HIK VISION DS-K2M061 User manual

DS-K2M061 Secure Door Control Unit
User Manual

Legal Informaon
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( hps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH
ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
DS-K2M061 Secure Door Control Unit User Manual
i

PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognion features, biometrics data is stored in your device with encrypon
method; for ngerprint device, only ngerprint template will be saved, which is impossible to
reconstruct a ngerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data protecon laws and regulaons, including without limitaon, conducng
security controls to safeguard personal data, such as, implemenng reasonable administrave and
physical security controls, conduct periodic reviews and assessments of the eecveness of your
security controls.
DS-K2M061 Secure Door Control Unit User Manual
ii

Safety Instrucon
Dangers
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• An all-pole mains switch shall be incorporated in the electrical installaon of the building.
• Do not connect several devices to one power adapter as adapter overload may cause over-heat
or re hazard.
• If smoke, odors or noise rise from the device, turn o the power at once and unplug the power
cable, and then please contact the service center.
• Shock hazard! Disconnect all power sources before maintenance.
• If the product does not work properly, please contact your dealer or the nearest service center.
Never aempt to disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cauons
• The equipment has been designed, when required, modied for connecon to an IT power
distribuon system.
• This equipment is suitable for mounng on concrete or other non-combusble surface only.
• The serial port of the equipment is used for debugging only.
•• Install the equipment according to the instrucons in this manual.
• To prevent injury, this equipment must be securely aached to the oor/wall in accordance
with the installaon instrucons.
• No naked ame sources, such as lighted candles, should be placed on the equipment.
• Do not place the device in extremely hot (refer to the specicaon of the device for the detailed
operang temperature), cold, dusty or damp locaons, and do not expose it to high
electromagnec radiaon.
• The device cover for indoor use shall be kept from rain and moisture.
• Exposing the equipment to direct sun light, low venlaon or heat source such as heater or
radiator is forbidden (ignorance can cause re danger).
• Please use a so and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
• Please keep all wrappers aer unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transportaon without the
original wrapper may result in damage on the device and lead to addional costs.
DS-K2M061 Secure Door Control Unit User Manual
iii

Available Models
Product Name Product Model
Secure Door Control Unit DS-K2M061
DS-K2M061 Secure Door Control Unit User Manual
iv

Contents
Chapter 1 Overview .................................................................................................................... 1
1.1 Product Introducon .............................................................................................................. 1
1.2 Appearance Introducon ....................................................................................................... 2
Chapter 2 Interface Descripon .................................................................................................. 3
2.1 Cable Interface Descripon .................................................................................................... 3
2.2 Wiegand Interface Descripon .............................................................................................. 4
Chapter 3 Wiring Descripon ...................................................................................................... 5
Chapter 4 Installaon ................................................................................................................. 6
4.1 DIP Switch Descripon ........................................................................................................... 6
4.2 Install Secure Door Control Unit ............................................................................................ 7
Appendix A. Dimension .............................................................................................................. 9
Appendix B. Communicaon Matrix and Device Command ...................................................... 10
DS-K2M061 Secure Door Control Unit User Manual
v

Chapter 1 Overview
1.1 Product Introducon
Figure 1-1 Appearance
Secure door control unit (hereinaer referred as "unit"), is to keep the door in the status before
the access control terminal is crashed when the access control terminal is crashed or damaged by
external force.
Secure door control unit is the middle layer between access control terminal and door lock in the
access control system. The top side can be connected to access control terminal, and the boom
side can be connected to door contact, door magnec, exit buon, Wiegand card readers and
other external devices. Equipped with access control equipment, it is safer to control the door.
DS-K2M061 Secure Door Control Unit User Manual
1

1.2 Appearance Introducon
Figure 1-2 Appearance Descripon
Table 1-1 Appearance Descripon
No. Descripon
1 LED indicator. The LED indicator only includes the power
indicator (POWER). When the indicator light is solid red, it
indicates the device is powered on.
2 Cable Interface
3 Debugging Port
Note
The debugging port is for debugging use only.
4 Tamper
5 Wiegand Interface
6 DIP Switch
DS-K2M061 Secure Door Control Unit User Manual
2

