Hauppauge mySmarthome User manual

Step 4 WEB Adding mySmarthome devices or any other Z-Wave device
The final step in the initial setup is to
wirelessly connect mySmarthome devices
to your mySmarthome Controller. During
this process, we recommend you position
mySmarthome devices within a few meters
of the mySmarthome Controller. Once the
device has been added, you can move it to
its final position in your home.
Note: these same steps can be used to add any
of the hundreds of third party Z-Wave devices.
Adding devices is done in two steps: Removing
or Exclusion and then Joining or Inclusion.
In this example we will use the mySmarthome
Power Plug. Plug the mySmarthome Power Plug
into a power socket.
On a PC or Mac:
Once you have logged into your mySmarthome
account, in the mySmarthome browser, click
ADD NEW DEVICE (A).
On your smartphone:
Log into the mySmarthome App, and open the
Main Menu and choose “Add device” .
On both types of devices:
1. In the next window, select Z-WAVE.
2. Removing/Exclusion:
Once you select Z-Wave, a countdown will
start (B). During this countdown, press the
button on the front of the mySmarthome plug
three times in quick succession.
Step 3 WEB Registering your mySmarthome Controller
To register your mySmarthome Controller, you will need the Serial Number from the back
of you mySmarthome Controller (A).
On your smartphone:
1. Log into the mySmarthome App, and open
the Main Menu .
2. Select + Register mySmarthome (B) and
enter your mySmarthome serial number. Click
Save.
On a PC or Mac:
1. Log into your mySmarthome account. The
first time you log onto mySmarthome, you will
see the Add new box (C).
2. Enter your mySmarthome Serial Number and
click Save.
Your mySmarthome Controller will now be
assigned to your account.
Step 2 WEB Signing up for the mySmarthome cloud service on your
Windows PC or Mac computer
Next, setup a User account on our mySmarthome Cloud Service.
1. Open your Internet browser (Chrome, Firefox,
Internet Explorer, Safari) and in the address
field type:
www.hauppauge.com/mysmarthome
2. Start the Registration by selecting the
“Sign up” button (A).
3. Enter your e-mail address and choose a
password to sign up an account. Confirm
them by selecting Save.
4. After a few moments, you will receive an
email from the mySmarthome Cloud service
which will require you to verify your details.
Please click Verify.
5. You can now login to the mySmarthome
service using the email and password you
used for the registration. The URL is:
www.hauppauge.com/mysmarthome
6. Once you are logged in, you will be at the
mySmarthome Main Menu (B).
There are three parts of the Main menu (B):
• the left side is the Device manager (C)
• the center part lists Function Categories (D)
• the right side is where you create Rules (E)
Step 2 Signing up for the mySmarthome cloud service using your
smartphone or tablet
Next, setup a User account on our mySmarthome Cloud Service.
1. Start the mySmarthome App (A) on your
Smartphone or Tablet.
2. Start the Registration by selecting the
“Register“ button at the bottom right.
3. Enter your e-mail address and choose a
password to sign up for a mySmarthome
account. Confirm them by selecting
“Register“ (B).
4. After a few moments, you will receive an
email from mySmarthome Cloud service
which will require you to verify your details.
Please click “verify”.
5. You can now login to the mySmarthome App
using the email and password you used for
the registration (C).
Step 1 WEB Connecting mySmarthome Controller to your
Internet router
In the first step you will need to connect the mySmarthome Controller to your
Internet router.
1. Open the back plate (mount) on the back
of the mySmarthome Controller and make
a note of the Serial Number (A) of your
mySmarthome Controller.
2. Run the supplied network cable (B) through
the back plate and plug it into the RJ45
Network port of the mySmarthome Controller
(C). Connect the other end of the cable to
your router (D).
3. Connect the supplied power adapter (E) to
the mySmarthome Controller and add it to
your power socket.
The status LED on the left side of the
mySmarthome Controller will turn green to
indicate the unit is on.
During startup, your mySmarthome controller
will start flashing a white light quickly. This
indicates that your mySmarthome is connecting
to the cloud service. Once online the white light
will gradually glow. mySmarthome is now online
and is ready for use.
What is mySmarthome?
Hauppauge mySmarthome allows you to monitor
and control your home using the mySmarthome
controller and mySmarthome devices (or
hundreds of other Z-Wave devices).
mySmarthome connects to your home Internet
router and uses our cloud based alert system to
let you know when something happens in your
home.
mySmarthome is reliable and secure, and can
save energy.
What is in the mySmarthome
Starter Kit?
• mySmarthome Controller plus
• RJ45 network cable
• Power Adapter
• Serial number
• 2 x mySmarthome Power Plug
• mySmarthome 4-in-1 Sensor (motion,
temperature, light level, door/window open
and close sensor)
What you will need to install
mySmarthome?
1. Access to your home Internet router (wired
access), connected to the Internet
2. An e-mail address (for setting up your
mySmarthome cloud service in Step 2)
3. A Windows PC or Mac, or Apple IOS or
Android mobile device
4. If you have an Apple or Android device,
download the Hauppauge mySmarthome
app from the Apple App Store or Google
Play Store
Getting started with your Hauppauge
mySmarthome only requires four
steps:
1. Connecting mySmarthome controller to your
router
2. Signing up for the mySmarthome cloud
service
3. Registering your mySmarthome controller
4. Adding mySmarthome devices such as the
provided power plugs, the 4-in-1 sensor plus
any other optional devices
mySmarthome
Control Starter Kit
Z-Wave Power
plugs (2 pcs)
mySmarthome
controller Z-Wave
4 in 1 Sensor
A B C
B
C
BBA
CDE
A
A
654
1 2 3

8. Drag and drop the 4-in-1 Motion sensor to
the square in the SENSOR box in the rule
(see C). It now turns to 4-in-1 MOTION
SENSOR. If you click on MOTION in the
4-in-1 MOTION SENSOR box, you will have
a drop down list of all the types of things
you can do with a motion sensor: Motion,
No motion or Any. For this example, select
MOTION.
