Belair W-03R User manual

W-03R
1
DISCLAIMER
• Two people are recommended for the assembly of this product.
• Use hardware provided and tools recommended to avoid any product faults.
• Always assemble product on a clean soft surface to avoid scratching.
PARTS INCLUDED
HARDWARE INCLUDED
TOOLS REQUIRED
52X 52X 47X 8X 12X 3X2X
#2 Phillips screwdriver #2 Robertson screwdriver
ASSEMBLY INSTRUCTIONS
AB
C D EF
GHI
JK

W-03R
2
STEP 1
Ensure all pins and cams are inserted in
parts before assembling. Attach small
support gable D to desk top A as
shown. Fasten pins and cams.
STEP 2
Lay large desk back B flat and lower
top and gable onto back as shown.
Fasten pins and cams.
STEP 3
Attach large left gable C as shown.
Fasten pins and cams. Lift unit right side
up.
A
D
B
C

W-03R
3
STEP 4
Attach small desk top supports E .
Ensure cams are facing in as shown.
Fasten pins and cams.
STEP 5
Attach transaction top F . Fasten pins
and cams.
STEP 6
Attach small back G as shown. Secure
with screws provided through large
desk back.
E
E
F
G

W-03R
4
STEP 7
Attach small support gable K to return
top H as shown. Fasten pins and cams.
STEP 8
Lay return back I flat and lower top and
gable onto back. Fasten pins and cams.
STEP 9
Attach large right gable J as shown.
Fasten pins and cams. Lift unit right side
up.
H
K
I
J

W-03R
5
STEP 10
Attach small desk top supports E .
Ensure cams are facing in as shown.
Fasten pins and cams.
STEP 11
Attach transaction top F . Fasten pins
and cams.
STEP 12
Attach small back G as shown. Secure
with screws provided through large
return back.
E
E
F
G

W-03R
6
STEP 13
To connect the desk and return ensure
that the green lockdowels are inserted
into the desk top. Line the lockdowels
with the slots in the return back. Slide
the return back into the desk back.
Fasten pins and cams.
STEP 14
Use flat connecting brackets to connect
return top and desk top as shown.
STEP 15
Use cover caps to cover any visible
cams and screws.

W-03L
1
DISCLAIMER
• Two people are recommended for the assembly of this product.
• Use hardware provided and tools recommended to avoid any product faults.
• Always assemble product on a clean soft surface to avoid scratching.
PARTS INCLUDED
HARDWARE INCLUDED
TOOLS REQUIRED
52X 52X 47X 8X 12X 3X2X
#2 Phillips screwdriver #2 Robertson screwdriver
ASSEMBLY INSTRUCTIONS
AB
C D EF
GHI
JK

W-03L
2
STEP 1
Ensure all pins and cams are inserted in
parts before assembling. Attach small
support gable D to desk top A as
shown. Fasten pins and cams.
STEP 2
Lay large desk back B flat and lower
top and gable onto back as shown.
Fasten pins and cams.
STEP 3
Attach large right gable C as shown.
Fasten pins and cams. Lift unit right side
up.
A
D
B
C

W-03L
3
STEP 4
Attach small desk top supports E .
Ensure cams are facing in as shown.
Fasten pins and cams.
STEP 5
Attach transaction top F . Fasten pins
and cams.
STEP 6
Attach small back G as shown. Secure
with screws provided through large
desk back.
E
E
F
G

W-03L
4
STEP 7
Attach small support gable K to return
top H as shown. Fasten pins and cams.
STEP 8
Lay return back I flat and lower top and
gable onto back. Fasten pins and cams.
STEP 9
Attach large left gable J as shown.
Fasten pins and cams. Lift unit right side
up.
H
K
I
J

W-03L
5
STEP 10
Attach small desk top supports E .
Ensure cams are facing in as shown.
Fasten pins and cams.
STEP 11
Attach transaction top F . Fasten pins
and cams.
STEP 12
Attach small back G as shown. Secure
with screws provided through large
return back.
E
E
F
G

W-03L
6
STEP 13
To connect the desk and return ensure
that the green lockdowels are inserted
into the desk top. Line the lockdowels
with the slots in the return back. Slide
the return back into the desk back.
Fasten pins and cams.
STEP 14
Use connecting flat brackets to connect
return top to desk top as shown.
STEP 15
Use cover caps to cover any visible
cams and screws.