HIK VISION DS-K1T606MF User manual

Face Recognition Terminal
Quick Start Guide
Device Wiring (Without Secure Door Control Unit)
Installation Environment:
If Installing the device indoors, the device should be at least 2
meters away from the light, and at least 3 meters away from
the window or door.
Make sure the environment illumination is more than 100 lux.
Direct Sunlight
Direct Sunlight
through Window
Indirect Sunlight
through Window
Dimensions:
Backlight
©2018 Hangzhou Hikvision Digital Technology Co., Ltd.
It includes instructions on how to use the Product. The software embodied
in the Product is governed by the user license agreement covering that
Product.
About this Manual
This Manual is subject to domestic and international copyright protection.
Hangzhou Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all
rights to this manual. This manual cannot be reproduced, changed,
translated, or distributed, partially or wholly, by any means, without the
prior written permission of Hikvision.
Trademarks
and other Hikvision marks are the property of Hikvision and
are registered trademarks or the subject of applications for the same by
Hikvision and/or its affiliates. Other trad owners. No right of license is
given to use such trademarks without express permission.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE,
IS PROVIDED “AS IS,” WITH ALL FAULTS AND ERRORS, AND HIKVISION
MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO
EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR
AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR
LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF
THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF
PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT
TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT
LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO
ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION
SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
UD09017B-B
Note: The figures are for reference only.
10 Lux ＞1200 Lux100~850 Lux
1
2
3
Notes:
1. The installation height here is the recommended height. You can change it according to your
actual needs.
2. You can also install the device on the wall or other places without the gang box. For details, refer
to the User Manual.
3. For easy installation, drill holes on mounting surface according to the supplied mounting template.
Drill holes on the wall or other surface according to the mounting template and
install the gang box (80mm×80mm).
Use two supplied screws to secure the mounting plate on the gang box.
Use another four supplied screws to secure the mounting plate on the wall.
Route the cables through the cable hole of the mounting plate, and connect to the
corresponding external devices’cables.
Remove the screw at the bottom of the device, and align the terminal with the
mounting plate and buckle them together.
Use a hex wrench to fasten the screw at the bottom.
Before you start:
1. According to the baseline on the mounting template, stick the mounting
template on the wall or other surface, 1.4 meters higher than the ground.
2. Connect the supplied cable to the device terminals on the device rear panel.
Steps:
3m
Gang BoxMounting Template
1
32
孔1 孔1
孔2
孔2 孔2
孔3
孔2
孔3
孔1 孔1
推荐距地面1.40米，可根据身高进行调整。
将该贴纸贴在要安装的位置,根据图标来做打孔、布
线等操作；
产品最大尺寸为该贴纸最大轮廓边向外偏移10mm；
孔1：墙面固定孔；孔2：暗盒固定孔；孔3：出线孔。
Mounting PlateDevice Wall
Display Screen
Fingerprint Module
and
Card Swiping Area
Indicator
Loudspeaker
Micro SIM
Card Slot Network Interface
USB Interface
35mm
281.18mm
113mm 45mm
Wiring Terminals
Power Interface
2m
Notes:
1. When connecting door magnetic sensor and exit button, the device and the
RS-485 card reader should use the common ground connection.
2. The Wiegand terminal displayed here is a Wiegand input terminal. You should set
the face recognition terminals Wiegand direction to“Input.”If you should connect to
an access controller, you should set the Wiegand direction to“Output.”For details, see
Setting Wiegand Parameters in Section 7.3.1 Communication Settings.
1Installation
2
2.1

Activation
Activating via Device
Power on and wire the network cable after installation.
You should activate the device before the first login.
If the device is not activated yet, it will enter the Activate Device page
after powering on.
1. Create a password and confirm the password.
2. Tap Activate to activate the device.
Note: For other activation methods, see the device user manual.
1. Tap the settings icon at the lower right corner of the initial
page and input the activation password to enter the main page.
2. Enter the User Management page, tap + to enter the Add User
page.
4. Tap Face and collect the face information according to the
instructions.
You can view the captured picture at the upper right corner of
the page. Make sure the face picture is in good quality and size.
For details about the tips and positions when collecting or
comparing the face picture, see the contents on the right.
5. If the picture is in good condition, tap Save to save the picture.
Or tap Try Again to take another face picture.
