4
Pre-Installation Instructions
HiBoost’s Plus booster unit and antennas must be strategically placed in order
to perform and provide maximum coverage.
The Plus booster features a built-in indoor antenna and an expansion indoor
antenna port so users can customize their solution.
Note: The Plus booster can split amplified signal twice – please review the
antenna expansion methods for more information
The HiBoost Signal Supervisor app will allow users to communicate to the Plus
signal booster via Wi-Fi. It will also allow users to communicate with your
booster locally via Bluetooth connection. Once registered, the user can install,
optimize and remotely monitor the Plus signal booster. If there is no Wi-Fi or
Bluetooth connection, please reference the LCD installation method.
Note: Signal Supervisor enabled boosters must have access to a strong Wi-Fi
network – If Wi-Fi is not available, users can connect to the booster with
Bluetooth.
Professional Installation Tips:
•For a fast and optimize installation, it is strongly recommended that
users install HiBoost products using the Signal Supervisor mobile
application
•Completely read the user manual and gather all necessary tools,
material and accessories before installing the booster
•A “soft installation” is recommended before permanently mounting
any equipment – this technique will simplify the installation process by
allowing users to identify any potential installation issues beforehand
•The Signal Supervisor App integrates a tool that will help users locate
the best location for the outdoor antenna – ensure that there is at
least 20 ft of vertical separation between outdoor antenna and indoor
antennas (including the plus booster)
