Happy Beds Salvador Bed User manual

Vendor: S000238
Page 2 of 6
Parts List Hardware List (found in Box 1)
Part Description Box Qty Part Description Qty
1 Headend anel 1 1 A 30 mm Wooden Dowel 11
2 Right Headend ost 2 1 B 40 mm Wooden Dowel 8
3 Left Headend ost 2 1 C 16 mm Screw 8
4 Side Rail 2 2 D 30 mm Screw 48
5 Slat 1 24 E 35 mm Screw 4
6 Centre Rail 2 1 F 32 mm Bolt 2
7 Support Leg 2 2 G
Nut
2
8 Footend anel 2 1 H 50 mm Bolt 2
9 Right Footend ost 1 1 J 110 mm Bolt 8
10 Left Footend ost 1 1 K 70 mm Bolt 4
11 Headend Rail 1 1 L
Elliptical Nut
4
12 Headend linth 2 1 M
Metal Bracket
2
** You will need a screwdriver, small mallet and
M11 spanner (not provided).
N Allen Key 1
O
Spacer
2

Vendor: S000238
Page 3 of 6
Step 1: Attach the support legs (7) to the centre rail (6) using hardware parts H and N.
Insert hardware part B to the side rails (4) using a small mallet (not provided).
DO NOT use any power tools as t is may damage t e frame and will invalidate any claim.
Step 2: Insert hardware part A to the headend panel (1), footend panel (8) and headend rail (11) using a
small mallet (not provided).
DO NOT use any power tools as t is may damage t e frame and will invalidate any claim.
Step 3: Attach the right headend post (2) and left headend post (3) to the headend panel (1) and headend
rail (11) using hardware parts J and N.
DO NOT use any power tools as t is may damage t e frame and will invalidate any claim.

Vendor: S000238
Page 4 of 6
Step 4: Attach the right footend post (9) and left footend post (10) to the footend panel (8) using hardware
parts J and N.
DO NOT use any power tools as t is may damage t e frame and will invalidate any claim.
Step 5: Fix hardware part M to the headend rail (11) and footend panel (8) using hardware part C and a
screwdriver (not provided).
DO NOT use any power tools as t is may damage t e frame and will invalidate any claim.

Vendor: S000238
Page 5 of 6
Step 6: Attach the side rails (4) to the headend posts using hardware parts K, L and N. Fix the centre rail (6)
using hardware parts F and G with an M11 spanner (not provided).
DO NOT use any power tools as t is may damage t e frame and will invalidate any claim.
Step 7: Attach the footend using hardware parts K, L and N and fix the centre rail (6) in place using hardware
parts F and G with an M11 spanner (not provided).
DO NOT use any power tools as t is may damage t e frame and will invalidate any claim.

Vendor: S000238
Page 6 of 6
Step 8: Secure the slats (5) in position using hardware parts D and O with a screwdriver (not provided)
making sure to start from the ends and work towards the middle. Attach the headend plinth (12) using
hardware part E and a screwdriver (not provided).
DO NOT use any power tools as t is may damage t e frame and will invalidate any claim.

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes