Heat Experience Battery Heated Gloves User manual

EN
BATTERY HEATED GLOVES
USER MANUAL

GLOVE OVERVIEW
Power button
Three heating levels
Velcro adjustment
Secures a snug t under your jacket.
Carabin loop
Dry your gloves the right way

EN
Leather palm
Ensures good grip
Battery pocket
With waterproof zipper
Touch nger
Use touh devices without removing glove

BEFORE USE
Congratulations on your new Heat Experience Heated Gloves. Before
you start using them there are some things you should know.
The batteries Heated Gloves should be fully charged before
rst use, or after a long period (2 months or more) of no use.
Charge the battery by connecting both batteries to the
supplied charger. When the red light is lit, charging is
ongoing.
Charging takes about 3 hours, When charging is
complete, the red light turns off, and a green light turns on.
The heated gloves have three different heating levels. We
reccomend that you get to know how they wok for you
before you head out on longer lasting adventures.
1

EN
QUICK TIPS!
Care of gloves & leather
The palm of the gloves are made of sheep leather. This
ensures a good grip and durability, but it is important to take
good care of the gloves to keep them this way.
Treat the leather parts of the glove with suitable leather
treatment, and let dry roperly before use.
This simple steps will ensure that your glove will last longer.
Read the care instructions for more information about how
to best take care of your gloves.
2

USE
Getting started
Open the zipper on the battery pocket and connect the
battery to the cable before inserting it into the pocket.
The button will blink three times, if not, the battery needs
recharging.
For optimal comfort, make sure that the cables runs in a
smooth way.
Press and hold the button on the glove for ~3 seconds, until
the light turns on. The glove is now heating up, and the red
light should be blinking slowly. This process takes about 5
minutes. you can pres the button once more to go directly in
to one of the modes, this will however reduce the “heat boost
effect”
3

EN
3h
1. CHARGE BATTERY
2. CONNECT BATTERY
3. TURN ON (HOLD THE BUTTON)

CARE AND MAINTAINANCE
some tips for optimal durability and comfort.
We do not reccomend to wash your gloves often, but
sometimes it is neccessary.
Remember to remove battery before washing.
1) Put your glove on and use a cloth with lukewarm water and
soap. Squeese the glove carefully after wash.
2) While the glove is still humid, you can apply leather care.
3) Gloves should be dried in room temperature. Hang them
from the carabine loop, so they are dried upright. Avoid
tumble driers, open ames, heaters and ovens.
4) Do not turn the gloves inside out. This could lead to
misplacement of the liner, insulation or heating elements/
cables.
4

EN
HEATING LEVELS
CERTIFICATIONS
Level Temperature* Indicator light Duration*
I45°C/113°F Blue 5 hours
II 50°C/122°F White 3.5 hours
III 55°C/131°F Red 2 hours
*The duration and given temperature will vary depending on
ambient temperature and conditions.

CAUTION
Keep out of high temperatures. The built-in polymer lithium battery
may explode or be damged if exposed of high temperatures or re.
Do not charge unattended, use only original charger.
Battery may explode if disposed of in re.
Do not crush or dissasemble.
All components should be recycled in according to local laws and
regulations.
Keep the heated gloves away from children.
Should not be used by users unable to feel changes in temperature.

EN
CONTACT
Do you have any more questions, feel free to reach out;
e-mail: [email protected]
Address:
Heatexp AS
Olav Tryggvasons Gate 30, C/O DIGS
7011 Trondheim
NORWAY
Read more about Heat Experience, discover new products, and get
inspired on our webpage www.heatexperience.eu
Follow us on social media:
facebook.com/theheatexperience
Instagram: Heat Experience
We hope you enjoy your product.
Kind regards, The Heat Experience Team.