hebvest MG12HD User manual

hebvest.com t 407.274.4146 |f 407.264.6309 |[e-mail]
operator’s manual
#12 and # 22 Electric Meat Grinders
Model No. Description HP
MG12HD #12 Meat Grinder - Heavy Duty 1 HP
MG22HD #22 Meat Grinder - Heavy Duty 1.5 HP
performance • reliability • simplicity
13-HBV-003 MeatGrinerOperatorsManual_2.indd 1 7/10/13 7:40 PM

hebvest.com t 407.274.4146 |f 407.264.6309 |[e-mail]
spare parts list #12 and # 22 Electric Meat Grinders
Callout MG12HD Part Number MG22HD Part Number Description
1 PMG1201 PMG2201 Meat Funnel
2 PMG1202 PMG2202 Coupling Cover
3 PMG1203 PMG2203 Pressure Plate (1/4”)
4 PMG1204 PMG2204 Cross Knife
5 PMG1205 PMG2205 Holder
6 PMG1206 PMG2206 Spiral Propeller
7 PMG1207 PMG2207 Plunger
8 PMG1208 PMG2208 Teflon Washer
9 PMG1209 PMG2209 Grinder Head
10 PMG1210 PMG2210 Feeder Pan
11 PMG1211 PMG2211 Meat Stuffer
12 PMG1212 PMG2212 Oil Bearing
13 PMG1213 PMG2213 Flush Mount Screws
14 PMG1214 PMG2214 Hub Attachment
15 PMG1215 PMG2215 Thumb Screw
16 PMG1216 PMG2216 Gear Box
17 PMG1217 PMG2217 Worm Gear
18 PMG1218 PMG2218 Motor
19 PMG1219 PMG2219 Oil Seal
20 PMG1220 PMG2220 Worm Shaft
21 PMG1221 PMG2221 Ball Bearing
22 PMG1222 PMG2222 Spacer
23 PMG1223 PMG2223 Worm Gear
24 PMG1224 PMG2224 Spacer
25 PMG1225 PMG2225 Ball Bearing
26 PMG1226 PMG2226 C-Type Snap Ring
27 PMG1227 PMG2227 Oil Cover
28 PMG1228 PMG2228 Flush Mount Screws
29 PMG1229 PMG2229 Grinder Housing
30 PMG1230 PMG2230 Meat Tray Support
31 PMG1231 PMG2231 Allen Bolts
32 PMG1232 PMG2232 Handle
33 PMG1233 PMG2233 Grease Taper (M12 x 14)
34 PMG1234 PMG2234 Power Cord and Plug
35 PMG1235 PMG2235 Strain Relief
36 PMG1236 PMG2236 Reset Switch Assembly
37 PMG1237 PMG2237 Switch Assembly
38 PMG1238 PMG2238 Cable Tie
39 PMG1239 PMG2239 Foot Screws (Set 4)
40 PMG1240 PMG2240 Base Cover
41 PMG1241 PMG2241 Rubber Feet (Set 4)
42 PMG1242 PMG2242 Start Capacitor
13-HBV-003 MeatGrinerOperatorsManual_2.indd 2 7/10/13 7:40 PM

hebvest.com t 407.274.4146 |f 407.264.6309 |[e-mail]
diagrams #12 and # 22 Electric Meat Grinders
explodedview
wiringdiagram
0908
07
06
05
04
03
02
01
18
17
27
12
11
10
13 14 15 16 20 21 22 23 24 25
19
26
39
37
42
36
35
34
40
41
38
43
28
29
30
31
32
33
44
45
13-HBV-003 MeatGrinerOperatorsManual_2.indd 3 7/10/13 7:40 PM

hebvest.com t 407.274.4146 |f 407.264.6309 |[e-mail]
use #12 and # 22 Electric Meat Grinders
function&purpose:
operation:
troubleshooting:
This unit is intended to be used for the grinding of boneless and skinless
meat products in commercial foodservice operations only.
Before using all surfaces and parts must be cleaned and dried thoroughly.
• Plug the equipment into a properly grounded electrical supply
matching the nameplate rating.
• Before grinding, tighten the thumb screw (Callout No. 36) until secure.
Do not use a tool to tighten the thumb screw. Hand tighten only.
• Use meat stuffer (Call out No. 2) to push food product
into the grinder chamber.
• Permanently lubricated gearbox is equipped with sufficient
grease for several years of operation. There is no need to
add any additional grease.
• If grinder becomes overloaded the reset switch (Callout No. 42)
needs to be manually reset once the unit has cooled down.
• After each use unplug equipment, turn off and let it cool down
before cleaning or moving.
Problem Possible Solution
Erratic or slow output Blade is in backwards
Metal ends break off blade Blade is in backwards
Grinder stops operating or motor sounds sluggish Grinder is overloaded or coupling
cover (part 4) is too tight
13-HBV-003 MeatGrinerOperatorsManual_2.indd 4 7/10/13 7:40 PM