Healthmark MAG-225 User manual

Instructions for Use: Interchangeable Magnifying Lamp
Brand Name of Product
Interchangeable Magnifying Lamp
Generic Name of Product
Interchangeable Magnifying Lamp
Product Code Number(s)
MAG-225, MAG-LENS, MAG-L5D, MAG-L8D, MAG-L12D, MAG-L15D
Intended Use
Designed for optical inspection of items and equipment with multiple lenses to expand
the magnification range for inspection of items.
Range of Applications for Product
Items to be optically inspected.
Key Specifications of Product
●4 Diopter glass lens- 2.25x magnification (additional lens sold separately)
o8 diopter- 3x magnification
o12 diopter- 4x magnification
o15 diopter- 4.75x magnification
●Designed to be used with multiple lenses.
●Fully covered spring arm - no pinching hazards
●360 rotatable lamp head
●Max reach 36 inches
●64 ultra-bright LEDs with adjustable brightness controls
●Includes a table clamp and power adapter
●Power supply
oInput- 100-240V-50/60Hz
oOutput- 26V 500mA
oWattage- 6W
Shipping & Storage
Shipping Conditions &
Requirements
Storage Conditions
Packaging Contents
Shelf Life
Instructions for Using Product
Description of Use(s)
Designed for visual inspection of items
Preparation for Use
1. Attach the table clamp to the side of the table and tighten securely.
2. Insert the magnifying lamp into the table clamp.
3. Connect the power adapter to the power port on the lamp.
4. Plug the power adapter into the power outlet.
Diagrams (drawings, pictures)
Figure 1

Figure 2
Figure 3
Figure 4
Figure 4A

Figure 4B
Steps for Use of Product
1. Turn the On/Off switch to the On position. Fig 1
2. Use the brightness controls on the top of the magnifying lamp to select the level
of LED brightness. Fig. 2
3. To remove the lens, hold onto the lamp with one hand. Remove the lens by
pushing up from underneath and grab the rubber ring of the lens with the other
hand. Fig. 3
4. Still holding the lamp with one hand, push the lens in the lamp opening by the
rubber ring until it is secured. Fig. 4, 4A, 4B
Interpretation of Test Results
Contraindications of Test Results
Documentation
Special Warnings and Cautions
●Prior to switching the interchangeable lens, hold the lamp with one hand.
Otherwise, the arm of the magnifier will spring up once the lens has been
removed.
●Keep the additional lens in the zip-up carrying case to avoid damage.
Disposal
Reprocessing Instructions
Point of Use
Preparation for Decontamination
Disassembly Instructions
Cleaning –Manual
●Wash in warm soapy water or use lens cleaner.
●Dry with a clean soft cloth (never use abrasive cleaners).
Cleaning –Automated
Disinfection
●To clean the lens: Wipe the lens with Isopropyl alcohol wipe (do not use on the
magnifying lamp as it may damage the plastic finish).
●To clean the lamp: Wipe the lamp with a multi-surface disinfectant and non-
linting wipe (do not use on lens and it may cause damage).
Drying
Maintenance, Inspection, and
Testing
Reassembly Instructions
Packaging
Sterilization
Storage
Store lens in zip-up carrying case.
Additional Information
Related Healthmark Products
Optical Inspection Products
Other Product Support Documents
ProSys™ Brochure, ProSys™ Price List
Reference Documents
Customer Service Contact
Healthmark Industries Company, Inc.
18600 Malyn Blvd.
Fraser, MI 48026
1-586-774-7600
[e-mail]
hmark.com
2019-11-15 Suzanne Latta
Rev. A