harmoni LUGOHS0440T User manual

INSTRUCTION
& INSTALLATION GUIDE
Digital electric radiator

2
Introduction
Harmoni digital radiators are manufactured with high quality components and include an exclusive elec-
tronic temperature programmer. Harmoni digital radiators meet all safety and eciency requirements and
are for xed installations only. Harmoni digital radiators include:
• TFT Screen
• Easy settings and programming
• Precise electronic thermostat
Read the instruction manual carefully to ensure correct operation of the product. It is very important to keep
the manual with the product after its installation.
Contents
1. Harmoni Technical Specications.......................................................................................................................................3
2. Installation & Safety precautions........................................................................................................................................4
2.1. Installation precautions..................................................................................................................................................4
2.2. Safety precautions..............................................................................................................................................................4
3. Harmoni system Installation................................................................................................................................................4
3.1. Mounting...............................................................................................................................................................................4
3.2. Fixing the supports.............................................................................................................................................................5
4. HarmonisystemInformation&Instructions.............................................................................................................................5
4.1. Touchpad...............................................................................................................................................................................5
4.2. Screen................................................................................................................................................................................6
4.3. Turn On and O...............................................................................................................................................................6
4.4. Submenu conguration.................................................................................................................................................7
4.5. Locking touchpad.................................................................................................................................................................8
4.6. Selecting MANUAL, AUTOMATIC or PILOTE MODE......................................................................................................8
4.7. Advance features of the harmoni system........................................................................................................................11
5. Maintenance & Cleaning......................................................................................................................................................11
6. Guarantee................................................................................................................................................................................12
7. Information requirements for Erp Directive. Commission Regulation (EU) 2015/1188........................................14

3
1. harmoni Technical Specications
MODEL LUGOHS0440T LUGOHS0660T LUGOHS0880T LUGOHS1100T LUGOHS1320T LUGOHS1540T
No. Elements 4 6 8 10 12 14
DIMENSIONS
Width (mm) 425 585 747 907 1,069 1,230
Height (mm) 575 575 575 575 575 575
Depth (mm) 98 98 98 98 98 98
Installed Depth (mm) 120 120 120 120 120 120
MECHANICAL CHARACTERISTICS
Armoured steel
heating element 
High purity
aluminium 
Thermal oil 
PC/ABS panel with
keypad 
Left side cover
PC/ABS 
Weight (kg) 8 12 16 20 24 28
Finish White RAL 9010
ELECTRICAL CHARACTERISTICS
Nominal Power (W) 440 660 880 1,100 1,320 1,540
Voltage (V) 230 V ~ 230 V ~ 230 V ~ 230 V ~ 230 V ~ 230 V ~
Current (A) 1.9 2.9 3.8 4.8 5.6 6.7
Power per Element
(W/Element) 110 110 110 110 110 110
INSTALLATION & PROTECTION
Template &
Installation Kit 
Safety thermostat 
Protection Grade IP 24 IP 24 IP 24 IP 24 IP 24 IP 24
2. Installation & Safety precautions (EN 60335 Standards)
Before switching on the product, please read the “Installation & Safety Precautions” in detail rst to ensure
the correct operation of the product.

4
2.1. Installation precautions
The product is designed for household or residential use. You are advised to have the product installed by
an authorized professional installer. Make sure the product is properly connected to 230V and is earthed.
2.2. Safety precautions
This appliance can be used by children aged from 8 years and above and persons
with reduced physical sensory or mental capabilities or lack of experience and
knowledge if they are supervised or have been given instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children should
not play with the appliance. Cleaning and user maintenance should not be carried
out by children without supervision. Children must be supervised at all times
to ensure that they do not interfere with the product.This product is lled with
a precise amount of special oil that does not need any maintenance. Any repairs
requiring the opening of the oil tank must only be done by an ocial harmoni
installer or its after-sales service personnel, who should also be notied should
an oil leak be noticed. The regulations on discarding oil when the heater is being
disposed of must be observed. If the power cable is damaged, it must be replaced
by the manufacturer, its after-sales service or authorized personnel in order to
avoid any damage.
DO NOT COVER. Do not dry clothes or towels on the heater nor leave
fabrics, magazines, spray cans, volatile substances or similar objects
within 250mm of the heater.
3. Harmoni system Installation
3.1. Mounting
The product works by means of natural air convection (Figure 1). In order to achieve optimal functioning
and an even distribution of heat, the lower part of the product, once mounted on the wall, must be at least
10-12cm from the oor, and 30cm at the most. As for the sides and above, a minimum distance of between
10-12cm must be left from any wall or brickwork in order for it to function correctly (Figure 2).
Minimu m
10 ccm.
c

