Dunelm Lynton 5 Drawer Chest 30463320 User manual

INSERT LINE DRAWING HERE
Lynton 5 Drawer Chest
L84 x W42 x H100.5 cm
White

Thank you for purchasing your new piece of furniture from Dunelm.
We put a lot of effort in the design and construction of our products to ensure they set the standard for
quality, durability and ease of assembly.
If for any reason you feel we haven’ t lived up to the high standards we set ourselves, please don’ t
hesitate in contacting us on 03451 656565 where our team will be very keen to understand what has
gone wrong and, more importantly, put it right.
The Next Step...
Before you begin, we advise that you check that you have everything you need to get started.
DEAR CUSTOMER
TOP TIP
Lay each panel down on a clean and level area, ideally in the room of intended use, ensuring there is
enough room to manoeuvre around the item. It is recommended that two people assemble this
product together.
TOP TIP
component, to make things easier when you are putting it all together.
Safety and Care Advice
IMPORTANT -
Please take the time to read and understand these instructions before assembling your furniture.
Please keep these instructions for future reference.
Keep children and animals away from the assembly area.
This furniture contains small parts that could cause choking if swallowed.
Keep all plastic wrapping materials away from babies and children to avoid danger of suffocation.
Ensure that all packaging is disposed of carefully and responsibly.
Two people may be required for the assembly of this product.
Once items are part or fully assembled they are not returnable unless faulty.
This item is not for outdoor use – unless stated otherwise.
to the wall, to prevent a child from accidentally pulling furniture over.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent
person. No liability will be accepted for damage or injury caused by incorrectly installed or
assembled furniture.
1
There is no need to feel daunted by the number of parts and fittings in front of you,we have
compiled this straight forward, step-by-step guide to make sure that assembling your furniture is as
easy as 1, 2, 3.
The full list of furniture parts,fixtures and fittings,as well as the tools you ill need for assembly
can be found on page 2,3,4,5 and 6 of this manual.

Panel - exploded view
Panels - plan view
2
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
6
6
6
23
10
12
15
16 17
18
19
20
15
16
22
x2
x2
21
1
Left side panelTop panel
1 2
Parts & fittings for the Lynton 5 Drawer Chest (30463320)

Panels - plan view
3
99
Parts & fittings for the Lynton 5 Drawer Chest (30463320)
Right side panel Middle crossing bar
Back upper crossing bar Crossing bar x 4
Crossing bar Back lower crossing bar
9Upper drawer leftt panel x 3 Upper drawer back panel x 2
9
78
9
34
56
10

Panels - plan view
4
9
Parts & fittings for the Lynton 5 Drawer Chest (30463320)
Middle drawer bottom panel x 3
13
Upperr drawer bottom panel
Upper drawer front panel x 3 12
11
15
Upper drawer right panel x 3
12
13
Middle drawer back panel
14
Middle drawer bottom support x 3
13
16
Middle drawer front panel
13
17
Lower drawer back panel x 3
13
18

Panels - plan view
5
9
Parts & fittings for the Lynton 5 Drawer Chest (30463320)
Right back panel
13
Lower drawer left panel x 2
Lower drawer front panel x 2 12
19
23
Lower drawer right panel x 2
20
21
Left back panel
22
13

Fittings
Tools Required
Before you start
Check the pack and make sure you have all the parts listed above.
If not, contact the helpline on 03451 656565 who will be able to help you.
When you are ready and sure that you have the right tools to hand, you will need plenty of space and a clean
dry area for assembly.
6
ABC D E
F G H IJ
K
Phillips screwdriver (medium) Flatblade scresdriver(medium)
Metal cam x 45 30mm Wooden
dowel x 22
Ø5x40mm Screw
x 26
Metal cam pin x 45
21mm Screw x 8310mm Slide x 4 Handle x 8
Parts & fittings for the Lynton Bedside Table (30463318)
Anti-topple device
x 2
Ø3.5x14mm Screw
x 64
Ø3x16mm Screw
x 14
L M
Sticker x 1
Back panel clip x 1 232mm Slide x 6

7
Ready?
Follow this step-by-step guide
G
G1
G2
1
G1
E
G1
G1
L1
L1
G1
G1
L1
G1
3
2
L1
LL2
L1
L1
E x 24 G1 x 4 L x 4

I
I
8
2
LL2
L1
L1
L1 L1
44
E
L1
E x 6 L1 x 2
L1

I
9
3
B
13
17 21
x2
x2
1
2
3
B
B
B
B
B
B
C
C
B x 45 C x 4