HIK VISION DS-KD8003-IME2 User manual

Module Door Staon
User Manual
UD30508B

Legal Informaon
©2022 Hangzhou Hikvision Digital Technology Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instrucons for using and managing the
Product. Pictures, charts, images and all other informaon
hereinaer are for descripon and explanaon only. The
informaon contained in the Manual is subject to change,
without noce, due to rmware updates or other reasons. Please
nd the latest version of this Manual at the Hikvision website
( hps://www.hikvision.com/ ).
Please use this Manual with the guidance and assistance of
professionals trained in supporng the Product.
Trademarks
and other Hikvision's trademarks
and logos are the properes of Hikvision in various jurisdicons.
Other trademarks and logos menoned are the properes of
their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH
ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT
YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA,
CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN
CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET
PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL
NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN
A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
i

PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE
THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE
CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND
THE APPLICABLE LAW, THE LATTER PREVAILS.
Data Protecon
During the use of device, personal data will be collected, stored
and processed. To protect data, the development of Hikvision
devices incorporates privacy by design principles. For example,
for device with facial recognion features, biometrics data is
stored in your device with encrypon method; for ngerprint
device, only ngerprint template will be saved, which is
impossible to reconstruct a ngerprint image.
As data controller, you are advised to collect, store, process and
transfer data in accordance with the applicable data protecon
laws and regulaons, including without limitaon, conducng
security controls to safeguard personal data, such as,
implemenng reasonable administrave and physical security
controls, conduct periodic reviews and assessments of the
eecveness of your security controls.
ii

Symbol Convenons
The symbols that may be found in this document are dened as
follows.
Symbol Descripon
Danger Indicates a hazardous situaon which, if not avoided,
will or could result in death or serious injury.
Cauon
Indicates a potenally hazardous situaon which, if
not avoided, could result in equipment damage, data
loss, performance degradaon, or unexpected
results.
Note Provides addional informaon to emphasize or
supplement important points of the main text.
iii

Regulatory Informaon
FCC Informaon
Please take aenon that changes or modicaon not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference
to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaon.
EU Conformity Statement
iv

This product and - if applicable - the supplied
accessories too are marked with "CE" and
comply therefore with the applicable
harmonized European standards listed under
the EMC Direcve 2014/30/EU, the RoHS
Direcve 2011/65/EU
2012/19/EU (WEEE direcve): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European
Union. For proper recycling, return this product
to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at
designated collecon points. For more
informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product
contains a baery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaon for
specic baery informaon. The baery is
marked with this symbol, which may include
leering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the
baery to your supplier or to a designated
collecon point. For more informaon
see:www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards
requirements.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operaon is subject to the following two condions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference
that may cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitaon
est autorisée aux deux condions suivantes :
1. l'appareil ne doit pas produire de brouillage, et
2. l'ulisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est suscepble d'en
compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may
only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmier by Industry Canada. To reduce
potenal radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for
successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent
émeeur radio peut fonconner avec une antenne d'un type et
d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intenon des autres ulisateurs, il faut choisir
v

le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
nécessaire à l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
Cet équipement doit être installé et ulisé à une distance
minimale de 20 cm entre le radiateur et votre corps.
Power Source Detail
The power source should be qualied and meet limited power
source or PS2 requirements according to IEC 60950-1 or IEC
62368-1 standard.
vi

Contents
1 Introducon ............................................................. 1
2 Appearance .............................................................. 1
3 Terminal and Wiring ................................................. 7
3.1 Terminal Descripon ............................................. 7
3.2 Module Door Staon Wiring ............................... 10
3.2.1 Door Lock Wiring ....................................... 10
3.2.2 Door Contact Wiring .................................. 11
3.2.3 Exit Buon Wiring ...................................... 11
3.2.4 RS-485 Card Reader Wiring ....................... 11
4 Installaon ............................................................. 12
4.1 Congure Sub Module Address .......................... 12
4.2 Two-Module Installaon ..................................... 13
4.2.1 Two-Module Surface Mounng ................. 13
4.2.2 Two-Module Flush Mounng .................... 16
4.3 Three-Module Installaon .................................. 19
4.3.1 Three-Module Surface Installaon ............ 19
4.3.2 Three-Module Flush Mounng .................. 22
4.4 More-Than-Three Module Installaon ............... 25
4.4.1 More-than-Three Module Surface Mounng
............................................................................. 25
4.4.2 More-Than-Three Module Flush Mounng
............................................................................. 29
5 Acvaon ............................................................... 34
5.1 Acvate Device via Client Soware .................... 34
5.2 Edit Network Parameters .................................... 35
6 Remote Conguraon via Web ............................... 35
6.1 Live View ............................................................. 35
6.2 User Management .............................................. 36
6.3 Device Management ........................................... 36
vii

6.4 Remote Conguraon ......................................... 37
6.4.1 Local Parameters Sengs .......................... 37
6.4.2 System Sengs .......................................... 38
6.4.3 Network Sengs ....................................... 40
6.4.4 Video & Audio Sengs .............................. 43
6.4.5 Image Sengs ........................................... 44
6.4.6 Event Sengs ............................................ 47
6.4.7 Schedule Sengs ....................................... 48
6.4.8 Intercom Sengs ....................................... 49
6.4.9 Access Control Sengs .............................. 53
6.4.10 Theme Sengs ........................................ 54
7 Conguraon via Client Soware ............................ 55
7.1 Device Management ........................................... 55
7.1.1 Add Online Device ..................................... 55
7.1.2 Add Device by IP Address .......................... 56
7.1.3 Add Device by IP Segment ......................... 56
7.2 Live View via Door Staon .................................. 56
7.3 Remote Conguraon ......................................... 57
7.3.1 Device Management .................................. 57
7.3.2 Local Parameters Sengs .......................... 57
7.3.3 System Sengs .......................................... 58
7.3.4 Network Sengs ....................................... 61
7.3.5 Video & Audio Sengs .............................. 63
7.3.6 Image Sengs ........................................... 65
7.3.7 Schedule Sengs ....................................... 67
7.3.8 Intercom Sengs ....................................... 68
7.3.9 Access Control Sengs .............................. 71
7.4 Organizaon Management ................................. 73
7.4.1 Add Organizaon ....................................... 73
7.4.2 Modify and Delete Organizaon ................ 74
viii

7.5 Person Management ........................................... 74
7.5.1 Add Person ................................................ 74
7.5.2 Modify and Delete Person ......................... 75
7.5.3 Import and Export Person Informaon ...... 75
7.5.4 Get Person Informaon from Device ......... 76
7.5.5 Change Person to Other Organizaon ....... 76
7.5.6 Issue Card in Batch .................................... 76
8 Video Intercom Operaon ...................................... 77
8.1 Video Intercom Operaon via Device ................. 77
8.1.1 Call Resident .............................................. 77
8.1.2 Issue Card .................................................. 79
8.1.3 Unlock Door ............................................... 79
8.2 Video Intercom Operaon via Client Soware ... 80
8.2.1 Receive Call from Door Staon .................. 80
8.2.2 Live View via Door Staon ......................... 81
8.2.3 View Call Logs ............................................ 81
8.2.4 Search Video Intercom Informaon .......... 82
A. Relevant Instrucons for External Power Supply and
Wiring of 2-wire Video Intercom Products (2020-1-20)
.................................................................................. 85
B. Communicaon Matrix and Device Command ....... 88
ix