Heart of House abingdon 4147718 User manual

23465758
osaka
width: 40,0 cm
depth: 40,0 cm
height 59,6 cm
assembly instructions - please keep for future reference
if you need help or have damaged or missing parts, call the argos customer helpline: 03456 400 800
abingdon
4147718
dimensions
width: 86.1 cm
depth: 43.0 cm
height: 119.1 cm
issue 1 - 02-06-2015
350809-01

!safety and care advice
important - please read these instructions fully before starting assembly
care and maintenance
1
• assembly should be carried
out by a competent adult
only.
• check you have all the
components and tools listed
on pages 2 and 3.
• do not use this product if
any components are missing
or damaged.
• remove all fittings from the
plastic bags and separate
them into their groups.
• keep children and animals
away from the work area,
small parts could choke if
swallowed.
• make sure you have enough
space to layout the parts
before starting.
• do not stand or put weight
on the product, this could
cause damage.
• assemble the item as close
to its final position (in the
same room) as possible.
• assemble on a soft level
surface to avoid damaging
the unit or your floor.
• parts of the assembly will
be easier with 2 people.
• we do not recommend the
use of power drill/drivers for
inserting screws, as this could
damage the unit. Only use
hand screwdrivers.
• dispose of all packaging
carefully and responsibly.
• made for home retail group,
milton keynes.
• only clean using a damp
cloth and mild detergent, do
no use bleach or abrasive
cleaners.
• regularly check fastenings
to ensure they are tightened. • this product should not be
discarded with household
waste.
take to your local authority
waste disposal centre.
note: if required the next
page can be cut out and
used as reference
throughout the assembly.
keep this page with these
instructions for future
reference.

if you have damaged or missing components, call
the argos customer helpline: 03456 400 800
components - panels
please check you have all the panels listed below
2
350809-03
2
(111,3 cm x 38 cm)
side, left
13
(71,2 cm x 18,2 cm)
drawer back
14
(72,2 cm x 37,7 cm)
drawer bottom
12
(38 cm x 18,2 cm)
drawer side, right
2
x
1
(85 cm x 43 cm)
top
3
(111,3 cm x 38 cm)
side, right
4
(117,6 cm x 5,0 cm)
post, left
7
(76,1 cm x 9,2 cm)
front rail
6
(76,1 cm x 7 cm)
back rail
8
(108,5 cm x 39,2 cm)
back
5
x
5
x 5
x
5
(117,6 cm x 5,0 cm)
post, right
11
(38 cm x 18,2 cm)
drawer side, left
2
x
10
(75,5 cm x 20,9 cm)
drawer front
9
(106,0 cm x 1,7 cm)
h-profile
2
x
5
x
5
x

components - ttings
please check you have all the panels listed below
note: the quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
3350809-04
26 ø7.8 x 40mm wooden dowel x
Aa
Cb
ø5 x 8, cc34mm bolt x 26
Ca
ø15 x 10.5mm cam x 26 1.2 x 15mm nail x
Di
50
Kb
ø5.8 x 8mm screw x 30
17060 16040 90 15013070 120100 14011050 803020100
ruler - use this ruler to help correctly identify the screws
tools required
flatblade screwdriver
(medium)
hammer
phillips screwdriver
(medium & large)
back fitting w. ø3.5 x 15mm screw x
Fi
10
ø4 x 25mm screw x
Jb
16
54mm handle x
Gm
10
m4 x 20mm screw x
Hd
10
2
Vl
44 x 23 x 23mm angle x
Ko
8 ø4,2 x 9,5mm screw x
ø3.5 x 35mm screw x
Ba
30 ø3 x 12mm screw x
Bo
20
wall strap and instruction x 1
Fh
5
CL
350mm drawer runner, left, side x
5
CR
350mm drawer runner, right, side x
5
DR
350mm drawer runner, right x
5
DL
350mm drawer runner, left x

