Hay KORPUS Series User manual

– INSTRUCTION MANUAL –
DESIGN BY ANDREAS BERGSAKER
KORPUS SHELF

1
2
3
4 6
7
8 mm (5/16¨)
x2
x2
x2
x2x2x1x1
(5/16")
8mm
x2
9 cm (5½
″)
30 cm
(11
″)
60 cm
(23
″)
KORPUS
SHELF
DESIGN BY ANDREAS BERGSAKER
 INSTALLATION INSTRUCTIONS 
Follow the illustrated guide on the
opposite side of this page along with this
written guide.

1Identify the size of your shelf and
mark where to drill holes accordingly.

2Drill holes using a drill bit that fits the
size of your screws/wall plugs. If you
are using the provided wall plugs, use
a 8 mm (5/16”) drill bit.

3Identify your wall type. If it is a brick
wall or solid concrete, insert the
provided wall plugs. Other wall types
may require other types of fastening.
Consult a professional if in doubt.

4Insert the screws. Leave an 8 mm
(5/16”) gap for the shelf to hang on.

5Mount the shelf to the screws.

6Push the shelf down so that it hangs
on the screws. Make sure to insert the
screws in the designated cut-outs,
and not behind the hooks.

7Finally, tighten the screws, without
using too much force.
Our Care & Maintenance offers
guidance for optimal maintenance of
your HAY product. It includes advice
and instructions on cleaning and
caring for specific materials to prolong
the life of your furniture.
Please find our Care & Maintenance
guide by scanning the QR code above.
You can find more relevant information on
Korpus Shelf by scanning the QR code.
You can also find the same information
at hay.dk/downloads
 CARE & MAINTENANCE 
– WARNING –
When properly mounted to the wall:
Total max. load:
10 kg/22 lbs
Max. load on each individual hook:
5 kg/11 lbs
The provided wall plugs and screws are
designed for brick wall or solid concrete
only. Please indentify your wall type before
mounting and use alternative fastening
hardware if needed. If in doubt, consult a
professional.
5

22122021
Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
www.hay.com