Hearth & Home 8000TR User manual

487-925-C 5/99
LOG PLACEMENT
INSTRUCTIONS
Model: 8000TR
1. Positioning the back log #1: (SRV487-701)
The back log is the biggest log. Set the log be-
hind the two back brackets with the split look
towardthefront. Thebacklogshouldbebrought
forward until it comes in contact with the brack-
ets.Theloghangs4”overtherightgratebarand
3” over the left grate bar.
For Liquid Propane (LP) unit bend the back two
brackets located on the right and left along the
cut slots toward the back at 900angle.
2. Positioning the left log #2: (SRV446-703)
Identify the log and then hold it with pointed end
towardtheright.Setthelogonthegrateandbring
the left end towards the front until it comes in
contact with the grate bar. Push the right end
back against the bracket. The left end of the log
should hang 2 1/2” over the left grate bar.
3. Positioning the right log #3: (SRV446-702)
Identify the log and then hold it with pointed end
towardtheleft. Set the log onthegrate and push
it back against the two right front brackets. The
pointed end should come in contact with the
middlebar.

4. Positioning the right middle log (split log) #4:
(SRV487-703)
Hold the log with the split towards the front and
the burned area towards the back. Set the front
endofthelogbetweenthesecondleftandmiddle
gratebarandlaythelog onto the back log. Main-
tainthe81/2”dimensionforlocatingthislogwith
respect to the back log.
5. Positioningthe left middlelog #5: (SRV487-702)
This log is the second biggest log. Hold the log
with the detail toward the top and the log curv-
ingtowardsthe left. Set theend on the top ofthe
front end of the right middle log (between the
second left bar and the middle bar) and then lay
thebackendontothebacklog.Maintainthe51/2”
dimension for locating this log with respect to
the back log.
NOTE: Fasten Logs #4 and #5 to the back log
(#1) with two screws provided with the owner’s
manual.
6. Locating the right front log #6: (SRV402-701)
This log is shaped like “Y”. Hold the log with the
pointed end towards the top and the detail to-
wards the front. Set the branched end around
thefront end ofthe right baron the grateand lay
the pointed end until it comes in contact with the
burned area on the right middle log.
7. Positioningtheouter leftlog#7: (SRV446-714)
Identify the log and then hold it with the pointed
end towards the top. This log sits right behind
the left log outside the grate and it lays towards
the back log (this log sits outside the burner
area).