Target Windham User manual

>>
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
windham
coffee table
assembly instructions
style # WNCOFFTBWH (shell)
dpci # 249-16-0772
tcin # 14373231
style # WNCOFFTBBL (teal)
dpci # 249-16-0773
tcin # 14372256
style # WNCOFFTBRD (red)
dpci # 249-16-4309
tcin # 50076905
style # WNCOFFTBBK (black)
dpci # 249-16-4310
tcin # 50076908
style # WNCOFFTBGY (gray)
dpci # 249-16-4311
tcin # 50076907

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-14
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 17
wooden dowel
(H2) x 19
cam bolt
(H3) x 19
cam
(H4) x 7
at head screw
(H5) x 2
pull bolt
(H6) x 2
pull

5
exploded diagram
ITEM DESCRIPTION QUANTITY
A top panel 1
B right side panel 1
C left side panel 1
D back panel 1
E bottom trim 1
F drawer face 1
G drawer bottom 1
H drawer back 1
I drawer right side 1
J drawer left side 1
K drawer support 1
L shelf 1
M top trim 1

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
1. 2. 3.
4. 5.

step 1: attach shelf/bottom trim/top trim/back panel to left side panel
(H1) x 4
wooden dowel
(H2) x 5
cam bolt
(H3) x 5
cam
1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
1.4. Do not over tighten bolts.
7
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

step 2: attach right side panel
(H1) x 4
wooden dowel
(H2) x 5
cam bolt
(H3) x 5
cam
2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
2.4. Do not over tighten bolts.
8
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

step 3: attach top panel
(H1) x 4
wooden dowel
(H2) x 6
cam bolt
(H3) x 6
cam
(H4) x 2
at head screw
3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
3.4. Do not over tighten screws.
9
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

step 4: attach drawer right side/support/left side to drawer face
(H1) x 3
wooden dowel
(H2) x 3
cam bolt
(H3) x 3
cam
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
4.4. Do not over tighten bolts.
10
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.