Mainstays MS98-020-082-01 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2018-06-06 Rev. 0001-A Factory: DOSHFU
End Table
Stock # MS98-020-082-01
# MS98-020-082-02
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to
the store where it was purchased. Please call our customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE OF PURCHASE: / /

2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: End Table
MODEL # MS98-020-082-01/-02
MADE IN CHINA
SPECIAL NOTE
Please read the instruction sheets completely before assembly. Examine all packaging
material before discarding carton. Remove any remaining staples from the carton
before discarding. Remove all parts from carton and separate into groups as indicated
on part list. Please ensure all parts are included prior to assembly. Use of power tools
to complete assembly is not recommended.
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S
MAXIMUM LOAD 50 lb. (22.7 kg)
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS
INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

3
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are
present before beginning assembly.
A- Table Top (Qty. 1) B- Side Frame (Qty. 2)
C- Top Stretcher (Qty. 2) D- Bottom Stretcher (Qty. 2)
(1) 1/4" x 5/8” Bolt (Qty. 8+1 extra) (2) Lock Washer (Qty. 8+1 extra)
(3) Flat Washer (Qty. 8+1 extra) (4) M4 x 32 mm Screw (Qty. 8+1 extra)
(5) Floor Leveler (Qty. 4) Hex Wrench (Qty. 1)
Tools required: Hex wrench (provided) and Phillips screwdriver (not provided).

4
Assembly Instructions
1. Unpack the units and confirm that you have all hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Attach the Stretchers (C and D) between the Side Frames (B) with eight 5/8” Bolts (1) and eight
Washers (2 and 3) as shown.
1
2
3
1
2
3
B
B
D
D
C
C
BB
D
D
C
C
Lock Washer
(8 used in this step)
②
Flat Washer
(8 used in this step)
③
1/4" x 5/8” Bolt
(8 used in this step)
①

5
Assembly Instructions
3. Attach the previous assembly to the Table Top (A) with eight 32 mm Screws (4).
M4 x 32 mm Screw
(8 used in this step)
④
BB
C
C
A
4