HeliArtist HA-TGA01 User manual

Thank you for buying HeliArtist Products.600 scale fuselage is designed as an easy way
to assembly.
Please read this Instruction manual carefully before assembling the model,and follow all
precautions and recommendations in the manual. ake sure to retain the manual for
future reference,routine maintenance,and tuning.
This scale fuselage is designed for TREX600E/Nitro Helicopter series.You can easily put
it on your TREX600E/Nitro for new clothing.
I PORTANT NOTES
R/C helicopters are not toys.R/C helicopter utilize various hightech products and
technologies to provide superior performance.
Improper use of this product can result in serious injury or even death.Please read this
manual carefully before using and make sure to be conscious of your personal safety
and the safety of others and your environment when operating all HeliArtist products.
anufacturer and seller assume no liability for the operation or the use of this
product.Intended usage of this fuselage is only for adults with experience of flying
remote control helicopters at legal flying field.After the sale of this product we cannot
maintain any control over its operation or usage.
After assembling the scale fuselage,the weight will increase and the structure will
become more complex,so we do not recommmend to have any 3D fly as to avoid any
accident and damage.
R/C products require a certain degree of skill to operate,and is a consumables item.Any
damage or dissatisfaction as a result of accidents or modifications are not covered by
any warranty and cannot be returned for repair or experience problems during operation
or maintenance.
Fly only in safe areas,away from other people.Do not operate R/C aircraft within
the vicinity of homes or crowds of people.
R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons
including lack of maintenance,pilot error,and radio interference.
Pilots are responsible for their actions and damage or injury happened during the
operation or as a result of R/C aircraft models.

600scale fuselage,suitable for T-REX600 EPS Helicopter series.
BEFORE ASSE BLING
1:Check for all the parts in the list come with the manual.
2:Some basic tools are needed to help the assembly.
TOOL
1:Cutter knife. 2:Hexagon screw
driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.
6:Silicone 7:CA glue. 8:AB glue
9:Fine sandpaper.10:Scissors.
1 、 Front Landing Gear x2psc 2.Back Landing Gear x1psc ， 3 、 Sponge for Body X1PCS ，
4 、 Sponge for tail X1PCS ， 5 、 Transition tail gearbox x1PCS ， 6 、 183mmTransition Tail Boom x1pcs,
7 、 Tail Control Guide x1PCS, 8 、 Transition Gear 109mm x1pcs, 9 、 Transition Gear drive x1pcs,
10 、 100x18x6mm Plastic Spacer X2PCS ， 11 、 47mm main frame rod x2pcs ，
12 、 228mm Extense tail linkage rod x1pcs ， 13 、 Ball-Ling x2pcs ，
14 、 Wings X2PCS, 15 、 Rocket X2PCS, 16 、 issile X2PCS ，
17 、 Wood pieces for tail x5pcs ， 18 、 Horizontal Stabilizer X1pcs,
19 、 Horizontal Stabilizer X2PS ， 20 、 Decorative Fin X1PCS,
21 、 Front Landing Gear cover X2PCS ， 22 、 Torque Tube Guide x2pcs ，
23 、 achine Gun X1PCS, 24 、 2mm carbon fiber main frame x2pcs,
25 、 Hex Cap Screw3x8mmx12pcs, 26 、 Hex Cap Screw 3x12mm x2pcs,
27 、 Self-Tapping Screw3x10mm X2PCS, 28 、 Combination self-Tapping Screw3x10 X4PCS,
29 、 Hex Cap Screw3x20mm x4pcs, 30 、 Self-Tapping Screw 2x6mm X22PCS, 31 、 Decal
11 12
13 14 15 16
17 18
9
19 20
1
21
26
25
22 23 24
6
10
234
8
7
27 28
29 30 31

like
Fix the parts on the carbon
fiber main frame like the
picture.
Remove the tail and wait for
installed.
Glue the tail with the body or fix
them with wood pieces by Self-
Tapping Screw 2x6mm .
Use the screw from the Tripod to
lock the 100x18x6mm plastic pad on
the body.
Install the Transition Tail Boom
and the Transition tail gearbox.
When you installed all of the
parts,Adjusted each Servo midpoint,
and the rod length.
4
8
9
Fix the tail with the body and fix the
Tail Control Guide like the picture.
Fix the Front Landing Gear
with Hex Cap Screw 3x20 .
Fix the Back Landing Gear with
Self-Tapping Screw 3x10 .
7
12
3
56

Remove the parts like the picture in
order to facilitate Installation.
Fix the body with Self-
Tapping Screw 2x6mm .
Installed again the parts was
removed from picture no.10 .
Your install will look like
this picture when you
finished.
Install the Extense tail
linkage rod and the triangle
rocker.
Put the Transition Tail Boom's
support sponge in the tail like
the picture.
Fix the Sponge for Body with the body
and put it into the body.
10
0
14
15
Install the Transition tail
cover with Self-Tapping Screw
2x6mm.
11
0
12 13
16 17

22
Glue the Horizontal Stabilizer with
AB glue.
Fix the Horizontal Stabilizer with
Self-Tapping Screw3x10mm.
Glue all the film like the
picture.
Glue the Rocket issile on the
wing with AB glue.
Glue the Decorative Fin
with AB glue.
23
Glue the wings on the body like the
picture with AB glue.
20
18 19
21
Glue the achine Gun and the Landing
Gear.
24
25
Glue the seat in the body with AB glue.

End