JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL EON315 REV L
Technical Manual
JBL EON315
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• System Power Rating: 280W continuous, 560W peak
• Frequency Response: 50 Hz – 18 kHz (± 3 dB) (EQ in “Flat”
position)
• Frequency Range: 38 Hz – 20 kHz (-10 dB) (EQ in “Flat”
position)
• LF Power Amp: 220W continuous at driver impedance
• HF Power Amp: 60W continuous at driver impedance
• Input Gain: Mic position: - Infinity to +40 dB
Line position:- Infinity to +4 dB (+20 dBu
Max signal input)
• Input Inpedance: 64 K ohms (balanced), 32 K (unbal
anced)
• Boost EQ: LF +3 dB Shelving Filter @ 150 Hz
HF +2.5 dB Shelving Filter @4 kHZ
• Low Cut Filter: Preset high pass @ 120 Hz
• Maximum SPL: 127 dB
• Crossover Frequency: 1.8 kHz
SYSTEM COMPONENTS:
• Baffe/Grille Assembly: 441956-001
• Low Frequency M115-2 380 mm (15 in)
Transducer:
• DC Resistance: 1.4 ohm ±10%
SYSTEM COMPONENTS:
(CONT’D)
• High Frequency 2414H-1 25.4 mm (1 in) polymer
Transducer: diaphragm, neodymium compression
driver
• DC Resistance: 3.60 ohm ±0.2%
• Input connector: Balanced XLR / 1/4 inch TRS combo
jack
• Output Connector: Balanced male XLR, +20 dBu (peak)
• XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
AURAL SWEEPTEST SPECIFICATIONS:
A. System Aural Sweep Test: 200V Input, 20 Hz to 20 kHz
Sweep Duration: 5 seconds
Volume Control Full Clockwise
B. L.F. Aural Sweep Test: 3.5V Input, 20 Hz to 2 kHz
C. H.F. Aural Sweep Test: .75V Input, 500 Hz to 1.5 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 685 x 438 x 366 mm D
(27 x 17.3 x 14.4 in D)
• Shipping Weight: 35 lb (15.9 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
PACKAGE WIRING DIAGRAM
Warranty 59660
Owners Manual
440940-001
(available from
web-site only)
Fillers, (2)
364823-001
Bag
322591-001
19” x16” x 42” LG
.003 THKLDPE CLR
Carton
364824-001
Cord, AC, Line
425-00000-00 120V
425-00000-01 230V
Driver, High Freq
2414H-1
(363858-001X)
Driver, Low Freq
M115-2
(365153-001)
Amplifier Assembly
Wire Harness Assembly
365375-001
--
++
SEE SCHEMATIC PAGE
11-12
BLU
0.250
BLU/BLK
0.205
GRN
0.250
GRN/BLK
0.205