assembly instructions
x the posts
4
and
5
onto the sides
2
and
3
using screws
Jb
into the
holes indicated.
the top of the posts
4
and
5
and the sides
2
and
3
must be ush.
step 1.1
assembly of the chest.
step 1
knock the dowels
Aa
into the holes indicated
on the sides
2
and
3
using a small hammer.
screw the bolts
Cb
into
the holes indicated on the
sides
2
and
3
.
step 1.2
4
350809-05
Cb
ø5 x 8, cc34mm bolt x 2
ø4 x 25mm screw x
Jb
16
4
ø7.8 x 40mm wooden dowel x
Aa
Jb
Cb
Cb
Aa
Aa
Aa
Aa
Jb
Jb
Jb
Jb
Jb
Jb
Jb
3
5
45
4
2
7
5
4
2
5
8
1
3
4
6
3
2
8
9
Jb
Jb
Jb
Jb
Jb
Jb
Jb
Jb

assembly instructions
x the drawer runners
CL
and
CR
to the sides
2and 3using screws
Kb
through the holes as
indicated.
See details.
step 1.3
knock the dowels
Aa
into the holes indicated
on the back rail
6
using a small hammer.
step 1.5
x the angles
Vl
using
screws
Ko
into the holes
indicated on the front
rail
7
.
step 1.4
350809-06
5
note the hole!
bottom end of
right hand side
Kb
ø5.8 x 8mm screw x 30
5
CL
350mm drawer runner, left, side x
5
CR
350mm drawer runner, right, side x
Ko
Ko
Aa
Aa
6
2 ø7.8 x 40mm wooden dowel x
Aa
2
Vl
44 x 23 x 23mm angle x
Ko
4
ø4.2 x 9.5mm screw x
Vl
Ko
7
2
3
Kb
CL
Kb
CR
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
Kb
CL
CL
CL
CL
CL
CR
CR
CR
CR
CR
Vl

assembly instructions
place the sides
2
and
3
onto the back rail
6
.
push cams
Ca
into the
holes indicated on the back
rail
6
, arrows pointing
towards the sides
2
/
3
.
turn the
cams
Ca
to
the right
to x the
sides
2
and
3
.
step 1.7
screw the bolts
Cb
into
the holes indicated on the
top
1
.
step 1.6
place the top 1onto
the sides 2and 3.
push cams
Ca
into
the holes indicated
on the sides 2and
3, arrows pointing
towards the top 1.
turn the cams
Ca
to the
right to x the top 1.
step 1.8
6
350809-07
6
1
Ca
Ca
Ca
Ca
Ca
ø15 x 10.5mm cam x 2
Ca
ø15 x 10.5mm cam x
4
2
3
2
3
Ca
Cb
Cb
Cb
Cb
1
Cb
ø5 x 8, cc34mm bolt x
4

assembly instructions
step 1.10
place the backs 8into
the rabbet on the top
1, into the h-prole
9and onto the posts
4and 5.
!
important!
make sure the
angle between
the top
1
and the posts
4
and
5
is 90° when
the backs
8
is attached.
x the backs
8
to the top
1
and the posts
4
/
5
and the back rail
6
using
nails
Di
.
use a small hammer.
place the front rail 7
as shown.
x the angles
Vl
to the
sides using screws
Ko
.
see detail.
step 1.9
350809-08
7
Ko
distribute equally !
7
Di
Di
4
5
1
1
1
6
Di
Ko
4
ø4.2 x 9.5mm screw x
1.2 x 15mm nail x
Di
30
7
Di
8
8
9
88

assembly instructions
x the drawer sides 11
and 12 to the drawer
back 13 as shown,
using screws
Ba
.
step 2.1
assembly of the
drawers.
step 2
!
important!
its recommended that
the chest of drawers is
xed to the wall.
use the ttings
Fh
.
follow the instructions
included with the
ttings.
step 1.11
350809-08
7
Ko
distribute equally !
7
Di
Di
4
5
1
1
1
6
Di
Ko
4
ø4.2 x 9.5mm screw x
1.2 x 15mm nail x
Di
30
7
Di
8
8
9
88
8
350809-09
12
Ba
Ba
13
14
12
13
5
x
5
x
ø3.5 x 35mm screw x
Ba
30
wall strap and instruction x 1
Fh
11
11
10

