HIK VISION DS-6300DI-JX Series User manual

DS-6300DI-JX Series Decoder
USER MANUAL
Version 3.2.0

User Manual of DS-6300DI-JX Decoder
1
Hikvision® Network Digital Video Recorder User’s Manual
This manual, as well as the software described in it, is furnished under license and may be used or copied only in
accordance with the terms of such license. The content of this manual is furnished for informational use only, is
subject to change without notice, and should not be construed as a commitment by Hikvision Digital Technology
Co., Ltd. (Hikvision). Hikvision assumes no responsibility or liability for any errors or inaccuracies that may
appear in the book.
Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written
permission of Hikvision.
HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
REGARDING THE HIKVISION SOFTWARE. HIKVISION DOES NOT WARRANT, GUARANTEE, OR
MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE
HIKVISION SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY,
CURRENTNESS, OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF
THE HIKVISION SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS
NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE
TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES (INCLUDING
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE HIKVISION
SOFTWARE EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

User Manual of DS-6300DI-JX Decoder
2
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the Low
Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC.
2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as
unsorted municipal waste in the European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to
your supplier or to a designated collection point. For more information see: www.recyclethis.info.
Description on Laser Specification
The optical disc drive such as DVD Super Multi (Double Layer) Drive 22X that is used in this computer is
equipped with laser. The classification label with the following sentence is affixed to the surface of the drive.
CLASS 1 LASER
PRODUCT TO IEC60825-1
LASER KLASSE 1
The drive with the above label is certified by the manufacturer that the drive complies with the requirement for
laser product on the date of manufacturing pursuant to article 21 of Code of Federal Regulations by the United
States ofAmerica, Department of Health & Human Services, Food and Drug Administration.
In other countries, the drive is certified to comply with the requirement pursuant to IEC 60825-1 and EN 60825-1
on class 1 laser product.
This computer is equipped with the optical disc drive in the following list according to the model.

User Manual of DS-6300DI-JX Decoder
3
Safety Warnings and Cautions
Please pay attention to the following warnings and cautions:
Hazardous Voltage may be present: Special measures and precautions must
be taken when using this device. Some potentials (voltages) on the device may
present a hazard to the user. This device should only be used by HIKVISION
Employees with knowledge and training in working with these types of
devices that contain live circuits.
Power Supply Hazardous Voltage: AC mains voltages are present within the power supply
assembly. This device must be connected to a UL approved, completely enclosed power supply, of
the proper rated voltage and current. No user serviceable parts inside the power supply.
System Grounding (Earthing): To avoid shock, ensure that allAC wiring is not exposed and that
the earth grounding is maintained. Ensure that any equipment to which this device will be attached
is also connected to properly wired grounded receptacles and are approved medical devices.
Power Connect and Disconnect: The AC power supply cord is the main
disconnect device to mains (AC power).The socket outlet shall be installed
near the equipment and shall be readily accessible.
Installation and Maintenance: Do not connect/disconnect any cables to or
perform installation/maintenance on this device during an electrical storm.
Power Cord Requirements: The connector that plugs into the wall outlet must be a

User Manual of DS-6300DI-JX Decoder
4
grounding-type male plug designed for use in your region. It must have certification marks
showing certification by an agency in your region. The connector that plugs into theAC receptacle
on the power supply must be an IEC 320, sheet C13, female connector. See the following website
for more information http://kropla.com/electric2.htm.
Lithium Battery: This device contains a Lithium Battery. There is a risk of
explosion if the battery is replaced by an incorrect type. Dispose of used
batteries according to the vendor’s instructions and in accordance with local
environmental regulations.
Perchlorate Material: Special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate. This notice is required by California Code of
Regulations, Title 22, Division 4.5, Chapter 33: Best Management Practices for Perchlorate
Materials. This device includes a battery which contains perchlorate material.
Taiwan battery recycling:
Please recycle batteries.
Thermal and Mechanical Injury: Some components such as heat sinks,
power regulators, and processors may be hot; care should be taken to avoid
contact with these components.
Electro Magnetic Interference: This equipment has not been tested for
compliance with emissions limits of FCC and similar international regulations. This device is not,
and may not be, offered for sale or lease, or sold, or leased until authorization from the United
States FCC or its equivalent in other countries has been obtained. Use of this equipment in a
residential location is prohibited. This equipment generates, uses and can radiate radio frequency
energy which may result in harmful interference to radio communications. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment on and off, the user is required to take measures to eliminate the interference or
discontinue the use of this equipment.
Lead Content:
Please recycle this device in a responsible manner. Refer to local
environmental regulations for proper recycling; do not dispose of
device in unsorted municipal waste.

