HAVEN LIGHTING Q Series User manual

havenlighting.com RevQ
1
Q SERIES – FULL COLOR DUOLED CONTROLLER
OPERATIONS MANUAL
Storage and Mounting
What’s in the Box?
1 x Q Series – Full Color Duo LED Controller w/ Connectors
2 x Wood Mounting Screws
2 x Dry Wall Anchors & Screws
2 x Wireless Wall Switch w/ Screws*
2 x Double Sided Tape (for non-screw mounting option)
1 x Power Supply
* Wireless Wall Switch NOT included with WiFi version. see attached Wireless Wall Switch guide.
STEP 1: Connect Antenna STEP 2: Connect wires to connectors
Note: DO NOT CONNECT
TO POWER UNTIL STEP 5
STEP 3: Plug in connectors
STEP 5: Connect to power
(Dry wall mounting optional with
included anchors and screws or
double-sided tape)
STEP 4: Mount controller
COM RED GRN BLU
This lighting controller must be mounted in a clean and dry environment with good ventilation. Do not block or cover the
vents in the enclosure. Avoid mounting the controller within a metal enclosure. If this is a requirement, we highly
recommend that your purchase an antenna extender cable and mount the antenna outside the metal enclosure.

Wiring
COM RED GRN BLU
Lighting Connectors
Light A Control
(5 Amps)
Feedback
Pairing Button
Fuse 2
Fuse 1
24 VDC Power
Light B Control
(5 Amps)
Antenna
Note: Fuse lights should
be on for proper operation.
Full Color LEDController
Voltage: 10 – 26 V DC
Current: Total Current: 10 Amps
Light Area A: 5 Amps
Light Area B: 5 Amps
Configured to work with Common Cathode LED
configurations (connections to light should be
Negative, R, G, B)
120 V AC to 24 V DC Power Supply Included
Technical Information
6 1
2
"
7 1
2
"
8"
3 7
8
"
4 3
8
"
1"
Dimming Capability: 15 Brightness Levels
White Color Options: 10 White Temperatures
We highly recommend you use our Full Color Wire for any installation where the strips are not directly connected to the controller.
The wire we use is 14 AWG stranded wire that is in wall rated and direct burial rated.
Our LED lights are bright and run at a higher voltage to reduce the amount of current to power them. However, voltage drop
management due to this power transmission is still very important when wiring your system.
Color Information
Wiring Configurations
havenlighting.com RevQ
2