Coaster Stillwood 223281Q User manual

223281Q (B1-B3)
Queen Bed
PAGE 1 OF 5 COASTERFURNITURE.COM
ASSEMBLY INSTRUCTIONS
COASTER FINE FURNITURE
Fine Furniture for every stage of life
REVISION 0 : 01/08/2020

ITEM:223281Q (B1-B3)
PARTS IDENTIFICATION
AHEADBOARD PANEL 1PC
B1PC
C
COASTERFURNITURE.COM
B1 ( BOX 1 )
1PC
EFOOTBOARD 1PC
FBED SLAT 4PCS
B3 ( BOX 3 )
HBED RAIL 2PCS
HB
223281Q (B1)
FROM BOX 1
HEADBOARD COMPLETE
1PC
E
223281Q (B2)
FROM BOX 2
FOOTBOARD
1PC
GBED SLAT SUPPORT WITH LEVELER 4PCS
PAGE 2 OF 5
ASSEMBLY INSTRUCTIONS
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
DHEADBOARD BOTTOM RAIL 1PC
B2 ( BOX 2 )
LEFT HEADBOARD LEG
(WITH "L" LABEL)
RIGHT HEADBOARD LEG
(WITH "R" LABEL)
25 MINUTES
ASSEMBLY TIME

Phillips head screw driver is required in the assembly process; however, manufacturer does not provide this item.
NOTE:
Z-B1 (BOX 1) - HARDWARE PACK IS LOCATED IN 223281Q (B1)
11PC
SMALL ALLEN WRENCH
(M4 x 110mm - BLK)
2
8PCS
SHORT BOLT
(M8 x 20mm - BLK)
3
2PCS
LONG BOLT
(M6 x 60mm - BLK)
4
18PCS
LOCK WASHER
(5/16" - BLK)
5
10PCS
SMALL FLAT WASHER
(5/16" x 18 x 1.2 - BLK)
6
4PCS
WOOD DOWEL
(M8 x 30mm - BLK)
7
8PCS
FLAT HEAD SCREW
(#8 x 28mm - BLK)
HARDWARE IDENTIFICATION
COASTERFURNITURE.COM
PAGE 3 OF 5
ITEM:223281Q (B1-B3)
ASSEMBLY TIPS:
WARNING!
1. Don't attempt to repair or modify parts that are broken or defective. Please contact the store
immediately.
2. This product is for home use only and not intended for commercial establishments.
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior to start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
1PC
BIG ALLEN WRENCH
(M5 x 60mm - SR)
8PCS
BIG FLAT WASHER
(5/16" x 23 x 1.2 - BLK)
8PCS
MEDIUM BOLT
(M6 x 40mm - BLK)
8
9
10
ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS
STEP 2
COASTERFURNITURE.COM
PAGE 4 OF 5
STEP 1
ITEM:223281Q (B1-B3)
BACK VIEW
B
C
D
D
9
B/C
A
B
C
D1
46
7
7651
A
B/C

STEP 4
COASTERFURNITURE.COM
PAGE 5 OF 5
ASSEMBLY INSTRUCTIONS
STEP 3
ITEM:223281Q (B1-B3)
STEP 5
COMPLETE
HB
H
H
E
8
6
3
2
H
HB
H
H
E
F
G
10
4.1
4.2

64.5"
95.5"
55.1"
INNER: 61" x 81.1"
61"
16.3"
9"
65.2"
25.8"
COASTERFURNITURE.COM
NOTE : DIMENSION TOLERANCE ±5%
ITEM:223281Q (B1-B3)
8"
3.9"
58.5"