User Manual of DS-6300DI-JX Decoder
5
Preventive and Cautionary Tips
Before connecting and operating your DVS, please be advised of the following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Keep all liquids away from the DVS.
•Please check the power supply to avoid the damage caused by voltage mismatch.
•Please make sure the DVS work in the allowed range of temperature and humidity.
•Please keep the device horizontal and avoid the installation under severe vibration environment.
•The dust board will cause a short circuit after damping; Please dedust regularly for the board, connector,
chassis fan etc with brush.
•Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.

User Manual of DS-6300DI-JX Decoder
6
TABLE OF CONTENTS
C H A P T E R 1........................................................................................................................ 8
Introduction............................................................................................................................... 8
1.1 Description ...................................................................................................................... 9
1.2 Features ........................................................................................................................... 9
C H A P T E R 2...................................................................................................................... 12
Panel & Connections............................................................................................................... 12
2.1 Front Panel .................................................................................................................... 13
2.2 Rear Panel...................................................................................................................... 13
2.3 Alarm Connections........................................................................................................ 14
2.3.1 Alarm Input Connections........................................................................................ 14
2.3.2 Alarm Output Connections..................................................................................... 15
2.3.3 Signal Line Connections......................................................................................... 15
C H A P T E R 3...................................................................................................................... 16
Network Parameters Configuration......................................................................................... 16
3.1 Connecting the decoder by Hyper Terminal Tools........................................................ 17
3.2 Network Configuration by Hyper Terminal.................................................................. 19
C H A P T E R 4...................................................................................................................... 21
Decoder Configuration and Operation by Client Software ..................................................... 21
4.1 Adding, Modifying and Deleting the Decoder.............................................................. 22
4.1.1 Adding the Decoder to the Client Software............................................................ 22
4.1.2 Deleting and Modifying the Decoder to the Client Software................................. 24
4.2 TV Wall Layout Settings............................................................................................... 24
4.3 Setting the Encoding Device for Decoding Channel..................................................... 26
4.4 Remote Setting for Decoders......................................................................................... 28
C H A P T E R 5...................................................................................................................... 29
Decoder Configuration & Operation by Web Browser........................................................... 29
5.1 Decoding Operation....................................................................................................... 31
5.1.2 Dynamic Decode.................................................................................................... 33

User Manual of DS-6300DI-JX Decoder
7
5.1.3 Cycle Decode.......................................................................................................... 34
5.1.4 Remote Playback.................................................................................................... 36
5.1.5 Global Switch for the Decoding Channels............................................................. 37
5.1.6 Image Scaling......................................................................................................... 37
5.1.7 Picture Overlay....................................................................................................... 38
5.1.8 Checking the Connection Status............................................................................. 38
5.1.9 Checking the Decode Channel Status..................................................................... 39
5.1.10 Checking the Display Channel Status .................................................................. 39
5.1.11 Transparent Channel............................................................................................. 40
5.2 Parameter Configuration for Decoder ........................................................................... 41
5.2.1 Checking Device Information ................................................................................ 41
5.2.2 Configuring Time Settings..................................................................................... 41
5.2.3 Configuring Basic Network Settings...................................................................... 42
5.2.4 Configuring Alarm Input / Output Settings............................................................ 42
5.2.5 Configuring Arming Time...................................................................................... 43
5.2.6 Managing User Account......................................................................................... 44
5.2.7 Rebooting, Upgrading and Restoring the Default Settings for the Decoder........... 44
C H A P T E R 6...................................................................................................................... 45
Appendix................................................................................................................................. 45
Appendix A Specification ................................................................................................... 46
Appendix B List of Third-party IP Cameras Access........................................................... 47
Appendix C FAQ................................................................................................................. 50
Appendix D Glossary.......................................................................................................... 51
Appendix E Revision History.............................................................................................. 52

