HIK VISION DS-2CC51D5S-AVPIR3 User manual

0
‘
Camera
User Manual
HD-SDI Camera
UD.6L0201D1325A01

HD-SDI Camera·User Manual
1
1
Thank you for purchasing our product. If there are any questions, or requests,
please do not hesitate to contact the dealer.
This manual applies to DS-2CC51D5S-AVPIR3, DS-2CC52D5S-IRM,
DS-2CC52D5S-IT3, and DS-2CC52D5S-VPIR.
This manual may contain several technical incorrect places or printing errors, and
the content is subject to change without notice. The updates will be added to the
new version of this manual. We will readily improve or update the products or
procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or
reliability of the security or signaling aspects of this product. UL has only tested
for fire, shock or casualty hazards as outlined in UL’s Standard(s) for Safety,
UL60950-1. UL Certification does not cover the performance or reliability of the
security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS,
WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED
FUNCTIONS OF THIS PRODUCT.
0100001040108

HD-SDI Camera·User Manual
2
2
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the
limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too
are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the
Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new

HD-SDI Camera·User Manual
3
3
equipment, or dispose of it at designated collection points. For more information
see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a
battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product
documentation for specific battery information. The battery
is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly
to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are
neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are
neglected.
Warnings Follow these
safeguards to prevent serious
injury or death.
Cautions Follow these precautions
to prevent potential injury or
material damage.

HD-SDI Camera·User Manual
4
4
Warnings
In the use of the product, you must be in strict compliance with the electrical
safety regulations of the nation and region.
Please refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the
Limited Power Source with AC 24V or DC 12V according to the IEC60950-1
standard. Please refer to technical specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may
cause over-heating or a fire hazard.
Please make sure that the plug is firmly connected to the power socket.
When the product is mounted on wall or ceiling, the device shall be firmly
fixed.
If smoke, odor or noise rise from the device, turn off the power at once and
unplug the power cable, and then please contact the service center.
If the product does not work properly, please contact your dealer or the
nearest service center. Never attempt to disassemble the camera yourself.
(We shall not assume any responsibility for problems caused by unauthorized
repair or maintenance.)
Cautions
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.

HD-SDI Camera·User Manual
5
5
Do not touch senor modules with fingers. If cleaning is necessary, use clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for
an extended period, please replace the lens cap to protect the sensor from
dirt.
Do not aim the camera at the sun or extra bright places. Blooming or smearing
may occur otherwise (which is not a malfunction), and affect the endurance of
sensor at the same time.
The sensor may be burned out by a laser beam, so when any laser equipment
is in using, make sure that the surface of sensor will not be exposed to the
laser beam.
Do not place the camera in extremely hot, cold (the operating temperature
shall be-30℃~+60℃), dusty or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for operating
environment.
Keep the camera away from liquid while in use.
While in delivery, the camera shall be packed in its original packing, or packing
of the same texture.
Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries
according to the instructions provided by the battery manufacturer.

HD-SDI Camera·User Manual
6
6
Table of Contents
1 Introduction......................................................................................................8
1.1 Product Features ..............................................................................8
1.2 Overview..........................................................................................9
1.2.1 Overview of Dome Camera ....................................................9
1.2.2 Overview of Turret Camera ..................................................11
2 Installation......................................................................................................14
2.1 Installation of HD-SDI Dome Camera ..............................................14
2.1.1 Type I Dome Camera Installation..........................................14
2.1.2 Type II Dome Camera Installation.........................................20
2.2 Installation of HD-SDI Turret Camera ..............................................23
2.2.3 Type I Turret Camera Installation .........................................23
2.2.4 Type II Turret Camera Installation ........................................24
3 Menu Description ...........................................................................................28
3.1 SCENE.............................................................................................29
3.2 LENS ...............................................................................................29
3.3 EXPOSURE ......................................................................................30
3.3.1 Shutter ................................................................................30
3.3.2 AGC .....................................................................................31
3.3.3 SENS-UP...............................................................................31
3.3.4 Brightness............................................................................31
3.3.5 D-WDR.................................................................................32
3.3.6 Defog...................................................................................32
3.4 Backlight ........................................................................................33
3.5 White Balance (WB) .......................................................................37
3.6 Day & Night ....................................................................................38
3.7 NR ..................................................................................................39
3.8 SPECIAL ..........................................................................................41

HD-SDI Camera·User Manual
7
7
3.8.1 Camera Title ........................................................................41
3.8.2 D-effect................................................................................43
3.8.3 Motion ................................................................................45
3.8.4 Privacy .................................................................................47
3.8.5 Language .............................................................................48
3.8.6 Defect..................................................................................49
3.8.7 Version ................................................................................51
3.9 ADJUST...........................................................................................51
3.9.1 Sharpness ............................................................................52
3.9.2 Monitor ...............................................................................52
3.9.3 LSC.......................................................................................53
3.9.4 Video. Out ...........................................................................53
3.10 RESET ...........................................................................................54
3.11 EXIT ..............................................................................................54

