Hatteras Hammocks SUNRISE ADIRONDACK CHAIR User manual

ADIRONDACK CHAIR
INSTRUCTIONS
• CHAIR BACK
• CHAIR SEAT
• LEFT CHAIR ARM
• RIGHT CHAIR ARM
• SPREADER BAR
• RUBBER MALLET
• PHILLIPS HEAD SCREWDRIVER
• DRILL
Hardware Pack Weight: 5.8 oz.
(8) BARREL NUTS
(8) 1.5” BARREL BOLTS
(2) 2” SCREWS
(2) PEGS
(1) ALLEN WRENCH
(1) SQUARE-HEAD BIT
Sunrise chair back dierent than shown.
HARDWARE PACK
CHAIR PARTS
SUGGESTED TOOLS
STEP 1. Use (4) 1.5” barrel bolts to attach chair back to chair
seat. Keep all barrel bolts loose until Step 3.
ASSEMBLY
CHAIR
BACK
CHAIR
SEAT
BARRELBARREL
NUTNUT
1.5”1.5”
BARRELBARREL
BOLTBOLT

Congratulations on purchasing this Durawood Sunrise/Essentials Adirondack Chair. QUESTIONS REGARDING THIS PRODUCT? Call our customer service team, 252-758-0641.
RESIDENTIAL WARRANTY - This quality product includes a FULL LIFETIME WARRANTY for RESIDENTIAL CUSTOMERS. In the unlikely event any splintering, rotting, cracking, peeling,
chipping, insect infestation or other damage should ever occur, The Hammock Source will replace this furniture, at no charge to you. Note that an original sales receipt must accompany any
returned product, along with a Return Authorization Number from Hammock Source customer service; call toll-free at 252-758-0641.
CONTRACTOR WARRANTY - CONTRACTORS receive a FULL 7-YEAR WARRANTY. Follow the same steps outlined above.
ASSEMBLY
STEP 3. Use (2) 1.5” barrel bolts and (2) barrel nuts to attach
right & left chair arm to chair back. Tighten all bolts.
STEP 2. Use (2) 1.5” barrel bolts, (2) barrel nuts, (2) pegs and (2) 2”
screws to attach right & left chair arm to chair seat and spreader bar.
Keep all barrel bolts loose until Step 3.
RIGHT
CHAIR
ARM
LEFT
CHAIR
ARM
1.5”
BARREL
BOLT
SPREADER BAR
PEG
BARRELBARREL
NUTNUT
2” SCREW
1.5”
BARREL
BOLT
BARREL
NUT
#5212 & #6013 / 0217