5
3.2. Fixing the supports
Inside the packaging you will nd a xing kit. Please nd the instructions below:
1. Choose the right part of the
wall.
2. Place the mounting stencil on
the wall, marking the places for
the holes.
3. Remove the stencil and make
the holes in the wall.
4. Fix the supports using the
plugs and screws provided, or
others suitable for the wall type.
5. Check the correct positioning
of the lower support.
6. Align the product with the top
supports.
7. Place the product in the
supports.
4. Harmoni system Information & Instructions
4.1. Touchpad
Settings
/ Back
Decrease
Temperature
/ Move down
ON/OFF /
Conrm
Increase
Temperature
/ Move up
Manual mode/
Automatic mode

6
4.2. Screen
4.3. Turn On and O
To turn the product on press the button once. To turn o press the button again. When you turn the
product on for the rst time, it will ask you to set the date and time. Use the buttons to select the
correct time and press the button to conrm. Then use the buttons to select the correct minutes
and press . Use the buttons again to select the correct day and press the button to conrm.
4.4. Submenu conguration
Press the button to access the conguration menu. Then use the buttons to navigate to settings.
Press the button to access.
1Selected temperature
2Current time and day
3Heating element on
4Comfort mode
5Eco mode
6Anti-Frost mode
7Locked keypad
8Manual mode
9Automatic mode
10 Pre-program mode
11 Hourly programming
12 Open Windows indicator
13 Energy consumption
indicator
1
9
3
4
5
6
712
2
10
11
13
8

7
4.4.1. Set the day and time
To set the day or time select the CLOCK option.
Use the buttons to select the correct time and press the button to conrm. Then use the
buttons to select the correct minutes and press the button to conrm. Then use the buttons
to select the correct day and press the button to conrm.
4.4.2. Adjust brightness
This function allows you to adjust the brightness when the product is on or in standby.
To adjust the brightness, select BACKLIGHT. With the buttons you can turn the brightness up or
down. Press the button to conrm.
4.4.3. Language
This function allows you to change the language of the product.
To change the language, select LANGUAGE. Use the buttons to select the correct one and press .
4.4.4. Firmware
This option displays the current software version and the release date. To see this press the FIRMWARE
option.

8
4.5. Locking touchpad
To lock the keypad, press and hold the buttons together for 3 seconds. The symbol will appear
to the right of the screen.
To unlock the keypad, press and hold the buttons together for 3 seconds. The symbol will
disappear from the right of the screen.
4.6. Selecting Manual, Automatic or Pilot mode* (*Not available in this product)
To select MANUAL, AUTO, PRE-PROGRAMMING or PILOT MODE, access the programming menu by pressing
the button.
MODE – allows you to select between MANUAL or AUTOMATIC mode.
PRE-PROGRAMS – allows you to select one of the 4 default programming schedules.
USER PROGRAM – allows you to edit or create programming.
PILOT WIRE – allows you to activate external control of the product via the pilot wire (not avaiable).
4.6.1. MANUAL mode
When Manual mode is selected, the screen will show: the temperature, the manual icon , the comfort/
eco/anti-frost icon, consumption indicator and time and day of the week.
In Manual mode you can choose a temperature and the corresponding icon will be displayed on the screen
according to the ranges set in the table below:
COMFORT 19 - 30 oC
ECO 7.5 – 18.5 oC
ANTI-FROST 7 oC

9
To adjust the temperature:
Use the buttons to increase or decrease the temperature respectively.
When the room temperature is lower than the temperature marked on the radiator, the product will display
a symbol in the upper left of the screen.
4.6.2 AUTOMATIC mode
When automatic mode is selected, the programming already established in the product will be activated.
You can choose between the four pre-installed schedules in your harmoni product:
Pre-programs:
COMFORT ECO OFF
PRE-PROGRAM 1
012345678910 11 12 13 14 15 16 17 18 19 20 21 22 23
L-V
S-B
PRE-PROGRAM 2
012345678910 11 12 13 14 15 16 17 18 19 20 21 22 23
L-V
S-B
PRE-PROGRAM 3
012345678910 11 12 13 14 15 16 17 18 19 20 21 22 23
L-D
PRE-PROGRAM 4
012345678910 11 12 13 14 15 16 17 18 19 20 21 22 23
L-V
S-B

