Health O Meter Professional Digital Scale Wireless USB... User manual

Health o meter® Professional
Digital Scale Wireless USB Station
User Instructions
P/N UMWIFIUSB Rev20141231
1

Thank you for your purchase of this Health o meter®Professional product. Please read this manual
carefully, and keep it for easy reference or training.
TABLE OF CONTENTS
3 Wireless Configuration - WAP/WPA2 17Caution and Warning
Windows Requirements 3 Administrator Configuration 18
4 Wireless Network Communication 19Service
Package Contents 5 Maintenance 20
5
Connecting to a Health o meter®
Professional Scale 21PC Requirements
6 Disconnecting from a Health o meter®
Professional Scale 22Product Overview
7 Firmware Upgrade 23Hardware Installation
Software Installation 10 Troubleshooting 25
Configuration - Control Center 11 Factory Defaults 26
Configuration - Web Page 12 Limited Warranty 31
14
Federal Communication (FCC)
Statement 32General Settings
Wireless Configuration - WEP 15 CE Statement 33
For User Instructions updates and revisions please go to:
http://www.homscales.com
2

3
CAUTION AND WARNING
To prevent installation and performance issues to your PC, please follow these instructions
carefully.
To prevent unsuccessful installation, exercise caution when installing Health o
Meter®Professional Scales Allscripts Connectivity App.
For accurate data collection, confirm and upload the data according to the procedure
described in this manual.
If the Interface software becomes damaged or corrupted, do not operate the application.
Reinstall the Interface software per installation guide instructions.
Windows Requirements
This installation is exclusively compatible with Windows®XP, Vista, and 7.
In addition, the installation also requires Windows Installer 3.1 or higher. Most versions of
Windows have this installed already. If it's not listed as an optional update in Windows Updates;
Installation also requires the .NET 4.0 Client Profile to be installed on your PC. If this is not
already installed, this is available as an option through Windows Update.
You can download these software tools from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5A58B56F-60B6-4412-95B9-
54D056D6F9F4
*Windows is a registered trademark of Microsoft Corporation.

4
SERVICE
Customer Service Information
For further information or telephone support, please contact Customer Service at:
Telephone: [phone]
Email: [email protected]

5
Package Contents
o1 x Wireless 4-Port USB Station
o1 x Installation Manual
o1 x Installation CD
o1 x Warranty / Registration Card
o1 x Power Adapter
o1 x USB Cable
o1 x Ethernet Cable
PC Requirements
oCPU of 1.7GHz and above
oMinimum 512MB RAM
oWindows XP/Vista/7
oAvailable wireless router in home/office network

Product Overview
1. USB connected LED
2. USB port located on the front
3. On/Off Switch
4. Power adapter connector
5. Reset button
6. Network port
7. USB ports located on the back
8. Antenna
Figure 1
NOTE: Before you connect your Health o meter®Professional scale to the Wireless USB
Station, please refer to the user manual and install the driver on your computer first.
6

Hardware Installation - Step 1
1. Connect your Health o meter®Professional scale USB port to any one of the USB ports on the
Wireless USB Station. Place the Wireless USB Station on a shelf or table near the scale.
Figure 2
7

Hardware Installation - Step 2
2. Connect the Wireless USB Station to the router, switch or office Ethernet network with the
included Ethernet cable.
Figure 3
8

Hardware Installation - Step 3
3. Connect the power adapter to the Wireless USB Station and turn it on using the On/Off
switch. The USB connected LED will turn on indicating that unit is correctly connected to
the network. Turn on your Health o meter®Professional scale.
Figure 4
9

Software Installation
Please insert the installation CD into your Windows based PC. The CD should auto play and
bring up the software installer.
If you have disabled the auto-play function, please browse the CD and run the set-up program
manually.
Follow the instructions of the wizard to complete the installation process. Once the installation is
complete, click "Finish" to launch the application.
Figure 5
10

Configuration - Control Center
1. Run the IOGEAR Wireless 4-Port Station
Control Center. It will automatically find
the Wireless USB Station and show the
device name as “GUWIP204” and display
the status
2. Select GUWIP204 and click on the
"Configure Server" icon.
Figure 6
11

Configuration Web Page
3. This will bring up the configuration page in your web browser. Click "CONFIG" tab.
Figure 7
12

Configuration Web Page
4. Enter the default Administrator Username (admin) and default Password (admin) to
login. This will bring you to the Wireless USB Station (GUWIP204) Configuration page.
Figure 8
13

General Settings
The Configuration page has four (4) tabs. General, Wireless, Administrator and Maintenance.
Select "General" tab, you can either assign an IP address to the Wireless USB Station or you can
automatically get an IP address by using DHCP (Recommended). Scroll to the bottom of the
page and click "Submit" to save any changes.
Figure 9
Figure 10
14

Wireless Configuration - WEP
1. Next, configure the wireless settings by selecting "Wireless" tab. Scan for your wireless
network by clicking the "Enter" button in the Site Survey Setting selection.
Figure 11
15

Wireless Configuration - WEP
2. Select your wireless network and click the "Set" button.
Figure 12
3. Next choose the security system and enter key which are suitable to your AP wireless setting.
Once that is completed, scroll to the bottom of the page and click "Submit" to complete the
wireless configuration.
Figure 13
16

Wireless Configuration - WPA/WPA2
1. Select your Network Type from the drop down menu.
2. Type in the SSID for the wireless network.
3. Select your Security System between WPA or WPA2. This would be determined by the type
of wireless network security that was setup when the router was configured. Then choose the
Key Format for your wireless network password. Then enter the Pre-Shared Key, this is the
pass key for your wireless network. Finally choose the Encryption type that was setup for the
pass key.
4. Scroll down and click on the "Submit" button. Allow the Wireless USB Station to restart and
come back to the login screen. Then the Wireless USB Station can be powered off and
disconnected from the hard wire Ethernet connection. You can then power on the Wireless
USB Station and the device be should recognized by the Wireless USB Station software. The
WAN LED should start blinking.
Figure 14
17

Administrator Configuration
1. By clicking the "Administrator" tab on the Configuration page, you can change the
administrator user name and password. You can also add users or remove users.
Figure 15
18

Wireless Network Communication
Open the IOGEAR Wireless 4-Port Station Utility. You should see the device name,
GUWIP204, a few seconds after the utility is opened. If you do not see the GUWIP204 in the
list, you will need to plug the Ethernet cable back in and double check the GUWIP204 wireless
configuration settings.
Figure 16
19

Maintenance
Clicking on the "Maintenance" tab on the Configuration page will take you to the maintenance
section where you can reset the device, restore to factory settings, or upgrade the firmware. For
the latest firmware versions, be sure to check the IOGEAR website, www.iogear.com .
Figure 17
20