Harrod FBL-849 User manual

ASSEMBLY INSTRUCTIONS
i
i
*Goal and Net sold separately
2 people are recommended for this assembly
Estimated 45 minutes assembly time per goal (not including time for concrete)
INS849
Revision 0
06/07/2016
FBL-849
Stadium Pro Freehanging Net Supports-2Post
45
mins
IMPORTANT: Please read these assembly instructions carefully before
starting to assemble your Freehanging Net Supports
IMPORTANT: mustThe sockets be installed in a minimum of 0.6m of
concrete. Consult a construction engineer for advice where required
3

Pack Contents
Page 1
17mm
6mm
Code
Product
FBL-849
Stadium Pro Freehanging Net Supports-2Post
Tools Required
17mm Spanner
6mm Allen Key
Spirit Level
1.
x4
FEP833
Stadium Pro F/Hang Net Supports
1. Stadium Pro F/Hang Post
7.
x4
BOL739
2. M10 Nyloc Nut
3. M10x40mm Bolt
4. M10x25mm Square Screw
5. M10 Handwheel
6. M10 Washer
7. M10 Nylon Spacer
8. Carbine Clip
9. Top Strap Bracket
10. Security Wire Bracket
11. Winch Bracket
12. Strap
13. Socket Drop-in Lid
14. Socket
15. Winch
16. Security Wire*
* part not shown
** parts are not to scale
Fittings Pack Contents
2.
x12
BOL202
3.
x4
BOL321
4.
x16
BOL336
5.
x4
BOL399
6.
x12
BOL709
Optional Extras
FBL-848
FBL-851
Stadium Pro Goal
Stadium Pro Hinged Net Support
FBL-308 4mm Box Net

Fittings Pack Contents
i
Code
Product
FBL-849
Stadium Pro Freehanging Net Supports-2Post
Page 2
Fittings Pack (cont.)
2. M10 Nyloc Nut
3. M10x40mm Bolt
4. M10x25mm Square Screw
5. M10 Handwheel
6. M10 Washer
7. M10 Nylon Spacer
8. Carbine Clip
9. Top Strap Bracket
10. Security Wire Bracket
11. Winch Bracket
12. Strap
13. Socket Drop-in Lid
14. Socket
15. Winch
16. Security Wire*
* part not shown
** parts are not to scale
IMPORTANT: Please quote
part numbers when ordering
replacement parts
15.
x4
WIN006
13.
x4
WEQ325
12.
x4
STR845
14.
x4
WEQ364
11.
x4
PEP846
9.
x4
PEP842
10.
x4
PEP844
8.
x4
HKS008
Additional Parts (sold separately)
17. Goalposts
18. Net
19. 2 Post Headline
20. Cable Ties

Page 3
Socket Installation
1.08m
IMPORTANT: must awaySockets be leant back 3° diagonally from the
goal, as indicated by the arrows above
i
3°
600mm
600mm
Ground Level
40-100mm
Code
Product
FBL-849
Stadium Pro Freehanging Net Supports-2Post
1Dig holes at a 600mm and concrete in Sockets (14), leaving 40-100mm from top of
concrete to ground level
minimum 3
14
PLAN VIEW
1m
IMPORTANT: Consult a construction engineer for advice where
required. Ensure concrete has fully hardened before proceeding with
your assembly
i
17
9.422m
Drainage Hole

Page 4
Assembly Instructions
9
2
6
15
10
5
1
7
3
4
11
6
2
Code
Product
FBL-849
Stadium Pro Freehanging Net Supports-2Post
TOP OF POST
17mm
6mm
HINT: Place Winch and Security Wire Bracket at a comfortable height
on the Post. These can be adjusted later during the assembly
1

Page 5
Code
Product
FBL-849
Stadium Pro Freehanging Net Supports-2Post
3Attach Security Wire (16) to a Carbine Clip (8) and connect to the Security Wire Bracket on of the
Posts. Feed Wire around the Winch, behind the Strap and through loops in the Strap Bracket
one
both
9
15
12
2Thread Strap (12) through the larger loop in the Strap Bracket (9) and feed into the slot in the Winch
(15). Operate Winch until Strap has passed around the hub and will slip when pullednot
16
8

Page 6
Code
Product
FBL-849
Stadium Pro Freehanging Net Supports-2Post
12
5Attach outside carbine clips to the corner mesh
19
4Insert Posts in Sockets and attach one end of Headline (19), packed with Net (18), to a Strap. Thread
Headline through corner of Net, out the opposite corner and attach to Strap on other Post
19
18
17

Page 7
Code
Product
FBL-849
Stadium Pro Freehanging Net Supports-2Post
6Evenly tension the Headline. Thread Security Wire through Net, through both loops in the Strap
Bracket on the opposite Post and connect to the Security Wire Bracket. Distribute the Security Wire
evenly between the Posts
20
19
18
7Remove any sag from the roof of the Net. Secure the top edge of the Net to the Headline and
Security Wire using the Cable Ties (20) supplied. Fasten Cable Ties by each knot and cut off excess
for minimal visibility. Tension the Security Wire to complete the box shape
16
16
16
10
8
16
10
WARNING: Do not overtension the system as this can
result in damage to the product
!