10
If you want to create your own programming:
STEP 1
1. Select COMFORT:
Temperature between: 19 – 30°C.
Use the buttons to adjust the temperature. Press to conrm.
2. Select ECO:
Temperature between: 7.5 – 18.5°C.
Use the buttons to adjust the temperature. Press to
conrm.
3. Select ANTIFROST or OFF:
Between: 7°C – OFF.
Use the buttons to adjust the temperature. Press to
conrm.
STEP 2
1. Select the days:
You can select the days to include in programming by a short press on
the button.
The days marked must be highlighted by a box.
Use the buttons to move between the days. Press after
day 7 to go to the next step.
STEP 3
1. Select the programming mode for the hours:
Use the buttons to move between the hours. Select a pro-
gramming mode (COMFORT / ECO / ANTI-FROST) for each hour using
the button. One press will select COMFORT, another press for ECO
and a third press selects ANTI-FROST.
a. In the top right it will indicate which hour you are programming.
b. In the left side it will show you the days selected.
c. The programming bar will show.
I. COMFORT mode: 2 lled squares
II. ECO mode: bottom lled square
III. ANTI-FROST/OFF mode: 2 empty squares
Once you have programmed a mode for every hour, press to conrm
and save your programming

11
4.7. Advanced features of the harmoni system
The harmoni system includes three advanced functions: Open Windows, Balance and Adaptative Mode. To
activate or deactivate one of the functions below, press the button to access the settings menu. Use the
buttons to scroll through the menu until you nd the POWER submenu. Press the button to
access the submenu:
By accessing each of them, you can activate or deactivate its operation. Once selected, press the button
and use the buttons to activate or deactivate the function. Press the button once more to
conrm the option.
4.7.1. OPEN WINDOWS function
The harmoni system has the OPEN WINDOWS function activated as a default. This function is activated
when the sensor detects that there has been a temperature decrease of 4°C in a period of 30 minutes. The
OPEN WINDOWS mode is activated for two hours. When the OPEN WINDOWS mode is active, the radiator will
be in ANTI-FROST mode at 7ºC.
4.7.2. BALANCE function
The BALANCE submenu causes the product to work in Manual mode with a constant temperature of 19ºC.
Once selected, the product returns to the main screen, with the temperature set at 19ºC and the MANUAL
function icon activated.
4.7.3. ADAPTATIVE mode
Adaptive mode allows the product to learn how long it will take to heat the room to your desired temperature.
It predicts the ideal time to activate the heating element to reach the temperature set, at exactly the right
time you programmed, saving you time, energy and money.
5. Maintenance & Cleaning
The product does not require any type of maintenance. We recommend that all parts of the product are kept
clean (behind, underneath, upper ns, etc.). Do not use any abrasive product on the aluminium. Clean it with
a damp cloth and a pH neutral soap, and the control panel with a dry cloth.

12
European Directive 2012/19/UE
Under the European Directive 2012/19/UE on waste electrical and electronic equipment (WEEE), the product
cannot be disposed in the usual council bins and containers. They must be separated to optimize the
recovery and recycling of all of the components and materials and reducing the impact to human health and
the environment. The symbol of the container crossed out over a horizontal line is marked on all of harmoni
products to remind the consumer of the obligation to separate them on disposal. The consumer should
contact the local authority or original point of sale to learn more about the correct disposal of this product.
6. Guarantee
In this section, we hereby describe the guarantee conditions which the buyer acquires on buying a new
harmoni product. These conditions comply with all the rights construed in the national legislation in force, as
well as any additional rights and guarantees which are oered by harmoni.
6.1. Any incident that you might detect in your harmoni product can be sorted by the product seller or quickly
by the manufacturer. Please contact harmoni by telephoning 01473 559088 for technical support.
LUGO 1100
LUGO 10 EL
You will need to state the product reference (located on the label indicating product features), serial number,
proof of purchase and the type of incident at hand when contacting us so that we can check the guarantee.
In addition, please attach a copy of the product invoice.
6.2. Harmoni guarantees that there are no material defects of design or manufacture at the time of original
acquisition and guarantees the aluminium for a period of 120 months and 24 months for any electronic and
electrical components.
6.3. If during the guarantee period, the product does not work correctly under normal use, and any design,
material or manufacturing defect is found, harmoni will repair or substitute the product as it may see t, in
accordance with the terms and conditions as follows:
6.3.1. The guarantee is only applicable if the original guarantee is issued by the seller and when the said
guarantee is lled in correctly including product reference, series number (marked on the product’s label
indicating technical features), purchase date and the seller’s stamp.
Harmoni reserves the right to reject the guarantee service when this information has been removed or
modied after the original product purchase.
6.3.2. The guarantee only applies to those cases that concern material, design and manufacturing defects,
and under no circumstances covers damage to the product for the following reasons:

13
6.3.2.1 Incorrect use of the product, i.e. used for other purposes that are not construed as its normal
use or for not respecting the instructions of use and maintenance given by harmoni as well as incorrect
installation or use of the product that may not comply with the current technical standards of safety.
Corrosion caused by direct exposure to salt water is excluded from the guarantee. When the product is
installed no more than 200m from the coast the guarantee for damages caused by corrosion the period will
be reduced by 50%.
6.3.2.2 Any unauthorized repairs carried out by unauthorized technicians or opening of the product
by unauthorized people.
6.3.2.3 Any accidents that are deemed outside the control of harmoni, such as lightning, res, oods,
public disorders, etc.
6.3.3. Any repairs or substitutions that are included in this guarantee do not allow any additions or new
periods of guarantee.
6.3.4. Any repairs or substitutions covered under this guarantee must be parts that are functionally
equivalent. The defective parts or parts removed or replaced shall become the property of harmoni.
6.4. The technical service of harmoni will advise you if you need to buy any parts not covered under the
guarantee or out of guarantee.
6.5. This guarantee does not aect the buyer’s legal rights stipulated in the current national legislation, nor
aects those rights against the distributor or installer that could come forth in compliance with the purchase
contract.
6.6. In the absence of a national legal legislation applicable, this guarantee shall prevail and may be construed
as the buyer’s only protection. Harmoni, its oces, distributors and installers may not be held responsible
for any accidental damage that emerges due to infringement of any rules implicitly related to this product.

14
CONTACT DETAILS Harmoni | Edison House | Edison Close | Ransomes Europark | Ipswich | Suolk IP3 9GU | T: 01473 559088
7. Information requirements for Erp Directive. Commission Regulation (EU) 2015/1188.
*Not applicable
Item Symbol Unit LUGOHS0440T LUGOHS0660T LUGOHS0880T LUGOHS1100T LUGOHS1320T LUGOHS1540T
HEAT OUTPUT
Nominal heat output Pnom kW 0,4 0,7 0,9 1,1 1,3 1,5
Minimum heat output (indicative) Pmin kW N.A.* N.A.* N.A.* N.A.* N.A.* N.A.* Maximum continuous heat output Pmax,c kW 0,4 0,7 0,9 1,1 1,3 1,5
AUXILIARY ELECTRICITY CONSUMPTION
At nominal heat output elMAX kW 0,440 0,660 0,880 1,100 1,320 1,540
At minimum heat output elMIN kW 0,440 0,660 0,880 1,100 1,320 1,540 In standby mode elSB kW 0,0008 0,0008 0,0008 0,0008 0,0008 0,0008
TYPE OF HEAT OUTPUT/ROOM TEMPERATURE CONTROL (SELECT ONE)
Single stage heat output and no room temperature control – – – – – –
Two or more manual stages, no room temperature control – – – – – – With mechanic thermostat room temperature control – – – – – – With electronic room temperature control – – – – – – Electronic room temperature control plus day timer – – – – – – Electronic room temperature control plus week timer
OTHER CONTROL OPTIONS (MULTIPLE SELECTIONS POSSIBLE)
Room temperature control, with presence detection – – – – – –
Room temperature control, with open window detection With distance control option – – – – – –
With adaptive start control With working time limitation
With black bulb sensor – – – – – – SEASONAL SPACE HEATING ENERGY EFFICIENCY ηs39,0% 39,0% 39,0% 39,0% 39,0% 39,0%

15
GUARANTEE CERTIFICATE
Please ll in the product details below:
PRODUCT
REFERENCE NO.
PRODUCT
SERIAL NO.
PRODUCT NAME PURCHASE DATE*
Please ll in your details below:
FIRST NAME SURNAME
ADDRESS
COUNTY
POSTCODE TELEPHONE NO.
EMAIL
In order to obtain the harmoni guarantee, an authorised installer/electrician must ll in the details below:
INSTALLER /
ELECTRICIAN
NAME
INSTALLATION
DATE* PRODUCT NAME
STAMP* SIGNATURE
PLEASE NOTE:
This Guarantee Certicate must be completed in full in order to obtain guarantee rights. The purchase date,
installation date and the stamp are compulsory. Please keep the completed guarantee safe.
* Compulsory elds to be completed.
Please cut along the dotted line.

harmoni
Edison House
Edison Close
Ransomes Europark
Ipswich
Suolk IP3 9GU
T: 01473 559088
IMHRUK21V1
harmoni cannot accept any responsibility for any errors in catalgoues, brochures and other printed materials. harmoni reserves the right to al-
ter its products without notice.This also applies to products already on order provided that such alterations can be made without subsequent
changes to specications already agreed. All trademarks in this material are the property of harmoni. harmoni and the harmoni logotypes are
trademarks of Edison House Ltd. All rights reserved.