Hay BOWLER User manual

– INSTRUCTION MANUAL –
DESIGN BY SHANE SCHNECK
BOWLER

 PARTS 


A Tray x1
 PARTS 

B Tube x1

C Granite base x1  D Spring washer x1  E Washer x1  F Plastic washer x1

G Screw x1  H Screw x1  I Allen key
Large x1

J Allen key
Small x1

1.
Insert the tube  B into the granite base  C . Make sure the small hole on top of
the tube is facing the long side of the granite base. Insert the screw  H , spring
washer  D and washer  E from the bottom, and secure them with the large Allen
key  I . Wait until the next step before fully tightening the screw.

2.
To fully fasten the screw, turn the base upside down in your lap to get a good grip, and
then tighten the screw completely.

3.
Mount the plastic washer  F to the pin on the bottom of the tray  A .

4.
Insert the tray’s pin A into the tube  B . Secure the connection by fastening the screw

G with the small Allen key  J . Make sure the long side of the tray is facing the long
part of the base. Re-tighten both bottom and top screws after the table has been fully
assembled.

5.
Done!

 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on Bowler by scanning the QR code
You can also find the same information here
hay.dk/downloads

22122021
Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
www.hay.com