HIK VISION DS-2CC102P(N)-IR1(IR3)(IR5) User manual

Day / Night IR Color Camera
User Manual
V2.1.0
1

Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer.
This manual is applicable to DS-2CC102P(N)-IR1(IR3)(IR5), DS-2CC112P(N)-IR1(IR3)(IR5),
DS-2CC192P(N)-IR1(IR3)(IR5), DS-2CC102P(N)-IR, DS-2CC112P(N)-IR, DS-2CC192P(N)-IR,
DS-2CC102P(N)-IRA, DS-2CC112P(N)-IRA, DS-2CC192P(N)-IRA, DS-2CC102P(N)-IRT,
DS-2CC112P(N)-IRT, DS-2CC192P(N)-IRT, DS-2CC502P(N)-IR1(IR3), DS-2CC512P(N)-IR1(IR3),
DS-2CC592P(N)-IR1(IR3), DS-2CC502P(N)-IR, DS-2CC512P(N)-IR, DS-2CC592P(N)-IR,
DS-2CC502P(N)-IMB, DS-2CC572P(N)-IMB IR color cameras.
This manual may contain several technically incorrect places or printing errors, and the content is subject to
change without notice. The updates will be added into the new version of this manual. We will readily improve or
update the products or procedures described in the manual.
2

Safety Instructions
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may cause if any of the warnings is neglected.
Cautions: Injury or equipment damage may cause if any of the cautions is neglected.
Warnings Follow these safeguards
to prevent serious injury or
death.
Cautions Follow these precautions
to prevent potential injury or
material damage.
Warnings
1. In the use of the product, you must be strict compliance with the electrical safety regulations of the nation and
region.
2. Input voltage should meet both the SELV(Safety Extra Low Voltage) and the Limited Power Source with DC
12V according to the IEC60950－1 standard. Please refer to technical specifications for detail information.
3. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard.
4. Please make sure that the plug is firmly connected on the power socket.
5. When the product is mounted on wall or ceiling, the device shall be firmly fixed.
6. If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service center. Never attempt
to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.)
3

Cautions：
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch CCD (Charge Coupled Device) modules with fingers. If cleaning is necessary, use clean cloth
with a bit of ethanol and wipe it gently. If the camera will not be used for an extended period, please turn on
the lens cap to protect the CCD from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur otherwise (which is
not a malfunction however), and affecting the endurance of CCD at the same time.
5. The CCD may be burned out by a laser beam, so when any laser equipment is on using, make sure that the
surface of CCD will not be exposed to the laser beam.
6. Do not place the camera in extremely hot, cold(the operating temperature shall be－20℃～＋60℃), dusty
or damp locations, and do not expose it to high electromagnetism radiation.
7. To avoid heat accumulation, good ventilation is required for operating environment.
8. Keep the camera away from liquid while on using.
9. While on a delivery, the camera shall be packed in its original packing, or packing of the same texture.
10. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment shall be replaced
regularly according to their average enduring time. The average time varies because of differences between
operating environment and using history, so regular checking is recommended for all the users. Please
contact with your dealer for more details.
4

5
Table of Contents
C H A P T E R 1 Introduction.........................................................1
1.1 Features................................................................................... 2
1.2 IR Dome Camera................................................................... 2
1.3 10m/30m/50m IR Box Camera ............................................ 3
1.4 100m/110m IR Box Camera ................................................. 4
1.5 IR Varifocal Box Camera ...................................................... 4
C H A P T E R 2 Installation ...........................................................5
2.1 IR Dome Camera Installation Diagram.............................. 6
2.2 Rear Panel .............................................................................. 7
2.3 Power Supply.......................................................................... 8
2.4 IR Control ................................................................................ 8
Appendix Specifications.............................................................9
3.1 Table 1................................................................................... 10
3.2 Table 2................................................................................... 11
3.3 Table 3................................................................................... 12
3.4 Table 4................................................................................... 13
3.5 Table 5................................................................................... 14
3.6 Table 6................................................................................... 15
3.7 Table 7................................................................................... 16

C H APT E R 1 Introduction
1

1.1 Features
Adopting high performance CCD and advanced print circuit board design technology, the camera features high
resolution, low distortion, low noise, etc., and thus is extremely applicable to the surveillance system and image
processing system.
IR night vision, day/night surveillance;
High color reproducibility;
Low illumination;
Automatic electronic Shutter;
Backlight compensation
High SNR;
Automatic electronic gain;
1.2 IR Dome Camera
Figure. 1 Infrared Dome Camera
2

1.3 10m/30m/50m IR Box Camera
Figure. 2 Infrared Box Camera
3

1.4 100m/110m IR Box Camera
Figure. 3 Infrared Box Camera
1.5 IR Varifocal Box Camera
Figure. 4 Infrared Varifocal Box Camera
4

C H A PT E R 2 Installation
5