HD-SDI Camera·User Manual
8
8
1Introduction
1.1 Product Features
This series of camera adopts high-sensitive sensor and advanced circuit board
design technology. It features high resolution, low distortion, and low noise
features, etc., which make it extremely suitable for surveillance system and
image process system.
The main features of HD-SDI cameras are as follows:
2 Megapixel high-performance CMOS sensor
Clear and detailed image of up to 1080p resolution
Low illumination: 0.01Lux @ (F1.2,AGC ON), 0 Lux with IR
IR cut filter auto switch
Auto white balance, auto gain control, and backlight compensation for
different surveillance environment
Support Digital Wide Dynamic Range (D-WDR) for backlighting surveillance
OSD menu, parameters are configurable
Ingress protection level reaches IP66

HD-SDI Camera·User Manual
9
9
1.2 Overview
1.2.1 Overview of Dome Camera
Figure 1-1 Overview of Type I Dome Camera

HD-SDI Camera·User Manual
10
10
Table 1-1 Description of Type I Dome Camera
No.
Description
No.
Description
1
Bubble
6
Power Cable
2
IR LED
7
Lens
3
Auxiliary Video Output
8
Adapter Plate
4
OK Button
9
Black Liner
5
SDI Cable
Figure 1-2 Overview of Type II Dome Camera

HD-SDI Camera·User Manual
11
11
Description of Type II Dome CameraTable 1-2
No.
Description
No.
Description
1
Mounting Base
5
IR LED
2
Menu Button
6
Lens
3
Black Liner
7
Power Cable
4
Bubble
8
Video Output
1.2.2 Overview of Turret Camera
Figure 1-3 Overview of Type I Turret Camera
Table 1-3 Description of Type I Turret Camera
No.
Description
No.
Description
1
Enclosure
4
CVBS Cable

HD-SDI Camera·User Manual
12
12
No.
Description
No.
Description
2
Mounting Base
5
Power Cable
3
Dome Drive
6
SDI Cable
Figure 1-4 Overview of Type II Turret Camera
Table 1-4 Description of Type II Turret Camera
No.
Description
No.
Description
1
Mounting Base
5
Power Cable

HD-SDI Camera·User Manual
13
13
No.
Description
No.
Description
2
Enclosure
6
CVBS Cable
3
Trim Ring
7
SDI Cable
4
Dome Drive

HD-SDI Camera·User Manual
14
14
2Installation
Before you start:
Please make sure that the device in the package is in good condition and all
the assembly parts are included.
Make sure that all the related equipment is power-off during the installation.
Check the specification of the products for the installation environment.
Check whether the power supply is matched with your required power
voltage to avoid damage.
If the product does not function properly, please contact your dealer or the
nearest service center. Do not disassemble the camera for repair or
maintenance by yourself.
Please make sure the wall is strong enough to withstand three times the
weight of the camera.
2.1 Installation of HD-SDI Dome Camera
2.1.1 Type I Dome Camera Installation
Steps:
1. Drill the screw holes on the ceiling according to the drill template.

HD-SDI Camera·User Manual
15
15
Figure 2-1 Drill Template
2. Loosen the set screws on the bubble with a hex key (supplied) to open the
bubble.
3. Remove the black liner.
Figure 2-2 Remove the Black Liner
4. Connect the corresponding power/video cables.
5. Fix the mounting base to the ceiling with the supplied screws.

HD-SDI Camera·User Manual
16
16
Figure 2-3 Fix the Mounting Base
If required, you can route cables through the side opening of the mounting base.
Figure 2-4 Side Opening
6. Adjust the surveillance angle.
1). View the camera image via the monitor.

HD-SDI Camera·User Manual
17
17
2). Loosen the lock screw besides the lens
3). Rotate the pan table to adjust the pan angle of the camera [0°~355°].
4). Push the dome drive backward or forward to adjust the tilt angle
[0~75°].
5). Rotate the lens to adjust the azimuth angle [0 ~355°]. Tighten the lock
screw.
Figure 2-5 3-axis Adjustment
7. Adjust the focus and zoom.
1). Adjust the Zoom Lever (T~W) to select a proper angle of view.
2). Adjust the Focus Level (F~N) to obtain a perfect image on the monitor.

HD-SDI Camera·User Manual
18
18
Figure 2-6 Adjust the Focus and the Zoom
Move the joystick leftward three times continuously, you can see the result of
the zoom and focus adjustment.
8. Install the black liner back.

HD-SDI Camera·User Manual
19
19
Figure 2-7 Install the Black Liner
9. Align the bubble to the mounting base and tighten the screws to fix it.
Figure 2-8 Bubble Reinstallation