Haworth Zody User manual

1Pneumatic Height Adjustment
Pneumatic height adjustment is used to adjust the
seat to fit dierent user heights. Pull the lever up
and lift the body out of the chair to raise the seat. To
lower the seat, remain seated and pull the lever up.
2Seat Depth Adjustment
Seat depth adjustment moves the seat pan to
accommodate dierent leg lengths. Pull out and up
on the lever at a 45 degree angle, and slide the seat
pan front to back.
3Tilt Tension Control
Tilt tension adjusts the force necessary for a user
to recline in the chair.Turn the crank forward
(clockwise) to tighten the tension and backward
(counter-clockwise) to loosen the tension. Once
the tension has reached its maximum in either
direction, do not force the crank further.
。
Page: 1 of 3
5"
21"
16"
5”(127mm)
16”(406mm)
21”(533mm)
1
45°
3"(76mm)
Front View
Detail(s)
Seat Depth
Adjustment
(-)
(+)
(+) Tension (-)
Side View Detail
Zody®
User Guide

4Back Stop
Back stop allows users the choice of selecting an
upright position or limiting the amount of recline.
(1) Recline to the desired stopping position.
(2) Push down on the lever to activate the back stop.
(3) Pull up on the lever to release the back stop.
5Forward Tilt
Forward tilt allows users to sit forward in the chair
during task-intensive work.
(1) To activate, push down on the forward tilt lever.
(2) Recline.
(3) Lean forward; pull up and recline to release.
6PAL® Back System & Lumbar
Adjustment
PAL®
Lumbar height adjustment allows the user to position the
lumbar pad in the lumbar curve. Pull up on the handles to
raise the lumbar pad; push down to lower it. Lumbar
support helps maintain the lumbar curvature (lordosis) in
the spine of the lower back when the user is seated. Rotate
the handles up to increase the amount of support and
down to decrease the amount of support. Each handle can
be rotated independently.
Page: 2 of 3
1
3
2
Release Back Stop
Activate
1
2
3
Release Back Stop
Activate
PAL® Back System:
*Optional lumbar support with
patended asymmetrical adjustment,
providing low-back support.
*Passive pelvic support,
Provides low-back support.
Zody®
User Guide

7Arms
(1) Arm height adjustment raises and lowers the arms to
keep the users shoulder in a neutral posture. To change
the height of the armrest, pull up on the lever and slide
the armrest up or down.
(2) Armrest side-to-side adjustment accommodates users
with various shoulder width. Grasp the armrest cap and
slide it side-to-side as needed.
(3) Armrest front-to-back adjustment allows users to get
closer to their work surface while maintaining eective use
of the backrest. Grasp the armrest and slide it forward or
3"(76mm) backward as needed.
(4) Armrest pivot allows the user to have proper support
of the forearm when mousing or keying.To change the
angle of the armrest, grasp the armrest cap and rotate
the front of the armrest toward or away from the body.
8Headrest Adjustment
Headrest provide user thoracic support with
2.5”(64mm) adjustment range. Grasp the headrest
with both hands, pull up or push down to the
position preferred, there is 7 position stop which
cover wide range of user needs.
Page: 3 of 3
2
3
4
Zodey-General Specs & Adjustability-02
Seat Depth
3"
Upper Back Torsional Movement
PAL Back System
1
2
Zodey-General Specs & Adjustability-03
Arm Height Tilt with Back Stop (6 Positions)
Forward Tilt Back Stop/Forward Tilt
1
4”(102mm)
Zody®
User Guide