6. Tap to save the settings.
Go back to the initial page to start authentication.
For other authentication methods, see the device user manual.
Adding Face Information Positions When Collecting/
Comparing Face Picture
(Recommended Distance: 0.5m)
Tips When Collecting/
Comparing Face Picture
Expression
Posture
Size
1.4m
0.5m
1.4m
Too High
Too Low
Too Close Too Far
1.4m
0.5m
1.4m
Make sure your face is in the middle of the collecting window.
Correct Tilt RaiseSide Bow
0.5m 0.5m
激活设备
Activate Device
Password
Confirm
8 to 16 characters
Passwords should be the same
Activate
Recommended Height:
1.43m to 1.90m
Correct Too Close Too Far
1.4m
Too
Close Too Far
Correct
0.5m
Height:
1.43m to 1.90m
Move
Back and Forth
Note: Two or more of the following characters
are allowed: digit, number, and symbol.
Note: The device will not support the fingerprint collection
function if the device model contains F.
Recommended:
Use 1:1 Face Matching when the face is hard to recognize.
Use other authentication methods if the device if affected by the light
or other items.
1:1 Matching: The device will compare the captured face picture with
the ones in the database.
1:N Matching: The device will compare the captured face picture with
the input employee ID linked face picture.
Notes:
If you require a higher security level, do not use single authentication.
If you adopt multiple authentications mode, you should authenticate
other methods before authenticating face.
This product and, if applicable, the supplied accessories too are
marked with “CE” and comply therefore with the applicable
harmonized European standards listed under the RE Direcve
2014/53/EU, the EMC Direcve 2014/30/EU, the RoHS Direcve
2011/65/EU.
2006/66/EC (baery direcve): This product contains a baery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentaon for specific
baery informaon. The baery is marked with this symbol,
which may include leering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the baery to your
supplier or to a designated collecon point. For more
informaon see: www.recyclethis.info
2012/19/EU (WEEE direcve): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collecon points. For
more informaon see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is
subject to the following two condions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitaon est autorisée aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est suscepble d'en compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmier by
Industry Canada. To reduce potenal radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur radio peut
fonconner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé
pour l'émeeur par Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intenon des autres ulisateurs, il faut choisir le type d'antenne et
son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator and your body.
Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le
radiateur et votre corps.
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operaon.
EU Conformity Statement
Regulatory Information
FCC Information
Please take aenon that changes or modificaon not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucons, may cause harmful
interference to radio communicaons. However, there is no guarantee that interference
will not occur in a parcular installaon. If this equipment does cause harmful
interference to radio or television recepon, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance of 20 cm
between the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operaon is subject to the
following two condions:
Device Wiring (With Secure Door Control Unit)
In order to get a good quality and accurate face picture, position your
face looking at the camera when collecting or comparing face pictures.
Keep your expression natural when collecting or comparing face
pictures, just like the expression in the picture on the right.
Do not wear a hat, sunglasses, or other accessories
that can affect the facial recognition function.
Do not have your hair cover your eyes, ears, etc.
and heavy makeup is not allowed.
STRONG PASSWORD RECOMMENDED –
We highly recommend that you create a strong password of your own
choosing (using a minimum of eight characters, including upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your
product. We also recommend that you reset your password regularly. Especially in a
high security system, resetting the password monthly or weekly can better protect
your product.
Secure Door Control Unit
Wiring Terminal
Note: The secure door control unit should connect to an external power supply separately.
Exit Buon
Power Input
SENSOR
BUTTON
B1
B2
B3
B4
Green/Brown
Black
Green/Black
Black
Lock Output
NC C1
C2
C3
COM
NC
White/Purple
White/Black
White/Red
Red
Black Door Magnec
Exit Buon
NO
Power
Electric Dropbolt
Electric Strike
Sensor Input
Face Recognition Terminal
4
2.2 3
Scan the QR code to get the user manual
for detailed information.
Note that mobile data charges may apply
if Wi-Fi is unavailable.
Use only power supplies listed in the user instrucons:
Model Manufacturer Standard
C2000IC12.0-24P-DE
C2000IC12.0-24P-GB
MOSO Power Supply Technology Co., Ltd. CEE
MOSO Power Supply Technology Co., Ltd. BS
ADS-24S-12 1224GPG Shenzhen Honor Electronic Co., Ltd. CEE
NO