Heart of House abingdon 4124566 User manual

23465758
osaka
width: 40,0 cm
depth: 40,0 cm
height 59,6 cm
assembly instructions - please keep for future reference
if you need help or have damaged or missing parts, call the argos customer helpline: 03456 400 800
abingdon
4124566
dimensions
width: 101.2 cm
depth: 40.0 cm
height: 76.0 cm
issue 1 - 08-06-2015
350812-01

!safety and care advice
important - please read these instructions fully before starting assembly
care and maintenance
1
• assembly should be carried
out by a competent adult
only.
• check you have all the
components and tools listed
on pages 2 and 3.
• do not use this product if
any components are missing
or damaged.
• remove all fittings from the
plastic bags and separate
them into their groups.
• keep children and animals
away from the work area,
small parts could choke if
swallowed.
• make sure you have enough
space to layout the parts
before starting.
• do not stand or put weight
on the product, this could
cause damage.
• assemble the item as close
to its final position (in the
same room) as possible.
• assemble on a soft level
surface to avoid damaging
the unit or your floor.
• parts of the assembly will
be easier with 2 people.
• we do not recommend the
use of power drill/drivers for
inserting screws, as this could
damage the unit. Only use
hand screwdrivers.
• dispose of all packaging
carefully and responsibly.
• made for home retail group,
milton keynes.
• only clean using a damp
cloth and mild detergent, do
no use bleach or abrasive
cleaners.
• regularly check fastenings
to ensure they are tightened. • this product should not be
discarded with household
waste.
take to your local authority
waste disposal centre.
note: if required the next
page can be cut out and
used as reference
throughout the assembly.
keep this page with these
instructions for future
reference.

if you have damaged or missing components, call
the argos customer helpline: 03456 400 800
components - panels
please check you have all the panels listed below
2
350812-03
12
(22,9 cm x 9,6 cm)
drawer back
13
(23,8 cm x 29,7 cm)
drawer bottom
11
(30 cm x 9,6 cm)
drawer side, right
1
(101,2 cm x 40 cm)
top
8
(88,2 cm x 6 cm)
front rail
7
(88,2 cm x 15 cm)
back rail
10
(30 cm x 9,6 cm)
drawer side, left
4
(11,9 cm x 30,4 cm)
divider
2
(15 cm x 30,6 cm)
side, left
3
(15 cm x 30,6 cm)
side, right
9
(29,0 cm x 12,5 cm)
drawer front
15
(43,0 cm x 5,0 cm)
post, left
16
(43,0 cm x 5,0 cm)
post, right
17
(29,4 cm x 9,2 cm)
rail
6
(74,5 cm x 5 cm)
post, right
5
(74,5 cm x 5 cm)
post, left
14
(39 cm x 39 cm)
seat
3
x
2
x
2
x 4
x
2
x
3
x
3
x
3
x
2
x
2
x
2
x

components - ttings
please check you have all the panels listed below
note: the quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
3350812-04
54
ø7.8 x 40mm wooden dowel x
Aa
Cp
ø5 x 11, cc34mm bolt x 28
Ca
ø15 x 10.5mm cam x 28
Kb
ø5.8 x 8mm screw x 12
17060 16040 90 15013070 120100 14011050 803020100
ruler - use this ruler to help correctly identify the screws
tools required
flatblade screwdriver
(medium)
hammer phillips screwdriver
(medium & large)
back fitting w. ø3.5 x 15mm screw x
Fi
6
54mm handle x
Gm
3
m4 x 20mm screw x
Hd
3
ø3.5 x 35mm screw x
Ba
12
ø3 x 12mm screw x
Bo
12
wall strap and instruction x 1
Fh
3
CL
300mm drawer runner, left, side x 3
CR
300mm drawer runner, right, side x
3
DR
300mm drawer runner, right x 3
DL
300mm drawer runner, left x
Kf
6 ø5.8 x 19mm screw x
ø18 x 9mm spacer x
Nu
6
ø3.5 x 15mm screw x
Bc
8
Vn
angle 23 x 23 x 24mm x
4
6mm allen key x
Yc
1
Yb
10/13mm wrench x
1
Nc
ø6 / ø11mm washer x
8
Na
m6 x 10mm nut x 8
Hf
m6 x 60mm threaded rod x 8
ø5 x 38mm screw x
Dj
4
Fe
ø35mm bracket x 8
Nh
8 m6 x 13mm bush x

assembly instructions
place the posts
5
and
6onto the sides 2
and
3
as shown.
push cams
Ca
into the
holes indicated on the
sides
2
and
3
. arrows
pointing towards the
posts
5
and
6
.
turn the cams
Ca
to the
right to x the
posts
5
and
6
.
step 1.3
assembly of the
dressing table.
step 1
knock the dowels
Aa
into the holes indicated
on the sides
2
and
3
,
and the dividers
4
using
a small hammer.
step 1.1
screw the bolts
Cp
into
the holes indicated on the
posts
5
and
6
.
step 1.2
4
350812-05
6
5
2
5
7
6
1
8
6
5
3
244
20 ø7.8 x 40mm wooden dowel x
Aa
Cp
ø5 x 11, cc34mm bolt x 8
Ca
ø15 x 10.5mm cam x 8
3
5
6
6
5
3
42
Aa Aa
Aa
Aa Aa Aa
Aa
Aa Aa Aa
Cp
Cp
Ca Ca
Ca
Ca Ca
Ca
2
x
2
x
2
x