PLEASE KEEP ME WITH YOUR PROOF OF PURCHASE FOR FUTURE REFERENCE
For replacement or lost spare parts please go to http://faq.hartmanuk.co.uk/spares/
Should you have any queries about your furniture your first point of contact should be the retailer from whom
you purchased your product
ASSEMBLY INSTRUCTIONS
Heritage Hanging Chair (SINGLE)
(68038145 / 68038146 )
ATTENTION:
1. Please read these instructions carefully before assembly
2. Aluminium is soft metal and over tightening may strip thread or break the part
3. DO NOT use power tools
4. Please allow 30 minutes for assembly
5. Although assembly only requires 1 person it is advised that a second person be present to help turn the product over and into position
when fully assembled
ASSEMBLY STEPS:
1. LOOSELY attach hanging tube (A) to the base (B) with bolts (H) & (I), big flat washers (J) and Locknut (L) using spanner (N) DO NOT
TIGHTEN BOLTS AT THIS STAGE
2. Tighten all bolts one by one with spanner (N) being careful not to over tighten any as this will cause the thread to become damaged
3. Place Nut cap (K and M) on all visible bolts (H & I) and locknut (L)
4. Insert metal bolt (E) into the hole on top of each hanging tube
5. Screw the metal hook (G) into the thread at the top of the basket (C), then hang the basket to the pole using the chains (D) to connect
the metal bolt on top of the pole and hook on the basket
6. Place the cushion (F) on the seat
7. Attach the safety cord to the basket, using the karabiner hook onto the ring at the back of the base tube –WE NEED ILLUSTRATIONS
AND IMAGES FOR THIS ADDITIONAL POINT PLEASE
For more information regarding maintenance of your furniture please visit
http://www.hartmanuk.co.uk/after_care_videos.html