JONATHAN ADLER Scalinatella User manual

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
F URNIT URE
Scalinatella Coffee Table
Assembly Instruction
• For ease of assembly two people are recommended.
Parts Included:
Box 1:
• (2pcs) Table Base– A
Hardware Enclosed:
Box 2:
• (1pc) Table Top Marble –B
Assembly Instructions:
1. Remove all the components from their boxes and place them on a carpeted or
scratch-free surface. Equally place the both Table Bases (A) at the ground and then
insert into the corresponding hole.
①
5/32”-32T x
12mmL
4pcs
②
1/4”-20Tx18mmL
4pcs
③
Flat washer
4pcs
④
Spring washer
4pcs
⑤
Allen Wrench
1pc

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
2. Attach both Table Bases (A) and secure with the Screws ① using the screwdriver on
both sides, don’t screw tightly in this step.
3. Place the assembled Table bases (A) upside down, secure with the Screws ① using the
screwdriver on both sides, then need to tighten all screws ① in this step.

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
4. Put the assembled Table bases (A) upside down on the Table Top (B), align the pre-drilled
holes, secure with the spring washers ④ , flat washers ③ and bolts ② using the enclosed
Allen Key ⑤ .

JONATHAN ADLER ENTERPRISES • 333 HUDSON STREET 7TH FLOOR NY, NY 10013 • T. 212.645.2802 F. 212.645.3072 • jonathanad er.com
5. Assembly is completed.