User Manual of DS-6300DI-JX Decoder
8
C H A P T E R 1
Introduction

User Manual of DS-6300DI-JX Decoder
9
1.1 Description
Designed by referring to the ATCA (Advanced Telecommunications Computing Architecture) standard, the
DS-6400HDI-JX Series HD Rack-mounted Video Decoder is capable of decoding and outputting the 720P
high-definition video stream and outputting decoded images, and it supports multiple output modes via BNC/VGA
interfaces and various network transmission protocols. The Decoder has the capabilities such as voice talk, PTZ
control, etc., providing powerful support for the large-scale TV wall decoding service.
1.2 Features
Hardware Structure
Standard rack-mount structure with carrier-level ATCA chassis system;
Pluggable modular design provides high flexibility;
Up to 8 audio/video output modules can be mounted;
Dual-power supply redundancy (optional) ensures high stability and reliability of system running;
Support decoding output via BNC and VGA connectors.
Order Models
DS-6316DI-JX, DS-6324DI-JX, DS-6332DI-JX, DS-6340DI-JX, DS-6348DI-JX, DS-6356DI-JX and
DS-6364DI-JX.
The DS-6300DI-JX consists of the chassis and the audio/video output module.
Component
Model
Description
Chassis
DS-6364
Chassis, power adapter, etc.
Audio/Video Output Module
(Optional)
DS-6308DI-B
Each module provides 8 decoded
video outputs
Decoding
Decoding images and audio
Private H.264, standard H.264 and MPEG4 video compression methods;
Support PS, RTP and private customized encapsulation formats;
PAL and NTSC image formats;
Decoding video images at 720P, SVGA, VGA, 4CIF, DCIF, 2CIF, CIF or QCIF resolution;
G.722, G.711A and G.711U video compression methods.
Support decoded images with intelligent video analytics information;
Decoding Resources
Each DS-6308DI-B is capable of decoding 16 streams at CIF/8 streams at 4CIF/4 streams at 720P, and it
adopts 8 BNC and 4 VGAoutputs, of which BNC outputs support 1/2/4 multi-camera display, the main VGA
output supports 1/2/4/9/16 multi-camera display and other VGAoutputs support 1/2/4 multi-camera display.
Decoding Mode
Multiple bitrate transmission methods: support TCP, UDP, multi-cast and RTP transmission methods when
the private customized protocols are adopted; and support RTP over TCP and RTP over UDP when standard

User Manual of DS-6300DI-JX Decoder
10
H.264 and MPEG4 are adopted.
Dynamic decoding: dynamically input encoder’s IP address and switch decoding channels; maintain rapid
decoding and switch.
Cycle decoding: set multiple remote monitoring channels on a decoding channel, and the decoder is capable
of performing cycle decoding according to the configured sequence and time. The stream sources can be
obtained via remote access to the encoder or stream media server and decoded for local output. A maximum
of 64 channels are allowed for cycle decoding.
Obtain stream from stream media: receive real-time data by remote access to private stream media server,
and then decode stream for local output.
Remote playback of encoder’s record files: remote playback of record files by time or by file. Remotely
access to the encoder with storage capability, and directly obtain the record files from the encoder, and
finally decode for local output.
Passive decoding: the decoder passively receives stream sources form the other devices or software, and
then proceeds decoding and transmission.
Third-party IPCameraAccess
Multiple brands of IP cameras from different manufactures are supported: Sony, Panasonic, Sanyo, Axis, Bosch,
etc. Please refer to Appendix B.
Network
One 10M / 100M /1000Mbps self-adaptive UTP Ethernet interface.
Support TCP, UDP and MCAST network protocols.
Get allocated IP address, sub mask and gateway via DHCP server.
Accomplish auto time adjustment for decoder through NTP protocol.
Capable of searching decoder in real time through SADP software, as well as modifying the IP address, sub
mask, gateway of decoder and some other parameters.
Capable of accessing decoder by TELNET command to view device information, modify network
parameters, etc.
Alarm
Relay Alarm Input
The decoder provides alarm input/output ports in relay signal input mode which can be set to NO or NC. Up to
8 different arming periods can be set, in which the alarm occurs, the device is capable of triggering
corresponding alarm handling method, relay output and buzzer alarm, as well as upload to center, etc.
Relay Alarm Output
The relay alarm output can be connected to alarm devices for alarm response actions, e.g., combined aural and
visual alarm unit, etc., which is capable of proceeding alarm handling within the arming period.
Exception Handling
ExceptionAlarm Handling
Exception alarms include network disconnect alarm, IP address conflict alarm, illegal access alarm, etc.;
multiple alarm handling methods are supported: relay alarm output, buzzer alarm, upload to center, etc.
Exception Reboot
Software watchdog capability: for inspecting important threads and system resources of device; in case of

User Manual of DS-6300DI-JX Decoder
11
exceptions cannot be recovered, the device will be automatically rebooted.
Firmware watchdog: for inspecting the firmware of device; in case of exceptions in system task scheduling, the
device will be automatically rebooted.
UserAdministration
A maximum of 32 users can be created by the system, including 1 administrator and 31 users. The user name of
the administrator is admin, which cannot be modified, and the password is allowable to be modified by the
administrator only; no deletion of the administrator is allowed, and the administrator is authorized to set the
operation permissions for normal users.
SDK Interface
Transparent Channel
The decoder adopts the RS-232/RS-485 serial interface to realize transparent transmission. The data sent
remotely to the decoder via network can be transmitted by RS-232/RS-485 interface of decoder without any
handling, and the transparent channel of the decoder supports multi-cast transparent transmission as well, and
multiple transparent channels can be established simultaneously.
PTZ Control
Through SDK transparent channel, the PTZ of DVR or DVS can be remotely controlled.
Two-way Audio
The decoder is capable of realizing two-way audio with the remote client. When the client has submitted
application, the two-way audio between the client and decoder is created.

