Harmonic MediaGrid ContentServer 4000 User manual

Harmonic MediaGrid ContentServer 4000
Quick Reference Guide
Front Panel Components
Rear Panel Components
[phone] (Russia, CIS), [phone] (Japan), [phone] (China, mainland)
Harmonic Technical Support: [phone] (Americas), [phone] (Asia Pacific), + 44 1252 555 450 (EMEA),
4 Control panel2 Bezel LED control connector 3 Power button
1 Disk drives
Numbered 0-23, starting at top left
006-0217-001 Rev. B
Controller A
Controller B
1 Power supply units
2 Serial port
3 VGA port
4 BMC port
5 USB ports
6 SAS ports
7 10 GbE NIC ports
8 Onboard SAS ports
2
3
4
1
2
4
678
5
3Unused
1
PCIe slots 6 - 1 (left to right)
B
A

Control Panel LEDs
[phone] (Russia, CIS), [phone] (Japan), [phone] (China, mainland)
Harmonic Technical Support: [phone] (Americas), [phone] (Asia Pacific), + 44 1252 555 450 (EMEA), 006-0217-001 Rev. B
Operational State Indicator
Green System is running
Off System is off
Fault Indicator
Off No critical errors
A critical error has occurred
Yellow
10 GbE Port LED
Green (Solid) Active connection at 10 Gb/s
(Blink) Network activity
Off Power off (network cable unplugged)
Disk Drive LEDs
A
B
Operational State LED
Operational State LED
Fault LED
Fault LED
Controller A
Controller B
Power Supply Unit LED
Green AC power is present and at least
one controller is operating
Red AC power is present and
one of the following is true:
- both controllers are stopped
- a fault has occurred in the
power supply unit
Activity LED
(Blue )
Status LED
(Red )
Solid
Blink
Slow blink
(1Hz)
Off
Drive failure
Off
Drive is
powered on
Drive state
Drive activity
RAID rebuild
Activity LED Status LED
Off
Solid
Drive is being
winked
Rapid blink (2Hz)
Slow blink (1Hz)
Blink
Note: The ContentServer 4000 requires Harmonic MediaGrid firmware version 4.0 or later.