Furniture of America CM7923Q User manual

MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended
EASY DIFFICULT
1 / 9
C M7923Q/F
VERSION # 20-10-16
3- People

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ XXXXXXX9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ XXXXXXX9

4 / XXXXXXX9

#61pc
BED
pc
Footboard
2 pcs #4 2pcs
#5 2pcs
Side Rail Back Rail Headboard Legs
Bed Slat Support Legs Center Support
Bottom Rail
Headboard
#A 8pcs
Bolt 5/16" x 1" Flat Washer 5/16" Allen Key M4
#B 8pcs #C 1pc #D 8pcs #E 16pcs
Screw M4 x 30mm Bolt 1/4"x1-5/8"
Flat Washer 1/4"
#F16pcs #G2pcs #H2pcs#I8pcs #J4pcs
Bolt 1/4"x3-7/8" Barrel Nut 1/4" Wood Dowel
M10 x 40mm Bolt 1/4"x2-3/8"
5 / 9
CM7923Q/F
#7 2set (12pcs) #8 4pcs #92pcs

Exploded View
6 / 9
#1
#2
#3
#7
#8
#4
#5
#9
#6

Headboard
Footboard
Back Rail
Headboard Legs
Bottom Rail
Bed Slat
Support Legs
Center Support
#A 8pcs
#B 8pcs
#C 1pc
#E 16pcs
#F 16pcs
#G 2pcs
#H 2pcs
#I 8pcs
#D 8pcs
#J 4pcs
#1
#2
#4
#5
#6
#3
#7
#8
#9
7 / 9
Side Rail
CM7923Q/F is packed in 2 cases
CM7923Q/F
-HB-FB
CM7923Q/F
-R

1
2
Part
ASSEMBLY INSTRUCTIONS
6
Hardware Gx 2pcs
Part
Hardware Hx 2pcs
Hardware Ix 4pcs
Part 1
Hardware Ex 16pcs
Hardware Fx 16pcs
Hardware Ix 4pcs
8 / 9
Part 4
5x2pcs
x2pcs
Align HB legs (#5) to the bottom rail
(#6), then secure by using bolts (#G)
onto barrel nuts (#H).
Insert dowels (#I) to HB legs (#5),
then align HB legs (#5) to headboard
(#1). Align back rails (#4) to HB legs
(#5) and headboard (#1). Secure by
using bolts (#E) with washers (#F).

ASSEMBLY INSTRUCTIONS
3
Part 3
Hardware Ax 8pcs
Part 2x1pc
Hardware Bx 8pcs
x2pcs
Part 8
Hardware Dx8pcs
Hardware x4pcs
x4pcs
J
Part 9x2pcs
9 / 9
Part 7x2set
4
Align side rails (#3) to the headboard
(#1) and footboard (#2), then secure by
using bolts (#A) with washers (#B).
Align slats (#7) to the side rails (#3),
then secure by using screws (#D).
Align slat support to slats (#7), then secure
by using bolts (#J) onto support legs (#8).