assembly instructions
step 2.5
push the drawer front
10
onto the drawer sides
11
and
12 .
place cams
Ca
into the
holes indicated, arrow
pointing towards the front.
turn the cams
Ca
to the
right to x the front.
step 2.3
screw the bolts
Cb
into
the holes indicated on
the drawer front 10 .
slide the drawer bottom
14
into the drawer sides
11
and
12
.
step 2.4
knock the dowels
Aa
into the holes indicated
on the drawer sides 11
and 12 using a smal
hammer.
step 2.2
350809-10
9
Ca
ø15 x 10.5mm cam x 20
Ca
Ca
5
x
12
11
14
11
12
Cb
ø5 x 8, cc34mm bolt x 20
5
x
5
x
5
x
11
Aa
Aa
12
20 ø7.8 x 40mm wooden dowel x
Aa
Cb
Cb
10
Aa
Aa

assembly instructions
step 2.6
!
important!
make sure the
angle between
the drawer front
10
and
the drawer sides
11
and
12
is 90° before the drawer
bottom
14
is xed using
Fi
as shown.
to adjust the angle between
the drawer sides and the
fronts push the tting
Fi
sidewards.
see details.
step 2.7
place the drawer runners
DL
and
DR
onto the drawer
sides
11
and
12
and push
them onto the back of the
front
10
.
x the drawer runners
DL
and
DR
to the drawer sides
11
and
12
using screws
Bo
into the holes indicated.
350809-10
9
Ca
ø15 x 10.5mm cam x 20
Ca
Ca
5
x
12
11
14
11
12
Cb
ø5 x 8, cc34mm bolt x 20
5
x
5
x
5
x
11
Aa
Aa
12
20 ø7.8 x 40mm wooden dowel x
Aa
Cb
Cb
10
Aa
Aa
10
350809-11
90°
5
DR
350mm drawer runner, right x
5
DL
350mm drawer runner, left x
ø3 x 12mm screw x
Bo
20
11
12
Bo
5
x
Fi
Fi
Fi
14
10
11
12
Fi
Fi
back fitting w. ø3.5 x 15mm screw x
Fi
10
Bo
Bo
DR
DL
Bo
DL
5
x

assembly instructions
if you need help or have damaged or missing parts, call the argos customer helpline: 03456 400 800
home retail group - 489-499 avebury boulevard - saxon gate west - central milton keynes mk9 2nw
step 2.8
x the metal handles
Gm
to the drawer fronts
10
using screws
Hd
.
slide the drawers onto
the runners and into the
chest.
step 2.9
350809-12
11
m4 x 20mm screw x
Hd
10
5
x
Hd
54mm handle x
Gm
10
Gm
Gm
Hd
10

350809-12
11
m4 x 20mm screw x
Hd
10
5
x
Hd
54mm handle x
Gm
10
Gm
Gm
Hd
10
No.3 "Shield Anchor" Wall Plug
Heavy Loads
For use with heavier loads such as TV
& HiFi Speakers and Satellite Dishes etc.
No.4 "Cavity Fixing" Wall Plug
For use with plaster board partitions or
hollow wooden doors.
No.5 "Cavity Fixing - Heavy Duty"
Wall Plug
For use when fitting or supporting heavy
loads such as shelving, wall cabinets,
coat racks.
IMPORTANT:
When drilling into walls always check that there are no
hidden wires or pipes etc. Make sure that the screws and
wall plugs being used are suitable for supporting your unit.
Consult a qualified tradesperson if you are unsure.
HINTS:
1) General Rule Always use a larger screw and wall plug if you are not sure.
2) Ensure you use the recommended drill bit to match the wall plug and hole size.
3) Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
4) Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure the plug is fitting below the ceramic
tile to avoid splitting or cracking.
5) Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types Of Walls
You can use one of the following types
of wall plug if your walls are made of
brick, breeze block, concrete, stone,
wood or plaster board.
No.1 "Standard" Wall Plug
General Wall Materials
These come in various sizes and are made
from plastic or sometimes wood fiber.
No.2 "General Purpose" Wall Plug
Aerated / Breeze Block
Generally aerated blocks should not be
used to support heavy loads, use a
specialist fitting in this case.
For light loads, a General Purpose Plug
can be used.
No.6 "Hammer Fixing" Wall Plug
For use with walls stuck with plaster
board. The hammer fixing allows it to
be fixed to the wall rather than the plaster
board. Always check the fixing is secure
to the retaining wall.
CARE & MAINTENANCE
SAFETY
Always check the fitting and
location to ensure your safety in
and around the home.
FITTING
From time to time check the fitting
to ensure the wall plugs or screws
do not become loose.
Wall Mounting & Fixings
A Guide to