HeliArtist 450 scale fuselage User manual

1

2
Thank you for buying HeliArtist Products.450 scale fuselage is designed as
an easy way to assembly. Please read this instruction manual carefully
before assembling the model,and follow all precautions and
recommendations in the manual.
ake sure to retain the manual for future reference,routine
maintenance,and tuning.This scale fuselage is designed for T-REX450
Helicopter series. You can easily put it on your T-REX450 for new clothing.
I PORTANT NOTES
R/C helicopters are not toys. R/C helicopter utilize various high-tech
products and technologies to provide superior performance.
Improper use of this product can result in serious injury or even
death. Please read this manual carefully before using and make sure
to be conscious of your personal safety and the safety of others and
your environment when operating all HeliArtist products.
anufacturer and seller assume no liability for the operation or the
use of this product. Intended usage of this fuselage is only for adults
with experience of flying remote control helicopters at legal flying
field. After the sale of this product we cannot maintain any control
over its operation or usage.
After assembling the scale fuselage,the weight will increase and the
structure will become more complex,so we do not recommmend to
have any 3D fly as to avoid any accident and damage.
R/C products require a certain degree of skill to operate,and is a
consumables item.Any damage or dissatisfaction as a result of
accidents or modifications are not covered by any warranty and
cannot be returned for repair or experience problems during
operation or maintenance.
Fly only in safe areas,away from other people.Do not operate R/C aircraft
within the vicinity of homes or crowds of people.
R/C aircraft are prone to accidents,failures,and crashes due to a variety of
reasons including lack of maintenance,pilot error,and radio interference.
Pilots are responsible for their actions and damage or injury happened
during the operation or as a result of R/C aircraft models.

3
BEFORE ASSE BLING
1:Check for all the parts in the list come with the manual.
2:Some basic tools are needed to help the assembly.
450scale fuselage suitable for T-REX450 Nitro Helicopter series
TOOL
1:Cutter knife. 2:Hexagon
screw driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.
6:Silicone
7:CA glue. 8:AB glue
9:Fine sandpaper.
10:Scissors.
1:Wheel control arms x4 。 13:Hex Cap Screw:2x5mm x4 。 25:Self-Tapping Screw: 2x10mm x2 。
2:Linkage ball x5 。 14:2mm washer x2-2*6*22 。 26:Horizontal Stabilizer x2 。
3:Hex cap screw 2x18mm x1 。 15:Carbon Rods ￠2x40mm x2 。 27:Small Vertical Stabilizer x2 。
4:Nuts 2mm x5 。 16:CNC Retract System x2 。 28:Self-Tapping Screw :2x5mm x4 。
5:Hex cap screw 2x10mm x7 。 17:Wood servo mount x1 。 29:Large Machine Gun x2 。
6:Ball Links x6 。 18:Self-tapping Screw :2x8mm x2 。30:Small Machine Gun x2 。
7:Linkage Rods ￠1.5x175mm x2 。19:Wood pieces 3x12x5 x8 。 31:Machine Gun Rod x2 。
8:Linkage Rods ￠1.5x20mm x1 。 20:Sponge for tai lx1 。 32:Gun Cover Plate x2 。
9:Retract system stand x2 。 21:Hex Cap Screw 2x18mm 33:Front Window Cover x1 。
10:CNC Retract System x1 22:Washer ￠2x ￠5x0.5mmx4
11:3mmLock Rings x4 。 23:Nuts 2mm x4 。
12:Carbon Rods ￠3x62mm x3 。 24:Vertical Stabilizer x1 。

4
Put the Front Retract System into the fuselage
body and align the screw holes of Retract
System Stands to the holes on the bottom of
the fuselage body.
Assemble the Front CNC Retract System using
4x100mm Carbon Rod and two Retract system
stands.
Tighten the Ball Links with Linkage Ball to
the Wheel Control Arm caution the assembly
direction.(Use M3x10mm Screws x4)
Insert the Linkage Rods with Ball Link.
Stick the wood pieces on the CNC front
system.
12
34
Twist the Ball Links from Step 1. onto the
Linkage Rods. (Caution the assembly
direction.)

5
After assembled the Heli body to the fuselage
then glue the Wood Servo Mount onto the
fuseages using epoxyand tighten the Linkage
Ball on the Servo Horn.
Glue the wood together according to the
above photo. (Remarks: the hight of the
wood block is depend on what heli you use.)
Tighten the Lock Rings on the two end of the
Front Retract System Carbon Rod then Insert
the Wheel Control Arms next to the Lock Ring
End and secure them with gule and M3 Set
Screws.
Tighten the Back Retract Systems onto the
Carbon Rods together with two Lock Ring on
each side of Retract System.
Insert the 4x55mm Carbon Rods into the
specific position of the Gun Housing and secure
it with glue. (This is used to prevent further
retraction of the Retract System.)
Use M3x10mm screws x4 with M3 Nuts to
tighten the Front Retract System onto the
fuselage body.

6
Assemble the tail gear box back to the Heli
Mechanism.
Assemble the Tail Cover back to the fuselage.
Disassemble the tail gear box of the Heli
mechanism then insert the Heli Body into the
fuselage.
Disassemble the Tail Cover from the tail of the
fuselage.
Align and glue the Wood Blocks to the landing
gear position on the Heli Body.
Put the Sponge in the tail.

7
Assemble the Vertical stabilizer to the
fuselage's tail using two 3x20mm Self-Tapping
Screws.
Align the Heli Body to the fuselage and drill
four 3mm holes on the bottom side. Use
M3x25mm screws and washers to secure the
Heli Body to the fuselage.
Use four 2x5mm Self-Tapping screws to secure
the vertical stabilizers.
Glue the Machine Guns onto the gun position
of the fuselage.
Fit the Horizontal stabilizers onto the trough
on the Tail Boom of the fuselage and use
epoxy to secure them. (Remarks: make sure
the Horizontal stabilizers are in perpendicular
condition.)
Stick the Rockets Jane under the kit.
(The Rockets Jane is In addition to buy)

8
Glue the Gun Cover Plates onto the Machine
Guns.
Cut the Front Window Cover as to fit the front
window on the Front Canopy. Then glue the
cut covers onto this window positions.
(Remarks: glue all window covers on the
inner side of the window.)

9

10