Hay WOODY - HIGH User manual
– INSTRUCTION MANUAL –
DESIGN BY HAY
WOODY
INSTRUCTION MANUAL
COLUMN LOW
PARTS
E
Screw x36
G
Allen key x1
A
Upright x4
C
Ledger x6
B
Ledger x6
D
Shelf x3
F
Cap x36
NOTICE
Top distance
37,5 mm
NOTICE
Bottom distance
52,5 mm
1.
Place the
B
parts on the
A
parts and tighten the screw gently.
A
A
A
A
B
B
B
B
NOTICE
Please wait to fully tighten
the screws until step 3.
A
2.
Place the
C parts on top of the
B parts and gently tighten the screw.
37,5mm
62,5mm
C
C
C
C
C
C
C
NOTICE
Please make sure to place all
C parts in the same direction
3.
Place the screws to connect the
A part and
C part. Tighten the screw gently. When
all screws are placed and fully tightened, place the
F on the screw heads.
NOTICE
Please make sure to tighten all screws
fully before placing the
F part
4.
Place the
D parts on top of the
C parts.
5.
Done!
INSTRUCTION MANUAL
COLUMN HIGH
PARTS
E
Screw x72
G
Allen key x1
A
Upright x4
C
Ledger x12
B
Ledger x12
D
Shelf x6
F
Cap x72
NOTICE
Top distance
37,5 mm
NOTICE
Bottom distance
52,5 mm
1.
Place the
B
parts on the
A
parts and tighten the screw gently.
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
NOTICE
Please wait to fully tighten
the screws until step 3.
2.
Place the
C parts on top of the
B parts and gently tighten the screw.
2 persons are recommended to complete this step.
37,5mm
62,5mm
C
C
C
C
C
C
C
C
C
C
C
C
C
NOTICE
Please make sure to place all
C parts in the same direction
NOTICE
Please make sure to tighten all screws
fully before placing the
F part
3.
Place the screw to connect the
A part and
C part. Tighten the screw gently.
When all screws are placed and fully tightened, place the
F on the screw heads.
4.
Place the
D parts on top of the
C parts.
5.
Done!
INSTRUCTION MANUAL
LOW
PARTS
E
Screw x72
G
Allen key x1
A
Upright x8
C
Ledger x6
B
Ledger x12
D
Shelf x9
F
Cap x72
NOTICE
Bottom distance
52,5 mm
NOTICE
Top distance
37,5 mm
1.
Place the
B
parts on the
A
parts and tighten the screw gently.
A
NOTICE
Please wait to fully tighten
the screws until step 3.
2.
Place the
C parts on top of the
B parts and gently tighten the screw.
2 persons are recommended to complete this step.
37,5mm
62,5mm
NOTICE
Please make sure to place all
C parts in the same direction
Table of contents
Other Hay Indoor Furnishing manuals
