Hasbro Nerf Hyper MACH-100 User manual

TRIGGER
CLEARING A JAM
STORING YOUR BLASTER
MACH-100
™
Open access door to remove any jammed rounds.
Make sure you aim the blaster away from you and
anyone else while releasing jammed rounds.
Close access door. Door must be fully
closed for blaster to fire.
Do not store blaster primed and ready to fire.
14
+
3
1
2
NERF and HASBRO and all related trademarks and logos are trademarks of Hasbro, Inc.
© 2020 Hasbro. TM & ®denote U.S. Trademarks.
Hasbro, Pawtucket, RI 02861-1059 USA. US/CANADA TEL. [phone].
Retain this information for future reference.
E8911 PN00065923
Hey NERF Nation!
Join us online and keep up with
the latest and greatest NERF news!
ACCELERATION BUTTON
TACTICAL RAILS
Attach Nerf Hyper™ canisters to rails for additional capacity. (Canisters not included.)
FILL LINE
Do not fill
beyond this
line.
Nerf Hyper rounds
are compatible
only with Nerf
Hyper blasters.
Pro Tip: Open FULLY
to load.
Must be fully closed
for blaster to fire.
Pro Tip: HOLD DOWN to power
up motor.
HOPPER LID ACCESS DOOR
TO AVOID EYE INJURY:
WARNING: Do not aim at eyes or face.
Use of eyewear required for players and people within
range. Use only official Hyper rounds. Do not modify
rounds or blaster. Ages 14 and up.
READ ALL INSTRUCTIONS
COMPLETELY BEFORE USE.

Not included. LOAD
FIRE
Move trigger lock to unlocked
position. Access door must be fully
closed for blaster to fire.
Press and hold acceleration button,
and pull trigger to fire multiple rounds.
Make sure trigger lock is locked. Lift hopper lid. Add rounds to hopper. DO NOT OVERFILL.
Includes 80 rounds; additional rounds not included.
Close lid. Hopper lid must be fully closed
for blaster to fire.
1 2
1 2 3
TRIGGER LOCK
On side of blaster, move trigger lock
down to lock trigger and up to unlock.
Always put the trigger lock in locked
position when blaster is not in use and
when storing blaster.
X100
MAXIMUM
1
2
ACCESS DOOR
IMPORTANT: BATTERY INFORMATION
Retain this information for future reference. Batteries should be replaced by an adult.
CAUTION:
TO AVOID BATTERY LEAKAGE
1. Always follow the instructions carefully. Use only batteries specied and be sure to insert them correctly by
matching the + and – polarity markings.
2. Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.
3. Remove exhausted or dead batteries from the product.
4. Remove batteries if product is not to be played with for a long time.
5. Do not short-circuit the supply terminals.
6. RECHARGEABLE BATTERIES: Do not mix these with any other types of batteries. Always remove from the product
before recharging. Recharge batteries under adult supervision. DO NOT RECHARGE OTHERTYPES OF BATTERIES.
Should this product cause, or be aected by, local electrical interference, move it away from other electrical
equipment. Reset (switching o and back on again or removing and re-inserting batteries) if necessary.