Hatari IQ22M1 User manual

User Manual
Thank you for choosing to buy a Hatari appliance.
To ensure safety and optimal usage, please read the instructions carefully before using. Retain this manual for future reference.
www.hatari.co.th
Hatari Electric Co., Ltd.
10 Rama 2, Soi 94, Samaedam, Bangkhunthian, Bangkok 10150, Thailand
Tel
Fax
Email
: [phone]
: [phone]
: [email protected]
Industrial Fan
Model: IQ22M1
PRODUCT SPECIFICATIONS
Model
Size
Voltage
Electric Power
Electric Current
Service Value
IQ22M1
550 mm
220-240V 50/60Hz
197-264W
0.93-1.14A
0.92 m3/min/W
Item code: 1002260 REV.02

1 2
ASSEMBLY INSTRUCTIONS
Plug in the fan and press the fan speed button 1, 2, 3 respectively. If the fan makes a loud noise, check if the blade cap is fitted tightly
and whether the grooves on the blade fits the corresponding catches of the motor shaft.
Insert the rear grille and tightly attach the
screws (6) and spring washers (7) to the
front motor cover according to the 4
indicated positions.
3
Place the blade onto the motor shaft,
ensuring that grooves of the blade fit with
the catch, then place the blade cap over
the blade, tightening it by twisting it in the
direction as shown by the arrow
(TIGHTEN).
4
Place the front grille onto the fan with the
lock on the edge of the grille interlocking
with the top part of the rear grille. Use
your hands to press the grille ring in all
directions, then tighten the screw on the
grille ring using a screwdriver.
5
Attach the leg cover (17) to the
fan legs (16) and secure it tightly
to the four legs with the screws
(18) and washers (19).
1
Insert the upper stand (14) to the
legs set (16) (as shown by the
diagram). Adjust the height as
desired by turning the height
adjustment knob, fix the desired
height by tightening the button.
2
CAUTION
Unplug the fan before cleaning or changing fan components, and when not in use for a long period of time.
Do not use the fan if not all components are assembled or if components such as blade cap, blade or grille are found to be
defective.
The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance
in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
1.
2.
3.
4.
5.
6.
CARE AND CLEANING INSTRUCTIONS
1.
2.
3.
Use a damp cloth to wipe stains, and then dry the area by wiping.
When cleaning fan, be careful not to let the wire, switch, motor and other electrical components get wet.
Do not use chemical products, thinner solvents, alcohol, kerosene or petrol to clean the fan.
FAN COMPONENTS
DECO
FRONT GRILLE
GRILLE RING
BLADE CAP
FAN BLADE
REAR GRILLE SCREW
SPRING WASHER
REAR GRILLE
MOTOR
OSCILLATION KNOB
REAR MOTOR COVER
NECK JOINT SET
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
1
32
11
12
13
14
15
18
19
17
9
4 5 6 7 8
16
20
21
10
Plug power supply cord into a 220-240V, 50/60Hz power socket.
DIRECTION OF USE
3 adjustable fan speed settings 0: off, 1: low speed, 2: medium speed, 3: high speed
Push the oscillation knob down to activate left-right movements. Pull the oscillation knob up to cease
movement.
Tilt the grille upwards or downwards according to the desired wind direction.
Fan Speed Adjustment
Swing Adjustment
Fan Angle Adjustment
1.
2.
3.
1.
2.
3.
4.
5.
6.
7.
The fan components should be assembled correctly according to the manual to prevent possible harm that may occur while in
use.
The fan should not be placed or installed in areas that are of extreme temperatures or near stoves, or in areas that are wet with
high humidity, or has hydrocarbon vapors such as petroleum.
The fan should not be operated near curtains or mosquito nets because the fan may suck in the light material and entangle them
with the blades, possibly causing harm.
Do not spray all types of spray into the fan; for example, hairspray or cleaning spray.
Do not insert fingers, pencils or other objects into the grille while the blades are spinning as it may result in possible injury or
physical damage.
If a component such as blade, grille, blade cap, or the rear grille lock is damaged, replacement can be made using a new component.
Please refer to the assembly instructions.
If an electrical component such as power cord, motor, or switch is damaged, it must be replaced by the manufacturer, its service
agent or a qualified person in order to avoid hazards. It is not advisable to fix the fan at home.
USAGE RECOMMENDATIONS
13.
14.
15.
16.
17.
18.
19.
20.
21.
FAN SPEED BUTTONS
UPPER STAND
HEIGHT ADJUSTMENT KNOB
FAN LEGS
LEG COVER
SCREW FOR SECURING FAN LEGS
WASHER
LEGS BASE PROTECTIVE RUBBER
POWER SUPPLY CORD