User Manual of DS-6300DI-JX Decoder
12
C H A P T E R 2
Panel & Connections

User Manual of DS-6300DI-JX Decoder
13
2.1 Front Panel
2.2 Rear Panel
Interface/Module
Description
1
Module
Audio/Video Output Module
2
POWER
Power LED indicator
LINK
Network connection LED indicator
Rx/Tx
Data transmitting/receiving status LED indicator
3
RS-232
Connect to RS-232 devices, e.g., PC, etc.
4
Module
Power Supply Module
5
Module
Fan Module

User Manual of DS-6300DI-JX Decoder
14
2.3 Alarm Connections
2.3.1 Alarm Input Connections
DS-6300DI-B supports the open/close relay input as the alarm input mode. For the alarm input signal not in open /
close relay signal mode, please follow the connections shown as below:
Alarm input connections for Emerson Alarm:
Alarm input connections for Normal Alarm:
Interface
Connections
1
POWER ON/OFF
Turn on/off the device
2
Power Supply
12V DC power supply
3
LINE IN/OUT
Connector for voice talk input/output
4
Audio Output
DB15 audio output interfaces corresponding to BNC video outputs; connect
to audio output device.
5
RS485
RS-485 serial interface
ALARM IN
8 alarm inputs
ALARM OUT
8 alarm outputs
6
VIDEO OUT
BNC connectors for video output
7
VGA Output
Connect to monitor
8
Audio Output
3.5mm audio output interfaces corresponding to VGA video outputs;
connect to audio output device.
9
LAN
10/100/1000Mbps self-adaptive UTP Ethernet interface
10
GND
Grounding

User Manual of DS-6300DI-JX Decoder
15
2.3.2 Alarm Output Connections
DS-6300DI-B supports the open/close relay input as the alarm output mode. The alarm input can be selected to NO
or NC. Different alarm output connection methods are applied to the AC or DC load, please refer to the following
diagram:
Alarm output connections diagram:
Please note the different connections of JJ1 shown above.
For DC load, JJ1ca be safely used both in NC and NO methods, and it is recommended to use within the limit of
12V/1A. For external AC input, JJ1 must be open. The motherboard provides two jumpers, each corresponding to
one alarm output. And both of two jumpers are factory set to be connected.
2.3.3 Signal Line Connections
DS-6300DI-B provides the green terminal plug for connecting signal lines. Follow the instructions shown below:
1. Disconnect the green terminal plug from the terminal socket on the device;
2. Use the standard screwdriver to loosen the screws on the plug, and then insert signal lines to the plug and under
the spring washers, and finally tighten the screws.
3. Connect the plug with signal lines to the corresponding green terminal socket.

User Manual of DS-6300DI-JX Decoder
16
C H A P T E R 3
Network Parameters Configuration

User Manual of DS-6300DI-JX Decoder
17
Purpose:
If you don’t know the IP address of the decoder and this is not the first time you use the decoder, you
can use SADP (IP finder) software or the Serial port tools to find out the IP address of the decoder and
to configure the IP address or other network parameters of it. It is recommended to change the default
IP address for the first time to use it.
This chapter aims to tell the procedures of using the Hyper Terminal Software to find and configure the
IP address and other parameters of the device.
For the operation of the SADP software, please refer to the User Manual of the SADP software.
Note:
For the first-time user, the default user name of DS-6300DI-JX is admin, and password is 12345. And
the default IP address is 192.0.0.64.
3.1 Connecting the decoder by Hyper Terminal
Tools
Purpose:
By connecting decoder and PC with serial line via RS-232 interface, run the Hyper Terminal application, you can
get and modify the network parameters of the decoder with serial commands.
Steps:
1. Run the Hyper Terminal application on your PC
2. Input a name (e.g. HK) and select an icon
3. Click OK to enter the next dialogue box.

User Manual of DS-6300DI-JX Decoder
18
4. Select COM1 in Connect using filed (Please select the COM port according to the real scenario.).
5. Click OK to enter the Properties dialogue box.
6. Set port parameters in COM1 Properties dialogue box shown as the following figure.
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
7. Click Apply and OK after the setup. Press Enter under Hyper Terminal interface.
When [root@dvrdvs/]# appears, the connection is established.

User Manual of DS-6300DI-JX Decoder
19
Disconnecting and saving the connection
When you disconnect the session, the following dialogue box pops out to ask you whether you want to save the
session. If you save the session, the name of the session is kept and when the next time you use the Hyper Terminal
Tools you can see an icon named with the session you saved.
3.2 Network Configuration by Hyper Terminal
After the successful connection of the Hyper Terminal, you can get to the operation interface of the hyper terminal
interface.