9. Now, lets tell one of the power plugs in our
house to turn on when motion is detected.
Under Devices, click ACTUATOR. Drag
WALL PLUG 1 into the box in ACTION. The
Action name changes to WALL PLUG 1.
10. Click SELECT ACTION and set to ON. We
have now setup the Wall Plug to turn on when
the 4-in-1 sensor detects motion.
11. Now, lets configure the e-mail alert. In SEND
MESSAGE, click CONFIGURE. You will see
the Configure message dialog box (D). In
Send to, click New contact and then type
the e-mail address of the person who should
get the e-mail alert. The click Save. Give
the message a Subject (Motion!!) and then
click Save.
12. Your rule has now been created! Click
Save on the puzzle and then Synchronize
(synchronize is the icon just underneath the
Hauppauge logo on Rule Creator menu).
13. Now test your rule by making some motion in
front of your 4-in-1 sensor and making sure
the light goes on and the e-mail alert is sent.
Since rules can be pretty involved, we have put
together several resources to help you make
rules. We have created both videos and a
webpage to help you make rules. You can start
here to find out more information on creating
rules: www.hauppauge.com/mysmarthomerules
Step 7 (Optional) WEB Creating Rules and Sending Alerts
Rules allow you to create a sequence of events when something happens in the
mySmarthome system. For example, you could create the following rule: “WHEN the motion
sensor detects motion, THEN turn on the mySmarthome plug in the living room and send me an
e-mail message.”
You can also create a rule to send you an e-mail
alert when, for example, a door or window is
opened.
In this example, we will turn on a light and send
an e-mail alert when motion is detected.
1. Log in to your mySmarthome account. The
Rule Creator menu and all the elements
required for the creation of rules are on the
right side of the web application.
2. To create this rule, first click Puzzle.
3. Click the CONTROL tab and drag the green
WHEN to the middle of your screen (A).
4. Click the SENSOR tab and drag SENSOR
to the top of WHEN (see A).
5. Click the ACTION tab and drag the action
marked ACTION to the bottom of WHEN
(see A).
6. Now lets add an alert. In the Action tab,
drag and drop SEND MESSAGE to just
below ACTION (see A).
7. Now you have the basic rule set up. Now you
need to tell the Rule Creator which sensor
to look for. So, lets add a sensor. Click on
Devices and then SENSOR. You will see a
list of the sensors which are installed in your
mySmarthome system (B).
Step 6 (Optional) WEB Create Scenes
Scenes can be used to control mySmarthome devices with one click. For example, you
can create a Scene where with one click on the mySmarthome app, several lights can be
turned on and dimmed to a certain setting.
Here is an example of a simple scene:
1. In the Main Menu, select Scenes .
2. Click CREATE NEW. You will now see an
overview of all available devices in your
mySmarthome system.
3. In the field NAME, enter a name for the
scene. In this example, we use LV.
4. For each device you want to use in this
scene, click on INCLUDE. The text changes
to EXCLUDE which you can click if you
change your mind and decide you want to
exclude the device.
5. Set the desired state for each device (for
example ON) and save the scene by clicking
on SAVE.
6. Click RUN in the scenes menu to perform the
scene.
Step 5 (Optional) WEB Naming your mySmarthome accessories
You can add names to your mySmarthome accessories. This allow you to know that, for
example, a power switch is located in the kitchen.
1. In the Main Menu, select the Category (B)
of the device you want to setup. A selection
of available devices in the chosen Category
will be displayed in the left menu (A).
2. For the device you want to rename, click
on the Gear icon
For the device you want to rename, click
to open the Device
manager menu ( C ).
3. In the Device manager menu, under Name,
you can change the name. Under Room you
can assign a room (e.g. living room) for this
device.
4. Confirm your changes by selecting Save.
3. This will reset the mySmarthome Power Plug.
You should see Device found (C) and the
Removing Device count down stop and the
Searching for devices will then start (D).
4. Joining:
Once the Searching for devices count
down starts (D), press the button on the
front of the mySmarthome Power Plug three
times in quick succession.
When the mySmarthome Controller detects
the three button click, the Searching for
devices count down will stop.
Your device is now added to your
mySmarthome system and a
Congratulations will pop up on your
screen (E).
Special note for the mySmarthome 4-in-1
Sensor: First activate the battery by pulling out
the battery flap on the back. The ‘tamper’ switch
for activating the inclusion / exclusion mode is on
the back. Click the tamper button three times in
quick succession.
General Information: If your devices are too far
away from the mySmarthome Controller, you will
not be able to add the devices.
General Information: Other Z-Wave devices can
be added to mySmarthome. Please refer to the
manual which comes with your Z-Wave device
more information on adding the device.
QI-MYSM-CSK-V1.0-ENG
EDC
A
A CB
BC D
121110
7 8 9