HeliArtist atrwolf User manual

1

2
Thank you for buying HeliArtist Products.600 scale fuselage is designed as an easy way to assembly. Please read
this instruction manual carefully before assembling the model,and follow all precautions and recommendations in
the manual.Make sure to retain the manual for future reference,routine maintenance,and tuning.This scale
fuselage is designed for T-REX 600E/Nitro Helicopter series.You can easily put it on your T-REX600E/Nitro for new
clothing.
IMPORTANT NOTES
R/C helicopters are not toys.R/C helicopter utilize various high-tech products and technologies to provide
superior performance.Improper use of this product can result in serious injury or even death.Please read this
manual carefully before using and make sure to be conscious of your personal safety and the safety of others and
your environment when operating all HeliArtist products.
Manufacturer and seller assume no liability for the operation or the use of this product.Intended usage of this
fuselage is only for adults with experience of flying remote control helicopters at legal flying field.After the sale of
this product we cannot maintain any control over its operation or usage.
After assembling the scale fuselage,the weight will increase and the structure will become more complex,so we do
not recommmend to have any 3D fly as to avoid any accident and damage.
R/C products require a certain degree of skill to operate,and is a consumables item.Any damage or dissatisfaction
as a result of accidents or modifications are not covered by any warranty and cannot be returned for repair or
experience problems during operation or maintenance.

3
600scale fuselge,suitable for T-REX600 E/Nitro Helicopter series
BEFORE ASSE BLING
1:Check for all the parts in the list shown at bellow.
2:Some basic tools are needed to help the assembly.
TOOL
1:Cutter knife. 2:Hexagon screw driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.6:Silicone
7:CA glue. 8:AB glue(epoxy) 9:Fine sandpaper.
10:Scissors.
Fly only in safe areas,away from other people.Do not operate R/C aircraft within the vicinity of homes or crowds of
people.R/C aircraft are prone to accidents,failures,and crashes due to a variety of reasons including lack of
maintenance,pilot error,and radio interference.Pilots are responsible for their actions and damage or injury
happened during the operation or as a result of R/C aircraft models.
1:Ball Links x6 12:M3 Set Screws x4 23:Horizontal Stabilizer x2 (Left and Ri ht)
2:Wheel control arms x5 13:Carbon Rods ￠5x110mm x2 24:Small Vertical Stabilizer x2
3:Screws M3x10mm x5 14:Carbon Rods ￠4x55mm x2 25:Self-Tappin Screws 2x5mm x4
4:Linka e Rods ￠2.5x100mm x2 15:4mmLock Rin x2 26:Lar e Machine Gun x2
5:Linka e Rods ￠2.5x360mm x2 16:Wood servo mount x1 27:Small Machine Gun x2
6:CNC Retract System x3 17:Wood Piece Set 28:Machine Gun Rod x2
7:Retract system stand x2 18:Hex Cap Screws M3x25mm x4 29:Gun Cover Plate x2(Left and Ri ht)
8:Carbon Rods ￠4x100mm x1 19:Washers ￠3x ￠10x0.8mm x2 30:Upper Window Cover x2(L&R) 。
9:M3 Nut x4 20:M3 Nuts x4 31:Front Window Cover x1
10:Screws M3x10mm x4 21:Vertical Stabilizer x1 32:Bottom Window Cover x2(L&R)
11:5mmLock Rin s x4 22:Self-Tappin Screws 3x20mm x2

4
Insert the 4x55mm Carbon Rods into the specific position
of the Gun Housin and secure it with lue. (This is used to
prevent further retraction of the Retract System.)
Use M3x10mm screws x4 with M3 Nuts to ti hten the Front
Retract System onto the fusela e body.
Put the Front Retract System into the fusela e body and
ali n the screw holes of Retract System Stands to the
holes on the bottom of the fusela e body.
Assemble the Front CNC Retract System usin 4x100mm
Carbon Rod and two Retract system stands.
Ti hten the Ball Links with Linka e Ball to the Wheel
Control Arm, caution the assembly direction.(Use
M3x10mm Screws x4)
Twist the Ball Links from Step 1. onto the Linka e Rods.
(Caution the assembly direction.)
12
34
56

5
Disassemble the Tail Cover from the tail of the fusela e.
Ali n and lue the Wood Blocks to the landin ear
position on the Heli Body.
Glue the wood to ether accordin to the above photo.
(Remarks: the hi ht of the wood block is depend on what
heli you use.)
After assembled the Heli body to the fusela e then lue
the Wood Servo Mount onto the fusea es usin epoxyand
ti hten the Linka e Ball on the Servo Horn.
Ti hten the Lock Rin s on the two end of the Front
Retract System Carbon Rod then Insert the Wheel Control
Arms next to the Lock Rin End and secure them with
ule and M3 Set Screws. (Used Parts: Screw M2x10mm
x4, ￠4mmLock Rin x2, M3Set Screw x2 ）
Ti hten the Back Retract Systems onto the Carbon Rods
to ether with two Lock Rin on each side of Retract
System. (Used Parts: ￠5mmLock Rin x4,Carbon Rods ￠
5x110mm x2 and M3 Set Screws x2. ）
7
910
11 12
8

6
Assemble the Vertical stabilizer to the fusela e's tail usin
two 3x20mm Self-Tappin Screws.
Ali n the Heli Body to the fusela e and drill four 3mm
holes on the bottom side. Use M3x25mm screws and
washers to secure the Heli Body to the fusela e.
Assemble the Tail Cover back to the fusela e.
Disassemble the tail ear box of the Heli mechanism then
insert the Heli Body into the fusela e.
Assemble the tail ear box back to the Heli Mechanism.
Fit the Horizontal stabilizers onto the trou h on the Tail
Boom of the fusela e and use epoxy to secure them.
(Remarks: make sure the Horizontal stabilizers are in
perpendicular condition.)
13 14
15 16
17 18

7
End of Manual
Use four 2x5mm Self-Tappin screws to secure the vertical
stabilizers.
Glue the Machine Guns onto the un position of the
fusela e.
Glue the Gun Cover Plates onto the Machine Guns. Cut the Upper Window covers as to fit the specific windows
on the Front Canopy. Then lue the cut covers onto these
window positions.(Remarks: lue all window covers on the
inner side of the window.)
Cut the Front Window Cover as to fit the front window on
the Front Canopy. Then lue the cut covers onto this
window positions.(Remarks: lue all window covers on the
inner side of the window.)
Cut the Bottom Window covers as to fit the specific
windows on the Front Canopy. Then lue the cut covers
onto these window positions.(Remarks: lue all window
covers on the inner side of the window.)
19 20
21 22
23 24