HARTINGTON MORTIMER Series User manual

Powder-coated aluminium frame
Hand woven synthetic rattan
Sofa - H98 x W182 x D83cm
Corner section - H98 x W200 x D83cm
Foot stool - H40 x W40 x D40cm
Corner Sofa
MORTIMER COLLECTION
Important
Please read these instructions before using the product. Retain instructions for future use.
HHGL Limited, MK9 1BA HHGL (ROI) Limited, D02 X576

2
SAFETY & CARE ADVICE
IMPORTANT INFORMATION
Please read these instructions fully before starting assembly.
• Check that you have all the components and tools listed in this booklet before starting assembly.
• Removeall fittingsfrom their plasticbags and separate them intotheir groups.
• Keep children and animals away fromthe work area; small parts could choke if swallowed.
• Make sure you have enough space to lay out the parts before starting.
• Do not stand or put weight on the component parts during assembly, as this could cause damage.
• Assemble on a soft,level surface to avoid damaging the unit or yourfloor.
• Two-person assembly is recommended.
• Dispose of allpackaging materials carefully and responsibly.
• Assemble the item as close to its final position as possible.
• PLEASE NOTE: The cushions are not weatherproof and should be stored indoors ifnot used.
• Only clean using a damp cloth and mild detergent; do not use bleach or abrasivecleaners.
• This product should not be discarded with household waste. Take to your local authority waste
disposal centre.
• To prolong the life of this unit, we recommend it is stored inside during winter or extended periods
of bad weather.

R u le r - U s e th is ru le r to h e lp corre ctly ide n tify th e s cre w s
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
3
COMPONENTS - FITTINGS
Please check you have all fittings listed
below. If you have any missing or
damaged fittings, please contact your
local store.
Note: The quantities below are the correct
amount to complete the assembly. In some
cases, more fittings may be supplied than
required.
Pleasecheck you have all components
listed below. If you have any missing or
damaged components, please contact
your localstore.
COMPONENTS -PANELS
A
Sofa
Back cushion
Back cushion
Back cushion
Seat cushion
Seat cushion
Corner
Stool
B
C
D
E
F
G
H
1
1
2
5
1
1
2
2
Joiningclip
I2

I
A
B
DDDD
GG
D
E F
ASSEMBLY INSTRUCTIONS - SOFA
Step 1
Use joining clip Ito combine the sofa Aand corner Btogether.
Step 2
Put the seat cushions Gand backcushions D, E and F onto the sofa and corner, as the picture shows.
4
X2

ASSEMBLY INSTRUCTIONS - STOOL
H
C
Step 3
Put the seat cushion H onto the stool C.
5
ASSEMBLY COMPLETE