Hay New Order Trolley A User manual

– INSTRUCTION MANUAL –
DESIGN BY STEFAN DIEZ
TROLLEY A & TROLLEY B
NEW ORDER

– INTRODUCTION –
Developed in collaboration with HAY, Stefan Diez’s
New Order is a modular shelving and table system
designed to fit the ever-changing boundaries of
contemporary workspace and living environments.
The simple open-grid construction serves as a flexible
and functional framework, enabling the user to create
customised open or closed storage solutions with
optional drawers, doors and panels.
New Order’s multifunctional tables are suitable as
dining tables or meeting tables, used alone in a
private setting or integrated with the shelving system
and other space management components to make
personalised workspace solutions. Diverse colour
and material options extend the design possibilities,
offering a versatile and aesthetic system.

1.
All drawers on the trolleys are opened with a “push to open” system.
Make sure you always unlock the lock before trying to open the drawers.
The front wheels can be locked in place, as shown in the illustration below.
– INSTRUCTION MANUAL –

2.
Please note that the trolley has a lock to prevent tipping, which only
allows you to open one drawer at a time.

6
CAUTION
With a little care you can prolong the life
of your furniture. Follow the instructions for
the materials of your specific product to
make sure that it stays in the best shape
for as long as possible.
The information below is only intended as
a general guideline. For more information
on how to remove specific stains, please
enquire where you bought the furniture.
/Always remove stains quickly before
they can do any permanent damage to
the furniture.
/Avoid placing the furniture in direct
sunlight or near a heat source to reduce
changes. As wood is a natural material,
it will change in colour and will patinate
over time.
/When you move the furniture, make
sure you lift it rather than pulling or
pushing it to avoid damaging the floor,
legs and mountings.
/Tighten up the screws after one to two
months’ use and whenever required.
/Be careful not to scratch or damage
the surface with sharp objects.
/Avoid partially covering the surface, for
example with tablecloths or place mats,
as colour variances may appear.
ALUMINIUM
/Wipe with a clean cloth wrung in water
or in a solution of water and a neutral
detergent. Remove soap residue
immediately using a clean, dry cloth.
/Avoid using scouring cream or
scouring pads, as they may scratch
the surface.
POWDER COATED STEEL
/Wipe with a clean cloth wrung in water
or in a solution of water and a neutral
detergent. Remove soap residue
immediately using a clean, dry cloth.
/Avoid using scouring cream or
scouring pads, as they may scratch
the surface.
/White spirit (mineral spirit) can be
used to carefully remove stains from
chromed surfaces.
/Do not use solvents as they may have
an adverse effect on the coating.
/Never use acetic acid or citric acid.
– CARE AND MAINTENANCE –

– PARTS –
Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
15/09/2020
ITEM NO. 850004