
NOTE:
THIS INSTRUCTION BOOKLET CONTAINS
UPC CODE:
0-65857-15562-4
5 PC DINING SET
PLEASE READ AND KEEP FOR
FUTURE REFERENCE
OWNER'S
MANUAL
IMPORTANT SAFETY INFORMATION
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
RETURN PRODUCT TO THE STORE.NOTDO If a part is missing or damaged, contact our
customer service department. We will replace the
part FREE of charge.
DATE OF PURCHASE:
ATTACH HERE
RECEIPT OF PURCHASE:
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
*
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Dorel Asia warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is solely
limited to the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way. This warranty
gives you specific legal rights and you may also have other rights which vary from State to
State. The warranty does not cover the wearing, tearing, fading or splitting of the leather.
WARNING: Should this product become
damaged, and/or components are broken
or missing, DO NOT USE.
Phillips head screw driver is not included.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly will require two people.
Estimated assembly time: 30 minutes.
CARE AND CLEANING
Dust table regularly with a soft, dry cloth to prevent soil build up. A dampened cloth may be
used occasionally to clean the surface. Dry immediately and buff lightly, following the grain.
Avoid using harsh cleaners and abrasive products.
Use coasters to prevent the formation of moisture rings and trivets to protect from hot items.
Cover extension leaves (if applicable) with a soft protective fabric before storing. Do not slide
objects across the surface - always lift them.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
DOREL ASIA LIMITED WARRANTY
E-MAIL: [email protected]
NOTES:
Ensure all parts and components are present before beginning assembly.
Assemble on soft, smooth surface to prevent damage to product finish.

2
HARDWARE LIST
NUT
8 PCS
FLAT WASHER
8 PCS
SPRING WASHER
8 PCS
Φ3/8"x22mm
1
4
Φ3/8"x15mm
FLAT WASHER
36 PCS
SPRING WASHER
36 PCS
7
8
9
10
SCREW
24 PCS
5
6
Φ1/4"x3"
Φ1/4"x2"
Φ1/4"x11mm
HEX SOCKET HEAD BOLT
20 PCS
ALLEN WRENCH
1 PC
Φ1/4"x19mm
5 PC Dining Set
Model #: DASE3583
ALLEN KEY
1 PC
HEX SOCKET HEAD BOLT
16 PCS
3
-1-

F
TABLE TOP
1 PC
LEFT SIDE STRETCHER
4 PCS
I
TABLE LEG
4 PCS
CHAIR LEFT LEG
4 PCS
CHAIR RIGHT LEG
4 PCS
C
BACK FRAME
4 PCS
D
SEAT FRAME
4 PCS
E
5 PC Dining Set
Model #: DASE3583
A
B
PARTS LIST
RIGHT SIDE STRETCHER
4 PCS
G
H
FRONT STRETCHER
4 PCS
BACK
FRONT
FRONT
BACK
-2-

STEP 1
5 PC Dining Set
Model #: DASE3583
Place table top (A) upside down on a smooth, flat surface to avoid any scratches.
Attach table legs (B) with nuts (3), spring washers (2), and flat washers (1).
Use Allen wrench (10) to tighten nuts (3).
Turn the table upright.
-3-

5 PC Dining Set
Model #: DASE3583
STEP 2
Attach seat frame (D) to back frame (C) with hex socket head bolts (6), spring
washers (8) and flat washers (9).
Secure the center of seat frame (D) to back frame (C) with hex socket head bolts (5),
spring washers (8) and flat washers (9).
Use Allen key (4) to tighten all bolts.
NOTE:Do not fully tighten bolts. Leaving them loose will facilitate assembly in the
following step.
-4-

Repeat Steps 2 & 3 to assemble the remaining chairs.
5 PC Dining Set
Model #: DASE3583
STEP 3
Insert front stretcher (G) to left leg (E) and right leg (F).
Insert side stretchers (H) & (I) into back frame (C).
Attach the assembled legs (E & F) to seat frame (D) with hex socket head bolts (5),
spring washers (8) and flat washers (9) while ensuring the side stretchers (H) & (I) line
up with the holes in the front legs. Use Allen key (4) to install all bolts.
Secure front stretcher (G) and side stretchers (H) & (I) to legs with screws (7) using a
Phillips head screwdriver (not included).
NOTE:Ensure the holes in stretchers are facing up so that the screws (6) will not
show once chair is upright. Once all bolts have been installed, apply a downward force
on the chair. This will help all legs to sit flush on the floor. Fully tighten all bolts installed
in step 2.
-5-

5 PC DINING SET
Model #: DASE3583
CAUTION: "This unit is intended for use only with
the products and/or maximum weights indicated. Use with
other products and/or products heavier than the maximum
weights indicated may result in instability or cause possible
injury ."
Congratulations! You've finished assembling your 5 PC Dining Set.
RETURN PRODUCT TO THE STORE.NOTDO
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
Product
Maximum
Weight
100 lbs
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
-6-

MODEL #: DASE3583
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Email: [email protected]
Customer Service Representative Mailing Address:
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
C
B
E
A
B
B
B
C
B
E
A
B
B
B
C
B
E
A
B
B
B