HighPoint SSD7580B User manual

1
SSD7580B
8x U.2 Port to PCIe 4.0x16 NVMe RAID Controller
Quick Installation Guide
V1.00

2
System Requirements
PC Requirements
•System with a free PCIe4.0 (or 3.0) x16 slot
•Windows 10/11, Windows Server 2016, Windows Server 2019,
Windows Server 2022, Microsoft Hyper-V
•Linux kernel 3.10 and later
SSD7580B Kit Content
•SSD7580B Controller Card
•Quick Installation Guide
•Low Profile bracket

3
SSD7580B Hardware
Front View
PCIe 4.0 x16 Host Interface
SFF-8654 ports

4
Hardware Installation:
1. The SSD7580B provides four device ports which utilize SFF-8654
connectors. These ports accept a variety of HighPoint Certified
Cable Accessories (see the Accessories section towards the end of
this guide for more information). The following procedure explains
how to connect U.2 NVMe SSDs directly to the SSD7580B using
HighPoint TS8i-8639-060 NVMe cables.
SFF-8654 ports

5
2. Shown above is an SFF-8654 to U.2 SFF-8639 cable with a 15-pin
SATA power connector. The SFF-8639 port should be connected to
the NVMe SSD’s U.2 port. The 15 pin SATA power connector
should be connected to the system’s power supply.
3. Insert the SSD7580B controller into one of the motherboard’s open
PCI-E 4.0x16 slots.
SFF-8654
SFF-8639
SATA-15pin
TS8i-8639-060
NVMe cable

6
4. As described in step 2, connect the SFF-8639 cable connectors to
the U.2 SSDs. Next, connect the SFF-8654 cable connector to one
of the SSD7580B’s four device ports (Ports 1 through 4).

7
SFF-8639
15-pin SATA power connector

8
5. Connect the remaining NVMe SSDs to the SSD7580B controller as
described above. Once complete, Power on the system.
Note: Please make sure the cables are securely connected to the
SSD7580B’s device ports and the NVMe SSDs or backplane. Loose
connections can lead to a variety of problems including instability,
slower than expected performance and broken RAID arrays or dropped
disks.
Note: Make sure the controller’s device driver has been installed before
physically installing the controller and NVMe SSDs. Driver and RAID
Management Installation Guides are available from the Documentation
section of the product’s webpage.

9
Optional Certified Cable Accessories
8654-8643-210
SFF-8654 to SFF-8643 NVMe cable,
1meter length
The 8654-8643-210 is an external SFF-
8654 (host) to SFF-8643 (device) PCIe 4.0
x8 NVMe cable; each cable can host up to
2x NVMe SSDs.
8654-8611-205
SFF-8654 to SFF-8611 NVMe cable,
0.5meter length
The 8654-8611-205 is an external SFF-
8654 (host) to SFF-8611 (device) PCIe 4.0
x8 NVMe cable; each cable can host up to
2x NVMe SSDs via an SFF-8611 Oculink
connection.

10
Resources
A variety of manuals, guides and FAQs are available for the SSD7580B
RAID controller.
In addition, we recommend visiting the Software Downloads webpage
for the latest drivers, management interfaces, and installation guides.
Software Download:
SSD7580B Driver, WebGUI, Installation Guides:
https://www.highpoint-tech.com/ssd7580b-overview
Other Reference Information:
Motherboard & NVMe SSD Compatibility List
SSD7580B User Guides
https://www.highpoint-tech.com/ssd7580b-overview

11
Customer Support
If you encounter any problems while utilizing the SSD7580B, or have
any questions about this or any other HighPoint Technologies, Inc.
product, feel free to contact our Customer Support Department.
Web Support:
https://www.highpoint-tech.com/support-and-services
HighPoint Technologies, Inc. websites:
https://www.highpoint-tech.com
© Copyright 2022 HighPoint Technologies, Inc. All rights reserved.