HIK VISION DS-22CE12DFT-PIRXOF User manual

User Manual
- -
- -

- -
-
- -

-
-
-

- -
-
1
1.1 Product Features
-
-
1.2 Overview
1.2.1 Overview of Type I Camera
Figure 1-1
Note:
1.2.2 Overview of Type II Camera
Figure 1-2
Note:

2
-
-
2.1 Installation of Type I Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
1.
2.
Figure 2-1
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
3.
4.
Figure 2-2

Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall/ceiling, expansion bolts are
required to fix the camera. For wooden
wall/ceiling, self-tapping screws are required.
5.
6.
Figure 2-3 -
2.1.2 Ceiling/Wall Mounting with Junction Box
1. Paste the drill template on the .
2. Drill screw holes and the cable hole on the
according to the drill template.
Figure 2-4
3. Take apart the junction box, and align the screw
holes of the camera with those on the Junction
cover.
4. Attach with
supplied screws.
Figure 2-5 Attach the Camera on the Junction B
Cover
5.

Figure 2-6 Secure the Junction Box on the Wall/Ceiling
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7. Combine the junction box cover with its body.
Figure 2-7 Combine the Junction Box Cover back to its
Body
8. Repeat the step 5 to 6 of 2.1.1
to finish the
installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Junction Box
1.
Figure 2-8
2. Pry the mounting base by using a flat object, for
example, a coin.
Figure 2-9

3.
Figure 2-10
Note:
Drill the cable hole, when adopting the ceiling outlet
to route the cable.
4.
Figure 2-11
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
5.
6. Install the camera back to the mounting base and
secure it.
Figure 2-12 Install the Camera Back
7.
8.
Rotation Position
[0° to 360°]
Pan Position
[0° to 360°]
Tilt Position
[0° to 75°]
Figure 2-13 3-Axis Adjustment
1).
2).

3).
2.2.2
Ceiling/Wall Mounting with Junction Box
1.
2.
Figure 2-14
3.
4.
Figure 2-15
5.
Figure 2-16
6. Route the cables through the bottom cable hole, or
the side cable hole of the junction box.
7.

8.
Figure 2-17