Happy Beds Pembroke 3+2 Drawer Chest User manual

Pembroke 3+2 Drawer Chest
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Vendor: S000238
3x
2x
1
2
15
16
3
4
4
5
5
6
7
7
8
8
8
8
8
8
8
8
9
9
10
12
13
14
17
18
19
20
21 16
17
22
23
23
23
23
11

Vendor: S000238
Recycle
2
m
01 2 345 6 7891 0
mm 1 1 1 2 1 3 1 4 1 5 1 6
HARDWARE LIST
Part Item Qty
Wooden dowel
A
C
D
J
85
86
30mm Screw
Tack 24
18mm Screw 16
60mm superb bar
E
F
4
8
Smooth shell pull
14mm Screw
B1
Wall Strap 1
Washer 2
I
H
PARTS LIST
Part Item Qty
11
12
1
3
2
4
2
5
1
6
2
7
8
8
2
9
110
111
1
12
1
13
Top Panel
Right Panel
Left Panel
Front Side Column
Back Side Column
Division Panel
Front Cross Member
Side Slide
Central Slide
Upper Rear Cross Member
Lower Rear Cross Member
Left Rear Panel
Right Rear Panel
114 H Profile
315 Drawer Front
** You will need a small mallet and a screwdriver.
516 Right Side Drawer
517 Left Side Drawer
318 Larger Drawer Back
319 Drawer Background
220 Smaller Drawer Front
221 Smaller Drawer Back
222 Lower Drawer Back
423 Foot

STEP 1: Insert the hardware (A) in the parts shown.
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
STEP 2: Fix the right panel (2) and the left panel (3) onto the front side column (4) and the back side column (5)
Cusing hardware ( ).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
C
C
C
C
C
C
C
2
C
C
4
C
C
4
5
A
A
8x
2x
A
A
16
16
5x
5x
A
A
2x
C
C
5
3
C
C
2x
8
9
1x
A
A
A
2
3
6
11
10
7
5
2
A
A
A
A
A
A
A
A

STEP 4: Attach the division panel (6) to the top panel (1) using hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
23
STEP 3: E 23Insert hardware ( ) to the foot ( ). Insert the foot into the right panel (2)
and the left panel (3).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
E
3
2
1
6
C
C
C
23
23
23
23
6
1

STEP 5: Fix the front cross member (7), the lower rear cross member (11)
and the upper rear cross member (10) onto the assembled right panel (2) and left panel (3) using hardware (c).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
STEP 6: Attach the assembled frame to top panel (1) using hardware (c).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
7
2
3
1
C
C
C
C
C
C
C
C
7
11
10
C
CC
C

STEP 7: Attach the side slide (8) and central slide (9) into the side of furniture using hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
STEP 8: Fix the left rear panel (12) and right rear panel (13) with the H profile (14) using hardware (J).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
J
a:
b:
9
9
6
C
C
C
C
C
C
8
8
8
8
8
8
8
8
C
13
12
14
C
C
C
C
Attention:
correct slide position
!

STEP 9: Fix the left side drawer (17) and the right side drawer (16) into the drawer front (15)
Cusing hardware ( ).
Insert the drawer background (19) between the left and right side drawers (17) and (16).
CFix the larger drawer back (18) to the left and right side drawers (17) and (16) using hardware ( ).
Fix hardware (F) onto the drawer front (15) using hardware (D).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
STEP 10: (C)Fix the left and right side drawers (17) and (16) onto the smaller drawer front (20) using hardware .
.Insert the lower drawer back (22) between the left and right side drawers (17) and (16)
Fix the smaller drawer back (21) to the left and right side drawers (17) and (16) using hardware (C).
Fix hardware (F) to the smaller drawer front (20) using hardware (D).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Vendor: S000238
C
C
C
C
3x
2x
a:
c:
b:
a:
c:
b:
16
17
15
18
19
20
16
17
21
22
C
C
F
D
D
F
C
C
F
D

Step 11 :The chest needs to be fixed to the wall.
Fix the wall strap (I) to the wall using washer (H) and a screw (not provided).
Insert wall strap through the hole in the back part of the furniture and
fix onto the top panel using washer (H) and 14mm Screw (B).
Wall plug and screw are not supplied to attach the wall strap to the wall.
The correct type of fixing must be used for your wall, seek professional advice if in doubt.
a:
b:
c:
wall
1
1
H
I
I
H
I
I
I
I
I
H
B
!
A
8
A
9
STEP 12: Insert the hardware (A) into the slides (8) e (9).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
A
A
A
A
A
A
A
A
A
A
Vendor: S000238

Vendor: S000238
Step 13: Insert the drawers as shown using hardware (A).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
AA
A
5x
A

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes