Hatteras Hammocks bht46 User manual

46” & 72” BAR & COUNTER HEIGHT TABLE
INSTRUCTIONS
46” TABLE PICTURED
STEP 1. Insert Fascia Plates and Spreader Bars then use (16) 3” screws
to attach to leg assemblies.
ASSEMBLY
• (1) TABLETOP
• (2) LEG ASSEMBLIES
• (2) FASCIA PLATES
• (4) SPREADERS
STAND PARTS
• ADJUSTABLE WRENCH (not included)
• STANDARD SCREW DRIVER (not included)
• DRILL (not included)
• ALLEN WRENCH (included)
• SQUARE HEAD DRILL BIT (included)
SUGGESTED TOOLS
(4) LOCK NUTS(8) FLAT WASHERS
(16) 3” FLATHEAD SCREWS(4) 2” BOLTS
Hardware Pack Weight : 7.2 oz.
HARDWARE PACK
3”3”
SCREWSCREW
SPREADER BAR
FASCIA PLATE
(1) SQUARE HEAD DRILL BIT (1) ALLEN WRENCH

Congratulations on purchasing this Durawood Counter Height/Bar Height Table. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-758-0641.
RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking, peeling,
chipping, insect infestation or other damage should ever occur, The Hammock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any
returned product, along with a Return Authorization Number from Hammock Source customer service; call toll-free at 252-758-0641.
CONTRACTOR WARRANTY - CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above.
MAINTENANCE - Thoroughly inspect product before each use. Periodically check bolts after assembly and re-tighten when necessary.
ASSEMBLY
STEP 2.Align holes in Table Legs with holes in Table Top and use (4) 2” bolts, (8) washers and (4) lock nuts to attach leg structure to table top.
Make sure to use two washers per bolt, one for the bolt head and one for the locknut. Tighten all bolts.
Refer to detailed image for hardware order.
NOTE: Do not tighten anything until all bolts are installed.
Parts hidden for visual purposes
#6154
BOLT
WASHER
LOCK
NUT
WASHERWASHER
BOLTBOLT
LOCK NUTLOCK NUT