Coaster 193498B1 User manual

ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
193498(B1&B2)
Counter Height Table
REVISION 0 : 11/05/2020 PAGE 1 OF 3 COASTERFURNITURE.COM

ITEM:
193498(B1&B2)
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
WARNING!
2. This product is for home use only and not intended for commercial establishments.
ASSEMBLY TIME
B1 (BOX 1)
B2 (BOX 2)
HARDWARE IDENTIFICATION
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 193498 (B1)
1ALLEN WRENCH
(M5 - BLK) 1PC
2BOLT
(M6 x 90mm - RBW) 8PCS
3LOCK WASHER
(M6 x RBW) 8PCS
4PLASTIC DOWEL
(M8 x 30mm - BLK) 4PCS
5WAFER HEAD SCREW
(M4 x 25mm - BLK) 16PCS
6 WOOD PLUG 8PCS
7LEVELER
(23mm - BLK)
4PCS
NOTE:
Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
COASTERFURNITURE.COM
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
PARTS IDENTIFICATION
20 MINUTES
PAGE 2 OF 3
C
A
2PCS
1PC
LEG FRAME
TOP
B CROSSBAR 2PCS
1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.

ITEM:
193498(B1&B2)
ASSEMBLY INSTRUCTIONS
STEP 1
STEP 2
STEP 3
COASTERFURNITURE.COM
PAGE 3 OF 3
COMPLETE
1.2
1.1
2.1
2.2

ITEM:
193498(B1&B2)
COASTERFURNITURE.COM
Note : Dimension tolerance ±5%
35.82"
16.93"
43.30"
70.87"
33.07"
27.56"
35.43"