HIK VISION DS-KB8113-IME1(B) Series User manual

DS-KB8113-IME1(B) Series Vandal-Resistant
Door Saon
User Manual

Legal Inormaon
©2023 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes insrucons for using and managing the Product. Pictures, charts, images and
all other inormaon hereinafer are for descripon and explanaon only. The inormaon
contained in the Manual is subject to change, without noce, due to rmware updates or other
reasons. Please nd the latest version of this Manual at the Hikvision website ( htps://
www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of professionals trained in supporng the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properes of
Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS
INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
i

DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
Data Proecon
During the use of device, personal data will be collected, stored and processed. To protect data,
the development of Hikvision devices incorporates privacy by design principles. For example, for
device with facial recognion features, biometrics data is stored in your device with encrypon
method; for ngerprindevice, only ngerprintemplate will be saved, which is impossible to
reconstruct a ngerprinimage.
As data controller, you are advised to collect, store, process and transfer data in accordance with
the applicable data proecon laws and regulaons, including without limiaon, conducng
security controls to safeguard personal data, such as, implemenng reasonable adminisrave and
physical security controls, conduct periodic reviews and assessments of the eecveness of your
security controls.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
ii

Symbol Convenons
The symbols that may be found in this document are dened as follows.
Symbol Descripon
Danger
Indicates a hazardous siuaon which, if not avoided, will or could
result in death or serious injury.
Cauon
Indicates a poenally hazardous siuaon which, if not avoided, could
result in equipment damage, data loss, performance degradaon, or
unexpected results.
Note Provides addional inormaon to emphasize or supplement
important points of the main text.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
iii

Safety Insrucon
Warning
●All the electronic operaon should be strictly compliance with the electrical safety regulaons,
re prevenon regulaons and other related regulaons in your local region.
●Please use the power adapter, which is provided by normal company. The power consumpon
cannot be less than the required value.
●Do not connect several devices to one power adapter as adapter overload may cause over-heat
or re hazard.
●Please make sure that the power has been disconnected before you wire, install or dismantle the
device.
●When the product is installed on wall or ceiling, the device shall be rmly xed.
●If smoke, odors or noise rise from the device, turn othe power at once and unplug the power
cable, and then please contact the service center.
●If the product does not work properly, please contact your dealer or the nearest service center.
Never aempto disassemble the device yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cauon
●Do not drop the device or subject it to physical shock, and do not expose it to high
elecromagnesm radiaon. Avoid the equipment insallaon on vibraons surface or places
subject to shock (ignorance can cause equipment damage).
●Do not place the device in extremely hot (refer to the specicaon of the device for the detailed
operang temperature), cold, dusty or damp locaons, and do not expose it to high
elecromagnec radiaon.
●The device cover for indoor use shall be kept from rain and moisture.
●Exposing the equipment to direct sun light, low venlaon or heat source such as heater or
radiator is forbidden (ignorance can cause re danger).
●Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a maluncon however), and aecng the endurance of sensor at the
same me.
●Please use the provided glove when open up the device cover, avoid direct contact with the
device cover, because the acidic sweat of the ngers may erode the surface coang of the device
cover.
●Please use a sof and dry cloth when clean inside and outside surfaces of the device cover, do
not use alkaline detergents.
●Please keep all wrappers afer unpack them for future use. In case of any failure occurred, you
need to return the device to the factory with the original wrapper. Transporaon without the
original wrapper may result in damage on the device and lead to addional costs.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
iv

●Improper use or replacement of the baery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used baeries according to the insrucons provided by
the baery manufacturer.
●Improper replacement of the baery with an incorrect type may defeat a safeguard (for
example, in case of some lithium baery types).
●Do not dispose of the baery into re or a hot oven, or mechanically crush or cut the baery,
which may result in an explosion.
●Do not leave the baery in an extremely high temperature surrounding environment, which may
result in an explosion or leakage of ammable liquid or gas.
●Do not subject the baery to extremely low air pressure, which may result in an explosion or the
leakage of ammable liquid or gas.
●CAUTION: Risk of explosion if the baery is replaced by an incorrect type.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
v

Regulatory Inormaon
FCC Inormaon
Please take aenon that changes or modicaon not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable proecon against harmful interference in a residenal insallaon. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the insrucons, may cause harmful interference to radio communicaons. However, there is
no guarantee that interference will not occur in a parcular insallaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning
the equipment oand on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierenfrom that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
vi

under the EMC Direcve 2014/30/EU, RE Direcve 2014/53/EU,the RoHS Direcve
2011/65/EU
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed
of as unsorted municipal waste in the European Union. For proper recycling, return
this product to your local supplier upon the purchase of equivalent new equipment,
or dispose of it at designated collecon points. For more inormaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documenaon for specic baery inormaon. The baery is marked with this
symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury
(Hg). For proper recycling, return the baery to your supplier or to a designated
collecon point. For more inormaon see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to
the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired
operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploiaon est autorisée aux deux condions suivantes :
1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisaeur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est suscepble d'en compromere le onconnemen.
Under Industry Canada regulaons, this radio ransmier may only operate using an antenna of a
type and maximum (or lesser) gain approved for the ransmier by Industry Canada. To reduce
poenal radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communicaon.
Conformément à la réglemenaon d'Industrie Canada, le présent émeeur radio peut onconner
avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'inenon des
autres ulisaeurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communicaon sasaisane.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
vii

Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur et
votre corps.
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
viii

Contents
Chapter 1 Appearance ................................................................................................................ 1
Chapter 2 Terminal and Wiring Descripon ................................................................................. 3
2.1 Terminal Descripon .............................................................................................................. 3
2.2 Wiring Descripon ................................................................................................................. 4
2.2.1 Door Lock Wiring .......................................................................................................... 4
2.2.2 Door Contact Wiring ..................................................................................................... 5
2.2.3 Exit Buon Wiring ......................................................................................................... 5
2.2.4 Alarm Device Input Wiring ............................................................................................ 7
Chapter 3 Door Saon Insallaon ............................................................................................. 8
3.1 Wall Mounng Plate .............................................................................................................. 8
3.2 Wall Mounng ....................................................................................................................... 8
Chapter 4 AcvaeDevice via Web ........................................................................................... 14
Chapter 5 Remote Conguraon via Indoor Saon .................................................................. 15
5.1 Set Up Door Saon via Indoor Saon ................................................................................ 15
5.2 Local Operaon .................................................................................................................... 15
Chapter 6 Remote Conguraon via Mobile Client ................................................................... 17
6.1 Set Up Mobile Client ............................................................................................................ 17
6.2 Set Up Door Saon via Client .............................................................................................. 17
6.3 Remote Operaon via Client ................................................................................................ 18
Chapter 7 Remote Conguraon via Web ................................................................................. 22
7.1 Live View .............................................................................................................................. 22
7.2 User Management ............................................................................................................... 22
7.3 Device Management ............................................................................................................ 23
7.4 Conguraon ....................................................................................................................... 24
7.4.1 Local Parameters Setngs ........................................................................................... 24
7.4.2 System Setngs ........................................................................................................... 25
DS-KB8113-IME1(B) Series Vandal-Resistant Door Saon User Manual
ix