Chapter 2 Interface Descripon
Connect access control devices, secure door control unit, door locks, and other related output
devices ( you can choose connect Wiegand card reader) to establish communicaon.
2.1 Cable Interface Descripon
Figure 2-1 Cable Interface Descripon
Table 2-1 Cable Interface Descripon
Group No. Cable No. Color Name Descripon
Group A A1 Red +12 V Power Input
A2 Black GND
Group B B1 Yellow RS-485+ RS-485
B2 Blue RS-485-
Group C C1 Red/Green FIRE+ FIRE
C2 Red/Green FIRE-
Group D D1 Yellow/Blue ALM_IN1 Alarm Input
D2 Black GND
D3 Yellow/Orange ALM_IN2
DS-K2M061 Secure Door Control Unit User Manual
3

Group No. Cable No. Color Name Descripon
D4 Black GND
D5 Yellow/Purple ALM_NC Alarm Output
D6 Yellow/Brown ALM_COM
D7 Yellow/Red ALM_NO
D8 Yellow/Green DOOR_SENSOR Door Magnec
Input
D9 Black GND
D10 Yellow/Grey DOOR_BUTTON Exit Buon
D11 Black GND
D12 White/Purple DOOR_NC Door Lock Output
D13 White/Yellow DOOR_COM
D14 White/Red DOOR_NO
2.2 Wiegand Interface Descripon
Figure 2-2 Wiegand Interface Descripon
Table 2-2 Wiegand Interface Descripon
Group Cable No. Color Name Descripon
Group E E1 Brown OK Access Wiegand
Card Reader
E2 Purple BZ
E3 Orange ERR
E4 Green W0
E5 White W1
E6 Black GND
DS-K2M061 Secure Door Control Unit User Manual
4

Chapter 3 Wiring Descripon
The wiring of external devices is as following.
Figure 3-1 External Devices Wiring Descripon
DS-K2M061 Secure Door Control Unit User Manual
5

Chapter 4 Installaon
Before installing the secure door control unit, please set the DIP switch and connect it with the
cable.
4.1 DIP Switch Descripon
Refer to Appearance Introducon for the posion of DIP switch. DIP switch descripon is as shown
in the following gure. No. 1 to 4 in the gure are switch No.
Figure 4-1 DIP Switch Descripon
DIP switch meaning is as shown in the following table.
Table 4-1 DIP Switch Meaning
Icon Meaning
Represent 0 in binary mode
Represent 1 in binary mode
As shown in the gure below, the binary number represented by the DIP switch 1234 is 0011,
which is the decimal address: 3.
DS-K2M061 Secure Door Control Unit User Manual
6

Figure 4-2 DIP Switch（Binary 0011）
Note
• The DIP switch No. 1 to 3 are suitable for seng the RS-485 communicaon address. No. 4 is for
Wiegand mode (OFF: Wiegand input, ON: Wiegand output).
• The DIP address cannot be repeated.
4.2 Install Secure Door Control Unit
Steps
1. Set the DIP of the secure door control unit according to the actual access control device
requirements.
Note
The DIP binary ranges from 0001 to 1111.
2. Drill holes on the wall or other places according to the mounng template.
Note
The minimum bearing weight of the wall or other places should be three mes heavier than the
device weight.
3. Insert the provided plasc sleeve of the A4 expansion screw into the punched hole.
4. Insert the cable into the cable socket, and insert the Wiegand cable into the Wiegand interface.
Cauon
If the cable needs to be connected from the side of the device, knock out the knockout hole on
one side.
5. Align the screw holes on both sides of the device with the sleeve in the wall and insert the
provided screws to x the device.
DS-K2M061 Secure Door Control Unit User Manual
7

Figure 4-3 Install Secure Door Control Unit
DS-K2M061 Secure Door Control Unit User Manual
8

Appendix A. Dimension
Figure A-1 Dimension
DS-K2M061 Secure Door Control Unit User Manual
9

Appendix B. Communicaon Matrix and Device
Command
Communicaon Matrix
Scan the following QR code to get the device communicaon matrix.
Note that the matrix contains all communicaon ports of Hikvision access control and video
intercom devices.
Figure B-1 QR Code of Communicaon Matrix
Device Command
Scan the following QR code to get the device common serial port commands.
Note that the command list contains all commonly used serial ports commands for all Hikvision
access control and video intercom devices.
Figure B-2 Device Command
DS-K2M061 Secure Door Control Unit User Manual
10

UD21173B